CA 2.5 Ram Horn Manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kenfuzed · 08-08-2016, 12:31 AM

I have a nice set of 2-1/2" Ram Horns. I only started my new engine once with these before realizing the collector clearance was going to be too tight with my forward engine placement. They will work on any small block chevy as long as you have not moved the engine forward by 3.5" like I did, and in the stock engine position these dump in the perfect spot on a C10.

These are the solid cast iron manifolds for use with a 2.5" collector, as opposed to the cheap imports or those 2.25" versions that have been bored out. I don't have the actual picture but they look identical the ones below. Asking 125 plus the ride, or pick up in Glendora CA.

66 Burban · 08-09-2016, 10:59 PM

Are these GM manifolds or aftermarket??

Kenfuzed · 08-10-2016, 06:31 PM

Non GM, but not the cheap flimsy ones on ebay (been there done that already). These have the identical collector outlets on both sides so no worries about having to fit a different right or left style connections like stock.

Kenfuzed · 08-16-2016, 01:24 AM

Price drop $115 plus the ride.

08-08-2016, 12:31 AM	#1
Kenfuzed Registered User Join Date: Jun 2014 Location: Glendora CA -> Tampa FL Posts: 587	2.5 Ram Horn Manifolds I have a nice set of 2-1/2" Ram Horns. I only started my new engine once with these before realizing the collector clearance was going to be too tight with my forward engine placement. They will work on any small block chevy as long as you have not moved the engine forward by 3.5" like I did, and in the stock engine position these dump in the perfect spot on a C10. These are the solid cast iron manifolds for use with a 2.5" collector, as opposed to the cheap imports or those 2.25" versions that have been bored out. I don't have the actual picture but they look identical the ones below. Asking 125 plus the ride, or pick up in Glendora CA. Attached Images __________________ 1966 C10 Short Fleetside 1988 Sportster, 2008 Street Glide Ken's 1966 C10 build "Red Ale" Follow on Instgram: @cv_performance https://instagram.com/cv_performance Harley Performance Parts: CV Performance (Harley related) Enjoying the ride!

08-09-2016, 10:59 PM	#2
66 Burban Registered User Join Date: Aug 2011 Location: Green Valley,AZ Posts: 527	Re: 2.5 Ram Horn Manifolds Are these GM manifolds or aftermarket?? __________________ Remember: "When seconds count, the Police are only minutes away". Thx, Billy B.

08-10-2016, 06:31 PM	#3
Kenfuzed Registered User Join Date: Jun 2014 Location: Glendora CA -> Tampa FL Posts: 587	Re: 2.5 Ram Horn Manifolds Non GM, but not the cheap flimsy ones on ebay (been there done that already). These have the identical collector outlets on both sides so no worries about having to fit a different right or left style connections like stock. __________________ 1966 C10 Short Fleetside 1988 Sportster, 2008 Street Glide Ken's 1966 C10 build "Red Ale" Follow on Instgram: @cv_performance https://instagram.com/cv_performance Harley Performance Parts: CV Performance (Harley related) Enjoying the ride!

08-16-2016, 01:24 AM	#4
Kenfuzed Registered User Join Date: Jun 2014 Location: Glendora CA -> Tampa FL Posts: 587	Re: 2.5 Ram Horn Manifolds Price drop $115 plus the ride. __________________ 1966 C10 Short Fleetside 1988 Sportster, 2008 Street Glide Ken's 1966 C10 build "Red Ale" Follow on Instgram: @cv_performance https://instagram.com/cv_performance Harley Performance Parts: CV Performance (Harley related) Enjoying the ride!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.