The Doc & Kim 69 build

[zicc1835]

I need to start this build thread before i get to far into this.....I bought this Truck this past May met Abe (Doc) & his wife Kim great people flew out to Michigan Doc picked me up from Detroit Metro. We spent a day and a half putting her back on a frame for a 12 hour fun ride back to Jersey haven't done much until now. I sold the LWBFS bed in August and bought at TriPlus SWBFS bed from ABS up in Conn.I bought a 350 out of a 70 Burb with 65000k on it and a 700r4 i will use one of the open 373 rears i have and eventually will try to trade to something more highway. before this week i have just been collecting parts. I want to be able to cruise at a top speed of 80-85 @ low rpms. I'm going to insulate this cab and and keep it quite with some cooool climate control and toned down flow masters. I want to make a nice quite cruiser out of this truck and have fun driving her.Abe was going to build her for his wife but some issues got in his way and he made the decision to let this truck begin a new life with me.It has a great paint job on it was an Arizona truck so little to no rust on her Just a tad down by the kick on drivers side. I only hope i can match the color on the bed when i am ready to paint. I had previously purchased a SWB frame for another project but came buy this deal and want to make it a short bed. So come along for the ride if you want . My plan is to strip an get the frame presentable over the winter.drop the drive train in by spring and see if i can get her on the road by mid or late summer that may be a aggressive goal cause i still have a full time job and travel a lot. I can't / won't post any more pics until i figure out how to get them rotated

[zicc1835]

me on the left with Doc

[zicc1835]

SWB frame for Doc&Kim

[zicc1835]

put the pics back on the desktop is working again just a PITA ....forum staff please get this fixed !

next step RIVETS RIVETS and MORE RIVETS

[sduckworth13]

Very cool. Looking forward to seeing your progress.

[zicc1835]

Originally Posted by sduckworth13

Very cool. Looking forward to seeing your progress.

thanks Scott i learned a lot from the 72 ..I'm going to take my time on this one and start from the ground up nuts & bolts........its gonna be fun

[zicc1835]

got the frame up on the engine stands rotisserie today and finished getting all the rivets out of the top on both sides pulled the steering box and some of the E brake hardware ...tomorrow I'm going to flip it when my son gets here to help me and start the rivet process on the bottom I plan on stripping the frame rails complete separate and take to the sand blaster ill see how much work it will be to soothe out any scaling and them there rust dimples at that point will see about powder coat or POR-15

[GR8-68]

Looks like it will be a great project

[zicc1835]

Originally Posted by GR8-68

Looks like it will be a great project

thanks Larry I'm having lots of fun with this one i have the painted doors hood fenders wrapped & stashed all over in places my wife has not discovered yet ....its gonna be funny when she finds them ........

[zicc1835]

thanks Larry ,got more rivets out today 2 cross members out including the trailing arm CM

[zicc1835]

getting closer to the end game on these rivets ...I set the EC trail arm member in to hold the rails together until I'm ready to separate and sand blast

[RRR18]

Watchin this.

[zicc1835]

well all rivets removed last one about 930 tonight .. rails are stripped left those C members bolted in to keep her together to load ...i called the blaster today he said bring it. I will load it tomorrow morning....so i should have it back Friday or Saturday

[zicc1835]

from the engine stands to the trailer loaded easy ....and off to the blaster this morning your thoughts on pricing on these? i thought 250. is a little steep even for NJ ill have them back tomorrow. comments welcome

[zicc1835]

rails blasted and ready for some prep I'm waiting on a quote to P coat them

[zicc1835]

got at the cab today took the doors off getting ready to deal with some surface rust and some repair on the kick on the drivers side got the doors wrapped up for safe keeping fenders too

[Dustmaker65]

Looks like a great project! Coming right along too.

As for pricing, our blaster is our powder coater too. He charges $1k for a chassis whether it is broke down like yours, or completely together.

[zicc1835]

Originally Posted by Dustmaker65

Looks like a great project! Coming right along too.

As for pricing, our blaster is our powder coater too. He charges $1k for a chassis whether it is broke down like yours, or completely together.

thanks Dustmaker
least i have some idea I'm waiting on a quote now from P Coat guy I asked him if he could get rid of the dimples left from scaling he seemed to have the process down will see what the $$$s will be my other option is for me to do the Epoxy and high build and epoxy ..... myself stay tuned

[zicc1835]

one of my stashes ......

[GR8-68]

250 is what I was quoted here in NC to have my frame blasted, I did my own sand blasting. I disassembled my while frame also but blasted the whole thing then took apart and spot blasted where the cross members were located.

[zicc1835]

Thanks Larry
I'm feeling better now I about what I paid for the blast I used to Sand blast my own stuff ......all be it 20 - 30 years ago I'm going to take him the front cross member will see what that will be ...see I think he would have been 250 for the frame complete ???? Then I would have spot blasted
Jess

[zicc1835]

took her up to my friends shop today for some TLC he's going to help with a floor patch ....and ....

[zicc1835]

with the rails

[zicc1835]

santa came early shock relocater and trans c-members haven't done anything on the rails maybe this weekend ill get epoxy on them

[zicc1835]

finally got some time to work on the frame rails and brackets epoxy primer on gonna see if i can steel another day before xmas for high build