TKO 600 and Low Hump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AcampoDave · 01-04-2017, 09:06 PM

I wonder does the tko600 fit a low hump floor? I did a lot of searching, but just didn't get a good answer. I have a '66 and the floor is low and one solid piece. The cab was originally from an automatic truck. As of now tho' I have an aging Saginaw 4 speed. It's mated to a stock cast iron bell that came with the '63 manual tranny frame I used when I assembled the truck. I'm just kinda weighing my options here as I would like to stay with a stick.

oliver63 · 01-04-2017, 09:33 PM

I have a TKO 500 in my 63...it didnt fit with the low hump.

Quote:

Originally Posted by AcampoDave

I wonder does the tko600 fit a low hump floor? I did a lot of searching, but just didn't get a good answer. I have a '66 and the floor is low and one solid piece. The cab was originally from an automatic truck. As of now tho' I have an aging Saginaw 4 speed. It's mated to a stock cast iron bell that came with the '63 manual tranny frame I used when I assembled the truck. I'm just kinda weighing my options here as I would like to stay with a stick.

AcampoDave · 01-05-2017, 11:14 AM

Thanks, if a 500 doesn't fit a low hump, odds are that the 600 won't either.

chevy_mike · 01-05-2017, 11:21 AM

Externally the 500 and 600 are the same size. It's internal ratios and a couple parts that changes the torque rating (500 ft. lbs or 600 ft. lbs input torque).

**PORKY** · 01-05-2017, 07:54 PM

Take a look here
http://67-72chevytrucks.com/vboard/s...d.php?t=704714
Good luck!

AcampoDave · 01-05-2017, 08:45 PM

Quote:

Originally Posted by PORKY

Take a look here
http://67-72chevytrucks.com/vboard/s...d.php?t=704714
Good luck!

Nice! So your carpet still fit after the nip and tuck to the tunnel? That would be concern of mine too having a non removable hump and all.

**PORKY** · 01-05-2017, 09:27 PM

I haven't got there yet. The days just fly by.
I think I'm going to fabricate a small spacer and cover it with matching red leather like the seat. It'll only be about 1-1/2" high. Then I will screw the boot to that. The carpet will be under the spacer. I may make it into a cup holder/console. If you have any good ideas, please pass them along.

01-04-2017, 09:06 PM	#1
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,775	TKO 600 and Low Hump I wonder does the tko600 fit a low hump floor? I did a lot of searching, but just didn't get a good answer. I have a '66 and the floor is low and one solid piece. The cab was originally from an automatic truck. As of now tho' I have an aging Saginaw 4 speed. It's mated to a stock cast iron bell that came with the '63 manual tranny frame I used when I assembled the truck. I'm just kinda weighing my options here as I would like to stay with a stick.

01-05-2017, 11:14 AM	#3
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,775	Re: TKO 600 and Low Hump Thanks, if a 500 doesn't fit a low hump, odds are that the 600 won't either.

01-05-2017, 11:21 AM	#4
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: TKO 600 and Low Hump Externally the 500 and 600 are the same size. It's internal ratios and a couple parts that changes the torque rating (500 ft. lbs or 600 ft. lbs input torque). __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-05-2017, 07:54 PM	#5
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: TKO 600 and Low Hump Take a look here http://67-72chevytrucks.com/vboard/s...d.php?t=704714 Good luck!

01-05-2017, 09:27 PM	#7
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: TKO 600 and Low Hump I haven't got there yet. The days just fly by. I think I'm going to fabricate a small spacer and cover it with matching red leather like the seat. It'll only be about 1-1/2" high. Then I will screw the boot to that. The carpet will be under the spacer. I may make it into a cup holder/console. If you have any good ideas, please pass them along.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.