NM WTB: AC Evaporator Box Whole or Part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 08-27-2016, 05:34 PM

Chasing an AC evaporator intact with solid metal inner parts or would consider just the inside metal panel if that is solid. Just discovered mine has metal too far gone to reuse. Dang mice helped to ruin this one.

**DeadheadNM** · 08-27-2016, 05:36 PM

Was one large midden inside and out.

**Ironhorse** · 08-27-2016, 05:40 PM

Think I still have the evaporator box from a '70 3/4 I've been parting. Will be tomorrow before I can get to it to know for sure. Not sure what sort of condition the metal is in. Will get back to you.

**DeadheadNM** · 08-27-2016, 05:40 PM

Quote:

Originally Posted by Ironhorse

Think I still have the evaporator box from a '70 3/4 I've been parting. Will be tomorrow before I can get to it to know for sure. Not sure what sort of condition the metal is in. Will get back to you.

Please do. Thank you.

**w314speed** · 08-27-2016, 07:57 PM

Pete- I will look at one I got out of Las Vegas for one of my projects. Best I remember it was very nice. I have a broken water pipe so I will get the NOS items and hopefully post everything in the AM, before I grow a shovel to my hands! That is ugly to think about! Thanks, Dan

**w314speed** · 08-28-2016, 10:12 AM

I had three evaporator cases, but two of them look like what you have. Here are pics of the evaporator case set-up that I got out of NV. It is all the parts minus the compressor brackets. I didn't picture the condenser or compressor, but they are part of the deal. What you see is minor surface rust. I can't split this up. I would need $300 plus shipping for all or what you want sent. LMK! Thanks, Dan

**DeadheadNM** · 08-28-2016, 10:41 AM

PM sent thanks Dan

**Ironhorse** · 08-28-2016, 12:00 PM

I'm out on this Pete. Looked at the evaporator case and the engine side portion has a hole poked thru it. Most likely when an engine was pulled since it is where the vac cannister mounts. The metal plate backer seems decent with surface rust but the case would need to be repaired. I'm pretty sure it would be hard to repair and not show the repair afterwards.

**PICKMUP** · 08-28-2016, 12:07 PM

I am sure I have saved one that is almost perfect. I will pull it out of storage today and post pics. Frank

**PICKMUP** · 08-28-2016, 09:24 PM

I checked the three sets and all of them are rusted inside...sorry.

**DeadheadNM** · 08-28-2016, 10:17 PM

Thanks for looking guys - I appreciate the help

**w314speed** · 08-29-2016, 10:07 AM

Pics of damaged area!

**1968C30** · 08-29-2016, 11:47 AM

I have this one. The metal is solid. The inside cover is damaged as shown.

**DeadheadNM** · 08-29-2016, 12:16 PM

Quote:

Originally Posted by w314speed

Pics of damaged area!

Bummer - thanks for the pic. Will have to pass on the AC equip but on board for the rest.

Quote:

Originally Posted by 1968C30

I have this one. The metal is solid. The inside cover is damaged as shown.

My inside cover is solid. What do you need for the box less the evaporator and blower motor (to save ship expense) shipped to 87107? If blower motor fan is good I could use that too. Mice nibbled mine (plastic). Thanks. Pete

**1968C30** · 08-29-2016, 06:32 PM

PM sent.

08-27-2016, 05:34 PM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,356	WTB: AC Evaporator Box Whole or Part Chasing an AC evaporator intact with solid metal inner parts or would consider just the inside metal panel if that is solid. Just discovered mine has metal too far gone to reuse. Dang mice helped to ruin this one. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-27-2016, 05:36 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,356	Re: WTB: AC Evaporator Box Whole or Part Was one large midden inside and out. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-27-2016, 05:40 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,154	Re: WTB: AC Evaporator Box Whole or Part Think I still have the evaporator box from a '70 3/4 I've been parting. Will be tomorrow before I can get to it to know for sure. Not sure what sort of condition the metal is in. Will get back to you. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-27-2016, 07:57 PM	#5
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: WTB: AC Evaporator Box Whole or Part Pete- I will look at one I got out of Las Vegas for one of my projects. Best I remember it was very nice. I have a broken water pipe so I will get the NOS items and hopefully post everything in the AM, before I grow a shovel to my hands! That is ugly to think about! Thanks, Dan

08-28-2016, 10:12 AM	#6
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: WTB: AC Evaporator Box Whole or Part I had three evaporator cases, but two of them look like what you have. Here are pics of the evaporator case set-up that I got out of NV. It is all the parts minus the compressor brackets. I didn't picture the condenser or compressor, but they are part of the deal. What you see is minor surface rust. I can't split this up. I would need $300 plus shipping for all or what you want sent. LMK! Thanks, Dan Attached Images

08-28-2016, 10:41 AM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,356	Re: WTB: AC Evaporator Box Whole or Part PM sent thanks Dan __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-28-2016, 12:00 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,154	Re: WTB: AC Evaporator Box Whole or Part I'm out on this Pete. Looked at the evaporator case and the engine side portion has a hole poked thru it. Most likely when an engine was pulled since it is where the vac cannister mounts. The metal plate backer seems decent with surface rust but the case would need to be repaired. I'm pretty sure it would be hard to repair and not show the repair afterwards. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-28-2016, 12:07 PM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: WTB: AC Evaporator Box Whole or Part I am sure I have saved one that is almost perfect. I will pull it out of storage today and post pics. Frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-28-2016, 09:24 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: WTB: AC Evaporator Box Whole or Part I checked the three sets and all of them are rusted inside...sorry. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-28-2016, 10:17 PM	#11
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,356	Re: WTB: AC Evaporator Box Whole or Part Thanks for looking guys - I appreciate the help __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-29-2016, 10:07 AM	#12
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: WTB: AC Evaporator Box Whole or Part Pics of damaged area! Attached Images

08-29-2016, 11:47 AM	#13
1968C30 Senior Member Join Date: Jan 2012 Location: Mt Nebo WV Posts: 1,335	Re: WTB: AC Evaporator Box Whole or Part I have this one. The metal is solid. The inside cover is damaged as shown. Attached Images

08-29-2016, 06:32 PM	#15
1968C30 Senior Member Join Date: Jan 2012 Location: Mt Nebo WV Posts: 1,335	Re: WTB: AC Evaporator Box Whole or Part PM sent.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.