|
|
|
11-07-2016, 03:20 PM
|
#1 |
|
Registered User
Join Date: Sep 2016
Location: Cornelius, NC
Posts: 8
|
Window Flange Rust
So I took the rear window out of my 72 (large rear window) and the metal flange that the the gasket goes over is in pretty rough shape. There is a pretty good size spot right above the gasket on the cab that had about 3/8" of bondo covering a dent. Well the water was leaking into the gasket from the dent and has done a number on the metal flange. Does anyone have any tips for repairing this (both inside and outer pieces of the flange need to be repaired/replaced)?
|
|
|
|
11-07-2016, 03:26 PM
|
#2 | ||||
|
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,930
|
Re: Window Flange Rust
Sounds like it needs to be cut out and a new one welded in from a donor truck as there is no patch panel made for this.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Quote:
Quote:
|
||||
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
