Schematic for courtesy lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

custom10nut · 09-28-2016, 08:48 PM

Does anybody out there have a simple schematic for a set of under dash curtesy lights, that work off the door switch? I used to have one but can't find it

**dmjlambert** · 09-28-2016, 09:31 PM

A google of the subject you ask for shows a surprising lack of good info. Or if it is out there, it is difficult to find. So, I am not surprised you ask. I don't yet have courtesy lights, but I will be getting some soon. Here is something: http://www.painlessperformance.com/Manuals/30708.pdf

The basic idea is: the door jamb switches when the door is opened (or the headlight switch when it is twisted all the way to the left) connect one terminal of the dome light to ground. The other terminal of the light is always connected to 12V. So connect one terminal of each courtesy light to the same 12V source where the dome light is connected. Connect the other terminal of each courtesy light to a door jamb switch.

**Already Gone** · 09-28-2016, 11:04 PM

Hope this helps. The first link is the post from Roger Koop and the under dash light wiring he sells. I used this on my truck and it was plug and play. The second link is a thread I started trying to figure out where to mount the wiring.

I can post pics of the lights installed tomorrow as the puics are on my home computer.

http://67-72chevytrucks.com/vboard/s...d.php?t=618187

http://67-72chevytrucks.com/vboard/s...d.php?t=714329

**dmjlambert** · 09-28-2016, 11:35 PM

That is an interesting kit. It would be nice to see where exactly that plugs in, and a photo of that connection.

**Already Gone** · 09-28-2016, 11:42 PM

Quote:

Originally Posted by dmjlambert

That is an interesting kit. It would be nice to see where exactly that plugs in, and a photo of that connection.

I will do that tomorrow. If you have the factory door jamb light switches its piece of cake.

Andy4639 · 09-29-2016, 03:15 AM

Hot to fuse panel that is hot all the time are tie into back of cig lighter same thing. Ground wire to door switches. That simple enough!

custom10nut · 09-29-2016, 10:15 AM

This is great. Thanks to all. Now I can get my lights installed. I've only had them in a box for about 20 years.

custom10nut · 09-29-2016, 11:32 AM

This is great. Thanks to all. Now I can get my lights installed. I've only had them in a box for about 20 years.

**Already Gone** · 09-29-2016, 07:24 PM

[ATTACH]White Wire from Door Jamb Switch[/ATTACH]

[ATTACH]White Jamb Switch Wire into Connector[/ATTACH]

[ATTACH]Connector to Dome Light[/ATTACH]

[ATTACH]Connector from new Harness[/ATTACH]

Just unplug the connector the door jamb wire is going to and plug in the new harness connector and then your under dash and dome light will come on at the same time.

**dmjlambert** · 09-29-2016, 08:34 PM

That looks like a lot of wires and connectors, considering how they are going to just 2 extra lights. I will need to build up the nerve to get that going in my truck. I need to look around under my dash to see how my door jamb switch wires are routed. The connectors that allow you to just plug into the existing harness are pretty nifty. Thanks for posting those pictures.

**Already Gone** · 09-29-2016, 09:39 PM

Quote:

Originally Posted by dmjlambert

That looks like a lot of wires and connectors, considering how they are going to just 2 extra lights. I will need to build up the nerve to get that going in my truck. I need to look around under my dash to see how my door jamb switch wires are routed. The connectors that allow you to just plug into the existing harness are pretty nifty. Thanks for posting those pictures.

If your truck has the original door jamb switch and the wiring hasn't been altered you will figure where to plug in and out within 5 minutes.

09-28-2016, 08:48 PM	#1
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,882	Schematic for courtesy lights Does anybody out there have a simple schematic for a set of under dash curtesy lights, that work off the door switch? I used to have one but can't find it

09-28-2016, 09:31 PM	#2
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,814	Re: Schematic for courtesy lights A google of the subject you ask for shows a surprising lack of good info. Or if it is out there, it is difficult to find. So, I am not surprised you ask. I don't yet have courtesy lights, but I will be getting some soon. Here is something: http://www.painlessperformance.com/Manuals/30708.pdf The basic idea is: the door jamb switches when the door is opened (or the headlight switch when it is twisted all the way to the left) connect one terminal of the dome light to ground. The other terminal of the light is always connected to 12V. So connect one terminal of each courtesy light to the same 12V source where the dome light is connected. Connect the other terminal of each courtesy light to a door jamb switch.

09-28-2016, 11:04 PM	#3
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: Schematic for courtesy lights Hope this helps. The first link is the post from Roger Koop and the under dash light wiring he sells. I used this on my truck and it was plug and play. The second link is a thread I started trying to figure out where to mount the wiring. I can post pics of the lights installed tomorrow as the puics are on my home computer. http://67-72chevytrucks.com/vboard/s...d.php?t=618187 http://67-72chevytrucks.com/vboard/s...d.php?t=714329 __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

09-28-2016, 11:35 PM	#4
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,814	Re: Schematic for courtesy lights That is an interesting kit. It would be nice to see where exactly that plugs in, and a photo of that connection.

09-29-2016, 03:15 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Schematic for courtesy lights Hot to fuse panel that is hot all the time are tie into back of cig lighter same thing. Ground wire to door switches. That simple enough! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-29-2016, 10:15 AM	#7
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,882	Re: Schematic for courtesy lights This is great. Thanks to all. Now I can get my lights installed. I've only had them in a box for about 20 years.

09-29-2016, 11:32 AM	#8
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,882	Re: Schematic for courtesy lights This is great. Thanks to all. Now I can get my lights installed. I've only had them in a box for about 20 years.

09-29-2016, 07:24 PM	#9
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: Schematic for courtesy lights [ATTACH]White Wire from Door Jamb Switch[/ATTACH] [ATTACH]White Jamb Switch Wire into Connector[/ATTACH] [ATTACH]Connector to Dome Light[/ATTACH] [ATTACH]Connector from new Harness[/ATTACH] Just unplug the connector the door jamb wire is going to and plug in the new harness connector and then your under dash and dome light will come on at the same time. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

09-29-2016, 08:34 PM	#10
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,814	Re: Schematic for courtesy lights That looks like a lot of wires and connectors, considering how they are going to just 2 extra lights. I will need to build up the nerve to get that going in my truck. I need to look around under my dash to see how my door jamb switch wires are routed. The connectors that allow you to just plug into the existing harness are pretty nifty. Thanks for posting those pictures.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.