OH WTB: Short Bed Frame (Coil Spring)

[reb162]

Looking to buy a Short Bed Frame (coil spring) to replace my long bed frame which turned to rust dust.

I am really only looking for the frame including the engine cradle and all original cross members. I do not need all the other chassis and suspension, but will consider rolling chassis.

I'm planning to weld up my rusty cab, but would be open to cab / frame combos if the cab is rust free.

Willing to travel distance to pick up.

[Possmguts]

This one is on CL https://cleveland.craigslist.org/pts/5491630634.html

[Possmguts]

also this one for the cab https://pittsburgh.craigslist.org/pts/5533430612.html

[LEEVON]

This one has been up for about a week:

https://springfield.craigslist.org/cto/5526912894.html

[DA68]

FYI - that one in Cleveland is rough. My buddy looked at it and said it was pitted and had signs of welding in a few areas. He is negotiable, but just wanted to give you a heads up.

[DA68]

I'll keep my suspension, you can have all cross members and frame rails to my long bed frame I have posted on here, for $200. It's a good, solid frame. Or you can have the whole thing for $350 - this weekend only.

[reb162]

DA68...thanks for the tip on that one in Cleveland. I had seen that one and been thinking about it. If finished right, I have nothing against prefinsihed frame, but at least when its unfinished I know what I'm getting (i.e. can see welds and pitting) and what has been done by me. I'll probably cross that one off the list.

Appreciate your offer on the longbed frame too, just not willing to cut and weld a long one yet.

The one in Springfield MO looks nice.....its a bit far but not too bad....maybe if I can deal on price.

That cab/frame in Pittsburgh would be nice if it was a real frame but it looks like its a custom frame set up for diesel. Cab looks rust free though.

[Clatterville trolley]

Originally Posted by reb162

Looking to buy a Short Bed Frame (coil spring) to replace my long bed frame which turned to rust dust.

I am really only looking for the frame including the engine cradle and all original cross members. I do not need all the other chassis and suspension, but will consider rolling chassis.

I'm planning to weld up my rusty cab, but would be open to cab / frame combos if the cab is rust free.

Willing to travel distance to pick up.

I have one bought that I will be getting sometime before mid-May, don't know how much of a hurry you are in. I purchased it from a picture, so not sure what I will find when I get it, but looks pretty good. It has a cab with it that appears to be pretty rust free - again pictures can be deceiving!
If you can wait that long I will send you pictures of it and we can decide where to go with it after that. I live in Columbia, MO which is almost dead center in the state. Thanks, Jay

[reb162]

Jay,
Sounds good. Let me know when you receive and what the condition of each is. I'm in no big rush as I'm out of country for work last week of April and first week of May so the timing may be just right.
-Bob

[Clatterville trolley]

Originally Posted by reb162

Jay,
Sounds good. Let me know when you receive and what the condition of each is. I'm in no big rush as I'm out of country for work last week of April and first week of May so the timing may be just right.
-Bob

I will certainly do that - Jay

[Clatterville trolley]

Originally Posted by reb162

Jay,
Sounds good. Let me know when you receive and what the condition of each is. I'm in no big rush as I'm out of country for work last week of April and first week of May so the timing may be just right.
-Bob

Bob - Finally got my camera rolling and got a couple of photos between rain storms - plan to get some more to post as well soon as I can. Last two of these photos were taken by the previous owner and aren't very clear, but figured they at least show the outside overall.

[Clatterville trolley]

Here are more photos, hot off the press!

[Clatterville trolley]

Still more:

[Todd68Chevy]

I have 2 bare frames on Shelburn, IN. One is a 67 frame with minimal rust above the rear suspension where they are double plated. $350 and the 2nd one is a 71-72 frame with no rust but needs work. Both front frame horns are bent up but I have a pair cut off of anther frame that I will include and the very rear cross member is damaged but I have one out of another frame that I will also include. $250 picked up in Shelburn, IN. Approx. 20 miles south of Terre Haute/ I70 exit #7.

