Wheel Help

[michael23v]

I need to find some wheels and tires to put on my 67 c10 quickly. These are just going to be "hold me overs" so I am not looking to spend a ton, but i dont want to get anything less than 8" wide. I am in the Orange County, CA area. Any places you guys know of to get something soon and relatively cheap?

[ck5566]

Originally Posted by michael23v

I need to find some wheels and tires to put on my 67 c10 quickly. These are just going to be "hold me overs" so I am not looking to spend a ton, but i dont want to get anything less than 8" wide. I am in the Orange County, CA area. Any places you guys know of to get something soon and relatively cheap?

Don't know about that statement "cheap" but you can seek on this sites member CheyenneShortstep, last time i was over to his House he did have a set (4) 8" wide steelies don't remember if they were 5 or 6 bolt holes. Tell him I sent you to him. me ck5566. hope this helps

[michael23v]

Originally Posted by ck5566

Don't know about that statement "cheap" but you can seek on this sites member CheyenneShortstep, last time i was over to his House he did have a set (4) 8" wide steelies don't remember if they were 5 or 6 bolt holes. Tell him I sent you to him. me ck5566. hope this helps

Cheap is the wrong word. Inexpensive would have been a better choice. Thank your for the help i sent a pm

[Ugly 61]

A set of 15 x 7 or 15 x8 6 bolt ralleys off of a later 1/2 to 4x4 will work well look sharp and likely be as available as anything
Ugly 61