New Product from AccuAir! Tank w/ Valves Inside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pro Performance · 10-03-2016, 10:00 AM

We wanted to share a new product that AccuAir has released. Some of you have seen this already, but wanted to give some info for those who haven't. They are releasing a 5 gallon 200 PSI, DOT approved tank with the valve inside! This makes for a very clean install. Also will include built-in flow controls. The 5 gallon tank will have a 4-corner valve system (2-corner in each end cap). The 3 gallon will have a 2-corner valve system, so the running a pair, will create the 4-corner system you want.

Because we are a direct authorized dealer for AccuAir, we were able to pre-order these new tanks, and will be the first to get them. We still have some left from our pre-order for sale, so make sure to contact us to get one sooner from this pre-order.

Available in raw, black, gray or bronze finish.
$749 for raw finish, with valves inside.
(Compared to $630 when ordering separate valve and tank)

Call us, PM or email us for forum pricing.
sales@azproperformance.com
480-420-8175

**Hart_Rod** · 10-03-2016, 10:47 AM

That's slick! Where does the computer mount?

Pro Performance · 10-03-2016, 02:31 PM

When using E-level or Switchspeed, it can mount to the tank using the optional Endo mounts, or wherever you would like to.

Pro Performance · 10-21-2016, 01:29 AM

These tanks are getting closer to being released! We still have a few left over from our pre-order.

bjkttr · 12-04-2016, 01:22 PM

I think I want one. Are there any downside to going this route? How much for the speed switch or E-Level

Pro Performance · 12-05-2016, 01:35 PM

I don't see any downside to going this route, other than the $119 difference of doing a regular 5 gallon tank and separate VU4 valve. It does clean up the system and make things more simplistic.

PM Sent for pricing.

kvn1011 · 01-05-2017, 07:40 PM

question
I have the Vu4 manifold
and wonder if I were to buy the Endo-T
if i could later add the compressor only??

kvn1011 · 01-05-2017, 07:42 PM

and im wondering if there is a way to mount that Vu4 into the Endo-T

Pro Performance · 01-06-2017, 03:36 PM

Quote:

Originally Posted by kvn1011

question
I have the Vu4 manifold
and wonder if I were to buy the Endo-T
if i could later add the compressor only??

Quote:

Originally Posted by kvn1011

and im wondering if there is a way to mount that Vu4 into the Endo-T

Yes, all the Endo tanks are modular. When the compressor option becomes available, you can add it inside any Endo tank.

We have the Endo-T tanks in stock.

10-03-2016, 10:00 AM	#1
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	New Product from AccuAir! Tank w/ Valves Inside We wanted to share a new product that AccuAir has released. Some of you have seen this already, but wanted to give some info for those who haven't. They are releasing a 5 gallon 200 PSI, DOT approved tank with the valve inside! This makes for a very clean install. Also will include built-in flow controls. The 5 gallon tank will have a 4-corner valve system (2-corner in each end cap). The 3 gallon will have a 2-corner valve system, so the running a pair, will create the 4-corner system you want. Because we are a direct authorized dealer for AccuAir, we were able to pre-order these new tanks, and will be the first to get them. We still have some left from our pre-order for sale, so make sure to contact us to get one sooner from this pre-order. Available in raw, black, gray or bronze finish. $749 for raw finish, with valves inside. (Compared to $630 when ordering separate valve and tank) Call us, PM or email us for forum pricing. sales@azproperformance.com 480-420-8175

10-03-2016, 10:47 AM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: New Product from AccuAir! Tank w/ Valves Inside That's slick! Where does the computer mount? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-03-2016, 02:31 PM	#3
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: New Product from AccuAir! Tank w/ Valves Inside When using E-level or Switchspeed, it can mount to the tank using the optional Endo mounts, or wherever you would like to.

10-21-2016, 01:29 AM	#4
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: New Product from AccuAir! Tank w/ Valves Inside These tanks are getting closer to being released! We still have a few left over from our pre-order.

12-04-2016, 01:22 PM	#5
bjkttr Registered User Join Date: Dec 2014 Location: greenville Posts: 53	Re: New Product from AccuAir! Tank w/ Valves Inside I think I want one. Are there any downside to going this route? How much for the speed switch or E-Level

12-05-2016, 01:35 PM	#6
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: New Product from AccuAir! Tank w/ Valves Inside I don't see any downside to going this route, other than the $119 difference of doing a regular 5 gallon tank and separate VU4 valve. It does clean up the system and make things more simplistic. PM Sent for pricing.

01-05-2017, 07:40 PM	#7
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: New Product from AccuAir! Tank w/ Valves Inside question I have the Vu4 manifold and wonder if I were to buy the Endo-T if i could later add the compressor only?? __________________ My Build Thead (Project Slow Motion)

01-05-2017, 07:42 PM	#8
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: New Product from AccuAir! Tank w/ Valves Inside and im wondering if there is a way to mount that Vu4 into the Endo-T __________________ My Build Thead (Project Slow Motion)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.