[reb162]

Todd, both are SWB frames with coil suspension? I'm probably not interested in the 71 due to the damage and extra work to repair it...if I'm getting a new frame, I prefer to start with a straight one with no welding.

On the 67 frame, can you get me photos of the area with rust above the rear suspension so I can see how bad it is. I plan to get what ever I get blasted, but I don't want it so bad that after blasting that there are pinholes everywhere...that's why I had to get rid of my long bed frame.

Only other question I have (maybe you know), is what is involved to get a 67 frame to accommodate Power Steering. My understanding is they do not have a dimple in the frame by the steering gear but you can use a hammer to dent it in?

[csbatey]

Originally Posted by reb162

Todd, both are SWB frames with coil suspension? I'm probably not interested in the 71 due to the damage and extra work to repair it...if I'm getting a new frame, I prefer to start with a straight one with no welding.

On the 67 frame, can you get me photos of the area with rust above the rear suspension so I can see how bad it is. I plan to get what ever I get blasted, but I don't want it so bad that after blasting that there are pinholes everywhere...that's why I had to get rid of my long bed frame.

Only other question I have (maybe you know), is what is involved to get a 67 frame to accommodate Power Steering. My understanding is they do not have a dimple in the frame by the steering gear but you can use a hammer to dent it in?

I have 1 already media blasted. $225

[reb162]

csbatey, I sent you a PM.

-Bob

[Todd68Chevy]

Originally Posted by reb162

Todd, both are SWB frames with coil suspension? I'm probably not interested in the 71 due to the damage and extra work to repair it...if I'm getting a new frame, I prefer to start with a straight one with no welding.

On the 67 frame, can you get me photos of the area with rust above the rear suspension so I can see how bad it is. I plan to get what ever I get blasted, but I don't want it so bad that after blasting that there are pinholes everywhere...that's why I had to get rid of my long bed frame.

Only other question I have (maybe you know), is what is involved to get a 67 frame to accommodate Power Steering. My understanding is they do not have a dimple in the frame by the steering gear but you can use a hammer to dent it in?

Here are some pictures if you are still interested.

[reb162]

Thanks Todd, but I'm all set to purchase the frame from CSBatey. I am still interested in rust free cab if at the right price and location though so if you come across one you are willing to part with, let me know.

Jay, still would be interested in that cab if your willing to separate from the frame...depending on condition of course.

[Todd68Chevy]

Originally Posted by reb162

Thanks Todd, but I'm all set to purchase the frame from CSBatey. I am still interested in rust free cab if at the right price and location though so if you come across one you are willing to part with, let me know.

Jay, still would be interested in that cab if your willing to separate from the frame...depending on condition of course.

No problem, If it is clean above the axle area, I would buy it also.

[Clatterville trolley]

Originally Posted by reb162

Thanks Todd, but I'm all set to purchase the frame from CSBatey. I am still interested in rust free cab if at the right price and location though so if you come across one you are willing to part with, let me know.

Jay, still would be interested in that cab if your willing to separate from the frame...depending on condition of course.

Ok, I will let you know when I get it home and take pictures to post - it appears that I will probably try to get it May 5th or 6th if I can make connection with the person in Texas that is meeting me in Pryor, OK with it. Jay

[Steve Taylor]

I have a rolling short bed frame ,and a new complete bed. Want to sale together. I'm in southeast Ohio

[traut811]

Hello
I have a couple cabs I don't need if interested
http://stlouis.craigslist.org/pts/5519304694.html
http://stlouis.craigslist.org/pts/5503234830.html

I'd sell my rust free complete 68 sb chassis I buy another Schwartz performance chassis, but haven't decided on that one yet.

Thanks
Nick
I can text more pictures if needed

[Clatterville trolley]

Well, here are some more photos - not sure what it is with me and that blasted camera, I got these taken and when I went to take more it said it was needing to be charged. Only had used it a little bit since charging it up - and that was a brand new battery to boot - Oh well

[Clatterville trolley]

Some more: