|
|
|
05-05-2016, 02:06 PM
|
#1 |
|
Registered User
Join Date: Oct 2012
Location: pasco Wa
Posts: 10
|
71 c10 wheels
So i have a 71 c10 that is lowered 3/5 drop. I am looking at some 20x8.5 with 5.125bs and 20x9.5 with 5.75 bs and would like to put 255/40 up front and 295/40 out back. I am curious if they have the right backspacing and if anyone has any pics with this setup.
|
|
|
|
05-05-2016, 05:55 PM
|
#2 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: 71 c10 wheels
Quote:
Again, typical rear set-ups would be 20x10 w/5-5.5"bs or a 9.5" wheel @ 4.5-5"bs. That 5.75"bs for that rear size is excessive.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
05-05-2016, 06:49 PM
|
#3 |
|
Registered User
Join Date: Oct 2012
Location: pasco Wa
Posts: 10
|
Re: 71 c10 wheels
Thanks for the help. I was looking at the summit 143 wheels and that was the closest back spacing I could get to those numbers. Guess I will look for something different.
|
|
|
|
|
05-06-2016, 08:59 AM
|
#4 |
|
Registered User
Join Date: Jul 2012
Location: Central IL
Posts: 63
|
Re: 71 c10 wheels
I'm not sure you should really run a 295/40 series tire on a 9.5" rim either. I know it has been done, but if you look at tire specs, they want at least a 10" rim for the 295/40. Maybe the only problem would be higher tire wear in the center??
I've been facing the same challenge myself - I like some of the 20x9.5" wheels, but if I go that route, I'll have to run a 275/40 or 275/45 tire. |
|
|
|
|
05-06-2016, 09:29 AM
|
#5 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: 71 c10 wheels
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
05-06-2016, 03:49 PM
|
#6 |
|
Registered User
Join Date: Dec 2007
Location: Bay the Bay
Posts: 484
|
Re: 71 c10 wheels
I have 20x10 on my truck with 315/35/20
|
|
|
|
|
05-09-2016, 11:56 PM
|
#7 |
|
Registered User
Join Date: Aug 2010
Location: AZ
Posts: 3,069
|
Re: 71 c10 wheels
here is a 20x8.5 and 20x10 we did on my friends '68, using 255/40 and 315/35. Back still needs to come down a tad.
 
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
