Size of holes for Cab and Rad Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

canadian_diesel1964 · 07-24-2016, 05:41 PM

I need to fab up the tops of the mounts for the Rad (x2) and Cab (x4) due to rust and the holes being worn larger...I wondered if anyone has their frame exposed if the could tell me the proper size of the holes and how far they are from the outer side of the truck on centre please..Thank you!!

**aerotruk63** · 07-24-2016, 07:37 PM

Around 13/16 for the rad support. Unfortunately the other side is a bad home made mount, therefore I can't give you an accurate center to center measurement.

canadian_diesel1964 · 07-24-2016, 07:58 PM

Thank you that's a great start

**aerotruk63** · 07-24-2016, 10:55 PM

For some reason the picture didn't stay in my last post. So if this happens again the front cab supports are 1.34 diameter and are slotted 1.68. The center to center measurement is 40.83".
Rear mounts are 1.04 diameter not slotted and are 42.16" center to center.
These measurements are for 63-66.

aggie91 · 07-27-2016, 05:21 PM

Quote:

Originally Posted by aerotruk63

For some reason the picture didn't stay in my last post. So if this happens again the front cab supports are 1.34 diameter and are slotted 1.68. The center to center measurement is 40.83".
Rear mounts are 1.04 diameter not slotted and are 42.16" center to center.
These measurements are for 63-66.

Note that on the drawing, ONLY the passenger side cab mount is slotted. The driver side mount is a 1.34" ROUND hole.

canadian_diesel1964 · 07-25-2016, 06:10 AM

right on man mine is a 63...just one question are the slotted front to back or side to side?

**aerotruk63** · 07-25-2016, 06:43 AM

side to side.

canadian_diesel1964 · 07-26-2016, 01:11 PM

thank you!!

07-24-2016, 05:41 PM	#1
canadian_diesel1964 Registered User Join Date: Feb 2015 Location: Belmont Ontario Canada Posts: 418	Size of holes for Cab and Rad Mounts I need to fab up the tops of the mounts for the Rad (x2) and Cab (x4) due to rust and the holes being worn larger...I wondered if anyone has their frame exposed if the could tell me the proper size of the holes and how far they are from the outer side of the truck on centre please..Thank you!!

07-24-2016, 07:37 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Size of holes for Cab and Rad Mounts Around 13/16 for the rad support. Unfortunately the other side is a bad home made mount, therefore I can't give you an accurate center to center measurement. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-24-2016, 07:58 PM	#3
canadian_diesel1964 Registered User Join Date: Feb 2015 Location: Belmont Ontario Canada Posts: 418	Re: Size of holes for Cab and Rad Mounts Thank you that's a great start

07-24-2016, 10:55 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Size of holes for Cab and Rad Mounts For some reason the picture didn't stay in my last post. So if this happens again the front cab supports are 1.34 diameter and are slotted 1.68. The center to center measurement is 40.83". Rear mounts are 1.04 diameter not slotted and are 42.16" center to center. These measurements are for 63-66. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 07-24-2016 at 11:02 PM.

07-25-2016, 06:10 AM	#6
canadian_diesel1964 Registered User Join Date: Feb 2015 Location: Belmont Ontario Canada Posts: 418	Re: Size of holes for Cab and Rad Mounts right on man mine is a 63...just one question are the slotted front to back or side to side?

07-25-2016, 06:43 AM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Size of holes for Cab and Rad Mounts side to side. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-26-2016, 01:11 PM	#8
canadian_diesel1964 Registered User Join Date: Feb 2015 Location: Belmont Ontario Canada Posts: 418	Re: Size of holes for Cab and Rad Mounts thank you!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.