Torn Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Throttle Works · 06-28-2016, 03:00 PM

We would like to introduce project "TORN".

This project started as a conversation about another truck we had for sale on ebay. After a couple of hours on the phone we decided it would be best to start from scratch and build one from ground up.

With the ultimate goal of competing in the OUSCI in Las Vegas after SEMA, we demand many things from TORN.

Built on a custom frame with C5 running gear, powered by a single turbo 5.7 LS Built by Thompson Motorsports in Texas, controlled by Haltech

Current suppliers are - Throttle Works - MHT wheels - QA1 shocks - Nitto Tires - Kendall oils - Thompson Motorsports - Benny Maxwell at Axsent (concept drawings, logos, design)

Here is a link to the project page.
http://www.throttleworks.com/projects/65?page=1

**youngrodder** · 06-28-2016, 10:23 PM

Very cool and different build. It would be nice to see an AD auto crossed. There are a couple C10 I see on the tracks but no AD's.

Following along.

Marc

mr48chev · 06-28-2016, 10:51 PM

I'm not normally a fan of theme trucks but that is one good looking truck that just sits right and looks right. I think it looks great because you didn't go overboard on the military theme. The insignia and color do a great job by themselves without any more embellishment and the rest of the paint job adds to the total look.

OrrieG · 06-29-2016, 02:03 AM

A few years ago there was a thread on this site from a guy that set an Ad up for autocross that ran really good. http://67-72chevytrucks.com/vboard/s...=535417&page=2

ChuckDriver · 06-29-2016, 07:27 PM

That's a great looking AD, hope you post the full build here!

Throttle Works · 06-29-2016, 11:57 PM

A couple early pics.

SalvagedSouls · 06-30-2016, 08:52 AM

I'll tag along as well.
-Jonathan-

**oldman3** · 06-30-2016, 09:00 AM

Looking forward to the build...Jim

solidaxel · 06-30-2016, 10:32 AM

I like new builds

mr48chev · 06-30-2016, 11:25 AM

I just went back and went though the build page. You guys do some serious design and build work. I'd say that one should give the current hot dogs running the Goodguys autocross all they can handle.

Throttle Works · 06-30-2016, 12:29 PM

Here are a couple of the original drawings put together by Benny https://axesent.wordpress.com/

Name: collage.jpg
Views: 761
Size: 32.3 KB

Name: garage car.jpg
Views: 754
Size: 29.1 KB

Name: Side with vette.jpg
Views: 763
Size: 35.2 KB

CATMdude45 · 06-30-2016, 09:32 PM

Being a 25 year veteran of the Air Force, I love the truck!

Throttle Works · 07-01-2016, 11:28 AM

The heart of TORN. Thanks to Thompson Motorsports for putting together a fantastic motor for us. http://www.thompsonmotorsports.net/

Name: IMG_20160602_142119655.jpg
Views: 701
Size: 97.9 KB

Name: IMG_20160602_142119655.jpg
Views: 701
Size: 97.9 KB

Throttle Works · 07-01-2016, 11:31 AM

Sorry forgot the specs.
5.7 Iron block LS
Running on E85/98
Engine dyno numbers are north of 800hp - will require traction control.
We may run methanol injection in order to keep intake temps in check on the road course.... No intercooler.

mr48chev · 07-01-2016, 07:36 PM

Tell Benny that I tip my hat to his skills as an artist because I actually thought the first drawing you showed was an artsy fartsy photo rather than a drawing. That man has some skill.

Throttle Works · 07-05-2016, 09:53 AM

TORN up on the frame jig. The C5 suspension install is fairly straight forward, wheelbase will be set to a match the concept drawing as close as possible. Custom bedsides will be fabricated in order to match the wheelbase. The C5 with it's transmission in the rear will aid in traction out of the corners. QA1 shocks will also add to keeping speeds up in and out of the corners.

Name: 20150929_174801.jpg
Views: 621
Size: 98.5 KB

Name: 20150929_174801.jpg
Views: 621
Size: 98.5 KB

Name: 20151005_092624.jpg
Views: 617
Size: 90.3 KB

Name: first_photo (2).jpg
Views: 618
Size: 69.4 KB

whitedog76 · 07-05-2016, 10:58 AM

Love the build. I've been looking into building my 54 into a Bonneville racer.

Do you have any more pics of your rollcage? Especially the rear hoop and floor attachment points?

Chris

mr48chev · 07-05-2016, 01:45 PM

Quote:

Originally Posted by whitedog76

Love the build. I've been looking into building my 54 into a Bonneville racer.

Do you have any more pics of your rollcage? Especially the rear hoop and floor attachment points?

Chris

I don't want to sidetrack his thread but if you plan to build a rig to race at Bonneville the first thing to do is buy a copy of the rule book and study it.

I looked into it years ago and there aren't/weren't many classes that pickups fit in well. Do a lot of homework before you start building.

whitedog76 · 07-05-2016, 05:20 PM

Quote:

Originally Posted by mr48chev

I don't want to sidetrack his thread but if you plan to build a rig to race at Bonneville the first thing to do is buy a copy of the rule book and study it.

I looked into it years ago and there aren't/weren't many classes that pickups fit in well. Do a lot of homework before you start building.

I've actually been studying it. I don't have any pipe dreams of going 200 MPH. One of the lower classes suits me just fine.

I've scrapped my original plans of building off the original chassis and am doing a chassis swap. Which is why this particular thread caught my eye.

Throttle Works · 07-06-2016, 10:27 AM

Whitedog76,
Here are a couple pics, don't have a clear one of the base of the rollcage, I will try to get some this afternoon.

We built the perimeter frame with 2x3 tube which moves the cage connection points to the outside as far as possible and also eases mounting of the cab.

Name: first_photo (3).jpg
Views: 511
Size: 77.5 KB

Name: first_photo (3).jpg
Views: 511
Size: 77.5 KB

Name: first_photo (5).jpg
Views: 532
Size: 76.6 KB

Name: IMG_7891.jpg
Views: 539
Size: 46.4 KB

Name: IMG_7894.jpg
Views: 542
Size: 28.5 KB

Name: IMG_7895.jpg
Views: 536
Size: 49.5 KB

Throttle Works · 07-05-2016, 03:27 PM

Quote:

Originally Posted by whitedog76

Love the build. I've been looking into building my 54 into a Bonneville racer.

Do you have any more pics of your rollcage? Especially the rear hoop and floor attachment points?

Chris

Chris, I will get a couple pics posted soon.

whitedog76 · 07-06-2016, 09:27 PM

Awesome. I really like how it's coming together. I'm planning on using a Trailblazer chassis vs. an S 10. The center part of the frame has a huge drop in it. Doing a perimeter frame similar to yours may be the way to go.

Thanks
Chris

**mongocanfly** · 07-06-2016, 09:51 PM

Whitedog you may want to pull a tape on a trailblazer before you commit to it..I think it may be a little wide for an ad truck..I can't remember who but there's a trailblazer swap on here somewhere and that's the issues he ran into..

whitedog76 · 07-07-2016, 08:57 AM

Quote:

Originally Posted by mongocanfly

Whitedog you may want to pull a tape on a trailblazer before you commit to it..I think it may be a little wide for an ad truck..I can't remember who but there's a trailblazer swap on here somewhere and that's the issues he ran into..

Don't want to take over this thread. I've had aTB for a daily driver since 2005. Owned my 54 since 2006. Trust me I've thought about it ALOT.

Check out this link. http://www.vortec4200.com/forum1/vie...php?f=10&t=939

Throttle Works · 07-07-2016, 11:53 AM

Whitedog76,

Cool, I have read that thread in the past. We do Atlas swaps in Landcruisers what a great motor. The 5 cylinder is our motor of choice though, it fits better in the Cruiser and has far better economy.

Name: 13632693_10209570827338259_1744653153_o.jpg
Views: 312
Size: 55.1 KB

Name: 13632693_10209570827338259_1744653153_o.jpg
Views: 312
Size: 55.1 KB

Name: 13582459_10209570769176805_602780285_o.jpg
Views: 316
Size: 45.5 KB

Name: 13579746_10209570827298258_844078795_o.jpg
Views: 312
Size: 51.2 KB

06-28-2016, 03:00 PM	#1
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Torn Project We would like to introduce project "TORN". This project started as a conversation about another truck we had for sale on ebay. After a couple of hours on the phone we decided it would be best to start from scratch and build one from ground up. With the ultimate goal of competing in the OUSCI in Las Vegas after SEMA, we demand many things from TORN. Built on a custom frame with C5 running gear, powered by a single turbo 5.7 LS Built by Thompson Motorsports in Texas, controlled by Haltech Current suppliers are - Throttle Works - MHT wheels - QA1 shocks - Nitto Tires - Kendall oils - Thompson Motorsports - Benny Maxwell at Axsent (concept drawings, logos, design) Here is a link to the project page. http://www.throttleworks.com/projects/65?page=1

06-28-2016, 10:23 PM	#2
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,765	Re: Torn Project Very cool and different build. It would be nice to see an AD auto crossed. There are a couple C10 I see on the tracks but no AD's. Following along. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

06-28-2016, 10:51 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,405	Re: Torn Project I'm not normally a fan of theme trucks but that is one good looking truck that just sits right and looks right. I think it looks great because you didn't go overboard on the military theme. The insignia and color do a great job by themselves without any more embellishment and the rest of the paint job adds to the total look. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-29-2016, 02:03 AM	#4
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Torn Project A few years ago there was a thread on this site from a guy that set an Ad up for autocross that ran really good. http://67-72chevytrucks.com/vboard/s...=535417&page=2 __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

06-29-2016, 07:27 PM	#5
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,622	Re: Torn Project That's a great looking AD, hope you post the full build here! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

06-29-2016, 11:57 PM	#6
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Re: Torn Project A couple early pics.

06-30-2016, 08:52 AM	#7
SalvagedSouls Registered User Join Date: Sep 2015 Location: Pendleton,IN Posts: 82	Re: Torn Project I'll tag along as well. -Jonathan- __________________ 1949 - 3600 Update suspension, engine and drive it. http://67-72chevytrucks.com/vboard/s...d.php?t=691034 1953 - 3100 1955.1 - 3100 Bare Metal Build http://67-72chevytrucks.com/vboard/s...d.php?t=691261 1965 - Buick Special & 1965 Buick Skylark

06-30-2016, 09:00 AM	#8
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Torn Project Looking forward to the build...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-30-2016, 10:32 AM	#9
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Torn Project I like new builds __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

06-30-2016, 11:25 AM	#10
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,405	Re: Torn Project I just went back and went though the build page. You guys do some serious design and build work. I'd say that one should give the current hot dogs running the Goodguys autocross all they can handle. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-30-2016, 12:29 PM	#11
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Re: Torn Project Here are a couple of the original drawings put together by Benny https://axesent.wordpress.com/

06-30-2016, 09:32 PM	#12
CATMdude45 Registered User Join Date: Mar 2016 Location: Ukon, ID Posts: 36	Re: Torn Project Being a 25 year veteran of the Air Force, I love the truck! __________________ 52 Chevy 3100 AD 68 Ford Bronco 06 Dodge 2500 Ram Cummins Diesel

07-01-2016, 11:28 AM	#13
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Re: Torn Project The heart of TORN. Thanks to Thompson Motorsports for putting together a fantastic motor for us. http://www.thompsonmotorsports.net/

07-01-2016, 11:31 AM	#14
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Re: Torn Project Sorry forgot the specs. 5.7 Iron block LS Running on E85/98 Engine dyno numbers are north of 800hp - will require traction control. We may run methanol injection in order to keep intake temps in check on the road course.... No intercooler.

07-01-2016, 07:36 PM	#15
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,405	Re: Torn Project Tell Benny that I tip my hat to his skills as an artist because I actually thought the first drawing you showed was an artsy fartsy photo rather than a drawing. That man has some skill. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

07-05-2016, 09:53 AM	#16
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Re: Torn Project TORN up on the frame jig. The C5 suspension install is fairly straight forward, wheelbase will be set to a match the concept drawing as close as possible. Custom bedsides will be fabricated in order to match the wheelbase. The C5 with it's transmission in the rear will aid in traction out of the corners. QA1 shocks will also add to keeping speeds up in and out of the corners.

07-05-2016, 10:58 AM	#17
whitedog76 Registered User Join Date: Jan 2014 Location: Peoria, IL Posts: 1,450	Re: Torn Project Love the build. I've been looking into building my 54 into a Bonneville racer. Do you have any more pics of your rollcage? Especially the rear hoop and floor attachment points? Chris

07-06-2016, 10:27 AM	#20
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Re: Torn Project Whitedog76, Here are a couple pics, don't have a clear one of the base of the rollcage, I will try to get some this afternoon. We built the perimeter frame with 2x3 tube which moves the cage connection points to the outside as far as possible and also eases mounting of the cab.

07-06-2016, 09:27 PM	#22
whitedog76 Registered User Join Date: Jan 2014 Location: Peoria, IL Posts: 1,450	Re: Torn Project Awesome. I really like how it's coming together. I'm planning on using a Trailblazer chassis vs. an S 10. The center part of the frame has a huge drop in it. Doing a perimeter frame similar to yours may be the way to go. Thanks Chris

07-06-2016, 09:51 PM	#23
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,614	Re: Torn Project Whitedog you may want to pull a tape on a trailblazer before you commit to it..I think it may be a little wide for an ad truck..I can't remember who but there's a trailblazer swap on here somewhere and that's the issues he ran into..

07-07-2016, 11:53 AM	#25
Throttle Works Registered User Join Date: Jun 2016 Location: Eagle Posts: 18	Re: Torn Project Whitedog76, Cool, I have read that thread in the past. We do Atlas swaps in Landcruisers what a great motor. The 5 cylinder is our motor of choice though, it fits better in the Cruiser and has far better economy.

Register or Log In To remove these advertisements.