![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
tire size
I want to put on a set of 17 inch wheels 17 x 8 , but I am having trouble deciding on what size of tire to go with,
I was thinking a 265/65-17 any ideas?
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Jun 2015
Location: Ephrata, WA
Posts: 308
|
Re: tire size
265 seems pretty wide for 8 inches.
http://www.tyresizecalculator.com/ty...dth-calculator I have 17 x 8 on the front, and 17 x 9 on the back. I went with 245's front 275's back.
__________________
68 C10 SSB 383 12 Charger 6.4L 12 Accord 3.5L (Wife's ride) 05 Ram 1500 5.7L My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=676545 |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: tire size
thanks man
I looked at the chart and i will probably do like you 8 on the front and maybe 10 on the back
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
|
Re: tire size
did you have to get a specific diameter for the center hub to clear
__________________
Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Jun 2015
Location: Ephrata, WA
Posts: 308
|
Re: tire size
I have aftermarket wheels and hubs. Wilwood brakes, so the hubs were smaller than stock.
__________________
68 C10 SSB 383 12 Charger 6.4L 12 Accord 3.5L (Wife's ride) 05 Ram 1500 5.7L My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=676545 |
![]() |
![]() |
![]() |
#6 |
The Niner
![]() Join Date: Nov 2010
Location: Broad Brook, CT
Posts: 2,494
|
Re: tire size
265's are plenty wide enough for 8" wide rims. I have 265/75/16 on 16 x 7 rims, they look fine.
__________________
"A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/ |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2016
Location: Saskatchewan
Posts: 357
|
Re: tire size
I wouldn't put anything less than a 295 on a 10" rim. 265 on an 8" rim will be quite fine, I run 285/35/18 rear and 255/35/18 front both on 18X9.5" the 255 is a touch to small for the 9.5" rim wish I would have went 275 front and 305 rear.
__________________
1972 C10 - It might be old, but it's not slow |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,721
|
Re: tire size
Tire size is a subjective matter. I think too wide a tire on the front of one of our trucks can ruin the look. Same with too short a tire. On my 69 short step I went with 235 55 17 in the front on an 8" zero offset rim and in the rear a 275 55 17 on a 9" zero offset rim. 27" tall in the front and 29" in the rear.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
![]() |
![]() |
![]() |
Bookmarks |
|
|