Threads Stripped on Quadrajet Inlet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WorkinLonghorn** · 07-20-2016, 10:01 AM

Hi, I need to get my truck back working ASAP but I noticed a fuel leak at the carb where the fuel filter chamber threads into the carb body. On inspection I see that the threads are stripped and can not be used again.
Short of buying a used Q-Jet at the yard, is there a fix that will hold up? Much Thanks, Brian

LONGHORN1962 · 07-20-2016, 10:18 AM

Most auto supply stores will carry a oversized self threading inlet nut. Just don't put a filter back in there, you will trash the threads on the carb.

midniteblues · 07-20-2016, 10:20 AM

I haven't seen one in a while but they make/made a oversized( thinkin self threading)fuel inlet for quads just for this purpose.

Perhaps they are in the "help" section in the stores.

**WorkinLonghorn** · 07-20-2016, 10:23 AM

WOW, Great news! Thanks Midnight and LH192. Checking it out now. Brian

Well, as soon as anybody is open around here.

geezer#99 · 07-20-2016, 10:45 AM

If your local parts store counter guy gives you the 'deer caught in the headlights look', you can get one here.
http://quadrajetparts.com/quadrajet-...-c-128_27.html

midniteblues · 07-20-2016, 10:52 AM

No problem, that's why we are here too help and get help

LONGHORN1962 · 07-20-2016, 10:58 AM

no problem at all

**WorkinLonghorn** · 07-20-2016, 12:45 PM

Quote:

Originally Posted by geezer#99

If your local parts store counter guy gives you the 'deer caught in the headlights look', you can get one here.
http://quadrajetparts.com/quadrajet-...-c-128_27.html

Thanks Geezer, It looks like I will be ordering this and taking a little vacation because nobody local has it ( I'm in a little village called LOS ANGELES.

trac209 · 07-20-2016, 02:34 PM

Depending how stripped I've used jb weld and it's worked. Just do not run a filter in carb.

**WorkinLonghorn** · 07-20-2016, 03:31 PM

Thanks Trac209, I thought of that but it's really stripped and it wobbles back and forth pretty bad when "tight". I'm going with the self tapping repair part.

Now after screwing around with it I had a stuck float needle and had to take the top off. Now I am missing one of the four little brass needles that hangs off of the top and I was having a bear of a time getting all those needles to go into their holes. It sucks getting old? I used to do this type of repair on the side of the road in a few minutes and be on my way. Now parts go missing and one problem leads to another and to another, then the gasket disappears. Time to drink my lunch , it's in the 90s out there. Brian out.

07-20-2016, 10:01 AM	#1
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Threads Stripped on Quadrajet Inlet Hi, I need to get my truck back working ASAP but I noticed a fuel leak at the carb where the fuel filter chamber threads into the carb body. On inspection I see that the threads are stripped and can not be used again. Short of buying a used Q-Jet at the yard, is there a fix that will hold up? Much Thanks, Brian __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.

07-20-2016, 10:18 AM	#2
LONGHORN1962 Registered User Join Date: Apr 2015 Location: Weatherford Oklahoma Posts: 53	Re: Threads Stripped on Quadrajet Inlet Most auto supply stores will carry a oversized self threading inlet nut. Just don't put a filter back in there, you will trash the threads on the carb.

07-20-2016, 10:20 AM	#3
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Threads Stripped on Quadrajet Inlet I haven't seen one in a while but they make/made a oversized( thinkin self threading)fuel inlet for quads just for this purpose. Perhaps they are in the "help" section in the stores. __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

07-20-2016, 10:23 AM	#4
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Re: Threads Stripped on Quadrajet Inlet WOW, Great news! Thanks Midnight and LH192. Checking it out now. Brian Well, as soon as anybody is open around here. __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.

07-20-2016, 10:45 AM	#5
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,731	Re: Threads Stripped on Quadrajet Inlet If your local parts store counter guy gives you the 'deer caught in the headlights look', you can get one here. http://quadrajetparts.com/quadrajet-...-c-128_27.html

07-20-2016, 10:52 AM	#6
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Threads Stripped on Quadrajet Inlet No problem, that's why we are here too help and get help __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

07-20-2016, 10:58 AM	#7
LONGHORN1962 Registered User Join Date: Apr 2015 Location: Weatherford Oklahoma Posts: 53	Re: Threads Stripped on Quadrajet Inlet no problem at all

07-20-2016, 02:34 PM	#9
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: Threads Stripped on Quadrajet Inlet Depending how stripped I've used jb weld and it's worked. Just do not run a filter in carb.

07-20-2016, 03:31 PM	#10
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Re: Threads Stripped on Quadrajet Inlet Thanks Trac209, I thought of that but it's really stripped and it wobbles back and forth pretty bad when "tight". I'm going with the self tapping repair part. Now after screwing around with it I had a stuck float needle and had to take the top off. Now I am missing one of the four little brass needles that hangs off of the top and I was having a bear of a time getting all those needles to go into their holes. It sucks getting old? I used to do this type of repair on the side of the road in a few minutes and be on my way. Now parts go missing and one problem leads to another and to another, then the gasket disappears. Time to drink my lunch , it's in the 90s out there. Brian out. __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. Last edited by WorkinLonghorn; 07-20-2016 at 03:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.