1969 Chevy c-10 Seat Hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MMiller1050** · 07-15-2016, 09:54 PM

I am rebuilding my bench seat out of a 1969 Chevy c-10. I have everything but the two very small springs that help the seat sliders lock back ointo position after adjusting. Not the long one that goes to the handle, but the small one that goes around the locking pin. I have attached a picture I found on the Internet with the springs in place.

Does anyone know where to get this spring? I need them both.

**Grumpy old man** · 07-15-2016, 10:05 PM

Ace hardware .

Gromit · 07-16-2016, 12:54 AM

Couple more photos of your missing spring - sorry one is blurry..

If I remember right I had a lot of trouble figuring out how these springs came on and off.. and maybe I never did figure it out..

And yes Ace Hardware.

**MMiller1050** · 07-18-2016, 05:46 PM

Well...went to Ace hardware and all they had was a box of assorted springs. None will fit. Thank you for the person that suggested ACE. I might try another ACE store, and see if they have other options. But, does anyone know were to actually get this little seat pin spring. I am going to LMC truck...they don't show it in their catalog, but maybe they have them anyway.

Thank You,
Michael Miller

**Grumpy old man** · 07-18-2016, 05:51 PM

Your welcome , it's a seat track spring I've used the ones from Ace before there not a nos exact part but the springs they carry will work ,improvise

**leddzepp** · 07-18-2016, 09:45 PM

If you are near a junkyard they were used on square body seats for several years as well

**MMiller1050** · 07-18-2016, 09:57 PM

Thanks for the replies. But, I think I found a place that has them. Bill's truck shop in Canada. I am calling tomorrow to see it they has some. Website says he has the springs, bars and the little clips. We will see.

Thank You all,
Michael Miller

07-15-2016, 09:54 PM	#1
MMiller1050 Junior Member Join Date: Jun 2016 Location: Shelbyville, TN Posts: 56	1969 Chevy c-10 Seat Hardware I am rebuilding my bench seat out of a 1969 Chevy c-10. I have everything but the two very small springs that help the seat sliders lock back ointo position after adjusting. Not the long one that goes to the handle, but the small one that goes around the locking pin. I have attached a picture I found on the Internet with the springs in place. Does anyone know where to get this spring? I need them both. Attached Images

07-15-2016, 10:05 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 1969 Chevy c-10 Seat Hardware Ace hardware . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

07-16-2016, 12:54 AM	#3
Gromit Registered User Join Date: Jul 2015 Location: Central Coast, CA Posts: 501	Re: 1969 Chevy c-10 Seat Hardware Couple more photos of your missing spring - sorry one is blurry.. If I remember right I had a lot of trouble figuring out how these springs came on and off.. and maybe I never did figure it out.. And yes Ace Hardware. Attached Images

07-18-2016, 05:46 PM	#4
MMiller1050 Junior Member Join Date: Jun 2016 Location: Shelbyville, TN Posts: 56	Re: 1969 Chevy c-10 Seat Hardware Well...went to Ace hardware and all they had was a box of assorted springs. None will fit. Thank you for the person that suggested ACE. I might try another ACE store, and see if they have other options. But, does anyone know were to actually get this little seat pin spring. I am going to LMC truck...they don't show it in their catalog, but maybe they have them anyway. Thank You, Michael Miller Last edited by MMiller1050; 07-18-2016 at 05:58 PM.

07-18-2016, 05:51 PM	#5
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 1969 Chevy c-10 Seat Hardware Your welcome , it's a seat track spring I've used the ones from Ace before there not a nos exact part but the springs they carry will work ,improvise __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

07-18-2016, 09:45 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,022	Re: 1969 Chevy c-10 Seat Hardware If you are near a junkyard they were used on square body seats for several years as well __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

07-18-2016, 09:57 PM	#7
MMiller1050 Junior Member Join Date: Jun 2016 Location: Shelbyville, TN Posts: 56	Re: 1969 Chevy c-10 Seat Hardware Thanks for the replies. But, I think I found a place that has them. Bill's truck shop in Canada. I am calling tomorrow to see it they has some. Website says he has the springs, bars and the little clips. We will see. Thank You all, Michael Miller



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.