Inner and outer quarter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tomo** · 10-31-2016, 08:52 AM

Might be a random question but I'm at work thinking about my blazer and this thought popped in my head. For the guys that did not remove/replace the inner and outer quarters on their blazers: What is the best way to media blast or strip between the 2 panels and paint it properly? It just doesn't seem like there is enough room to get in there.

69-72 · 10-31-2016, 09:07 AM

It is usually in decent condition in there rust wise. Best you can do is blast as much as you can then shoot some undercoating as best as you can. It was bare steel from the factory so anything you do will be better.

10-31-2016, 08:52 AM	#1
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 213	Inner and outer quarter Might be a random question but I'm at work thinking about my blazer and this thought popped in my head. For the guys that did not remove/replace the inner and outer quarters on their blazers: What is the best way to media blast or strip between the 2 panels and paint it properly? It just doesn't seem like there is enough room to get in there. Last edited by Tomo; 10-31-2016 at 08:58 AM.

10-31-2016, 09:07 AM	#2
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: Inner and outer quarter It is usually in decent condition in there rust wise. Best you can do is blast as much as you can then shoot some undercoating as best as you can. It was bare steel from the factory so anything you do will be better. __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.