Vibration at high speeds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tdangle · 11-27-2016, 12:06 AM

I've got a slight vibration at higher speeds 65+ After having the front end looked, tires inspected and balanced, I started looking into phasing of the 2 piece driveshaft. I just checked it and it is out of phase. I measured the angle of the caps on the rear yoke and the front yoke and yes it is out by about 13 degrees. My understanding is 3 degrees is max. My dad apparently never put it back correctly after changing out u-joints.

To be corrected tomorrow. Has anyone else had this problem?

11-27-2016, 12:06 AM	#1
tdangle Registered User Join Date: Mar 2005 Location: Jurupa Valley, Ca Posts: 1,210	Vibration at high speeds I've got a slight vibration at higher speeds 65+ After having the front end looked, tires inspected and balanced, I started looking into phasing of the 2 piece driveshaft. I just checked it and it is out of phase. I measured the angle of the caps on the rear yoke and the front yoke and yes it is out by about 13 degrees. My understanding is 3 degrees is max. My dad apparently never put it back correctly after changing out u-joints. To be corrected tomorrow. Has anyone else had this problem? __________________ Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.