Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-08-2017, 11:43 AM | #1 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Bed Tailight section cuts available
I see people posting for these cuts...I have beds that I can get 2 driver side and 1 passenger side. I have the other passenger side too but it's marginal, depends on what you need it for as the lower 1/2 is better than the upper.
I would prefer to keep the light housings from those unless you really need them. I can cut those for $100 each plus shipping, you have to figure $40 or so for shipping a single because they are quite large. Shipping a pair would be more cost effective. I think $100 on that cut is cheap considering how many sparks I have to eat while making the cut, then I have to find a box, etc.... BTW, what are you going to do with the cuts? |
01-21-2017, 07:59 PM | #2 |
Registered User
Join Date: Dec 2016
Location: Pa
Posts: 86
|
Re: Bed Tailight section cuts available
Are you selling other sections from these bedsides or have you already scrapped them?
|
01-21-2017, 08:14 PM | #3 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
|
01-21-2017, 08:41 PM | #4 |
Registered User
Join Date: Dec 2016
Location: Pa
Posts: 86
|
Re: Bed Tailight section cuts available
On a 8' bed, I need the flange where the bedside meets the floor. I would need the flange and then about 4" up on the inner bed side. I would need from the front of the bed to the wheel well. I need this for the passenger side if you have one that is not rusted.
|
01-21-2017, 09:31 PM | #5 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
It looks clean, I rubbed it and its just surface rust, shouldn't be pitted...$100 shipped
|
01-21-2017, 10:51 PM | #6 |
Registered User
Join Date: Dec 2016
Location: Pa
Posts: 86
|
Re: Bed Tailight section cuts available
If the front corner and the portion that is under the wheel well are solid, I will take it. Can you include the part of it that wraps around the front of the bed? If you can cut it a little above the body line that is formed into it, that would work.
|
01-22-2017, 12:03 AM | #7 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
None of the seams are bulging so I think it should be fine the wheel well and the corner. Yes I will include the front where it wraps around and to be safe I will cut it an inch or so above the body line. I am busy next weekend but I can cut it out the following weekend. I wont cut it until its paid for since recently I cut a bunch of parts off and they never got paid for....
|
01-22-2017, 10:15 AM | #8 |
Senior Member
Join Date: Mar 2012
Location: Royston, Ga
Posts: 625
|
Re: Bed Tailight section cuts available
Happen to be selling a tool box opening yet from a bedside?
__________________
Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim. |
01-22-2017, 11:05 PM | #9 | |
Registered User
Join Date: Dec 2016
Location: Pa
Posts: 86
|
Re: Bed Tailight section cuts available
Quote:
|
|
01-24-2017, 12:03 AM | #10 | |
Registered User
Join Date: Dec 2016
Location: Pa
Posts: 86
|
Re: Bed Tailight section cuts available
Quote:
Thanks Andy |
|
01-22-2017, 11:05 AM | #11 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
I do have a tool box opening. The bottom has been filled with body filler so I don't know the actual condition of the metal. Would a picture of the back side help you decide if you could use it?
|
01-22-2017, 11:10 AM | #12 | |
Senior Member
Join Date: Mar 2012
Location: Royston, Ga
Posts: 625
|
Re: Bed Tailight section cuts available
Quote:
Thanks
__________________
Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim. |
|
01-23-2017, 12:48 PM | #13 |
Senior Member
Join Date: Mar 2012
Location: Royston, Ga
Posts: 625
|
Re: Bed Tailight section cuts available
Were you able to get any pics?
__________________
Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim. |
01-23-2017, 12:52 PM | #14 |
Senior Member
Join Date: Mar 2012
Location: Royston, Ga
Posts: 625
|
Re: Bed Tailight section cuts available
Sorry didn't see that you weren't going to be back til Wednesday.
Thanks
__________________
Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim. |
01-23-2017, 11:27 AM | #15 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Bed Tailight section cuts available
Can you do these cuts & if so how much to 59911? Repairing damage from bumper strike. Thanks
|
01-23-2017, 12:16 PM | #16 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
I have those, and will do $90 shipped to you. I can get you a picture of them on Wednesday. I'm out of town for work until then
|
01-27-2017, 12:51 AM | #17 |
Registered User
Join Date: Jan 2008
Location: Red Lodge Montana
Posts: 240
|
Re: Bed Tailight section cuts available
I need a right side bed side cut. Do you still have it?
Thanks |
01-27-2017, 01:16 AM | #18 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
|
01-27-2017, 01:22 PM | #19 |
Senior Member
Join Date: Mar 2012
Location: Royston, