What Is The Difference Between Glovebox Liners? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69sixpackbee · 10-02-2003, 05:20 PM

...What is the difference between the liners from an A/C truck and a non-A/C one?
I have to modify one to work with my new A/C unit. I got the Airtique unit today and it is going to need considerable modification to install. It will look good but it goes all the way across the length of the passenger compt. area under the dash and the hoses will run right into the stock glovebox. I knew this going in so I am not surprised. I will just cut and reshape the cardboard liner until I get it to comply!
Is there a big diff. in the shape of the two? Anyone have any pics?
Thanx!

*rickspickuppart* · 10-02-2003, 05:31 PM

the only difference is the left side of the box is notched to clear where the factory a/c hoses attach, if you need one that is about 3 inches shallower (from front to back) I have plastic ones I sell (I would have to check the price on them) and they have all the spots marked to make the holes for the mounting screws.

69sixpackbee · 10-02-2003, 05:34 PM

Rick,
I have a plastic one now that came with my Old Air A/C setup. I cannot use it any more since this Airtique unit is considerably different than the Old Air was. I figure it will be easier to "hack" up an aftermarket cardboard one than have to mess with an already considerably smaller plastic one. What do you get for the cardboard ones?

*rickspickuppart* · 10-02-2003, 05:36 PM

they are 10.00 (w/ the hardware) and the plastic ones I have are the same kind you have

sactoC10 · 10-02-2003, 11:17 PM

Anyone know where I can see a pic of a plastic one? I've only seen the cardbord ones amd mine recently fell apart. I need something...(w/AC notch).

10-02-2003, 05:20 PM	#1
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	What Is The Difference Between Glovebox Liners? ...What is the difference between the liners from an A/C truck and a non-A/C one? I have to modify one to work with my new A/C unit. I got the Airtique unit today and it is going to need considerable modification to install. It will look good but it goes all the way across the length of the passenger compt. area under the dash and the hoses will run right into the stock glovebox. I knew this going in so I am not surprised. I will just cut and reshape the cardboard liner until I get it to comply! Is there a big diff. in the shape of the two? Anyone have any pics? Thanx!

10-02-2003, 05:31 PM	#2
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	the only difference is the left side of the box is notched to clear where the factory a/c hoses attach, if you need one that is about 3 inches shallower (from front to back) I have plastic ones I sell (I would have to check the price on them) and they have all the spots marked to make the holes for the mounting screws.

10-02-2003, 05:34 PM	#3
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Rick, I have a plastic one now that came with my Old Air A/C setup. I cannot use it any more since this Airtique unit is considerably different than the Old Air was. I figure it will be easier to "hack" up an aftermarket cardboard one than have to mess with an already considerably smaller plastic one. What do you get for the cardboard ones?

10-02-2003, 05:36 PM	#4
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	they are 10.00 (w/ the hardware) and the plastic ones I have are the same kind you have

10-02-2003, 11:17 PM	#5
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,056	Anyone know where I can see a pic of a plastic one? I've only seen the cardbord ones amd mine recently fell apart. I need something...(w/AC notch).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.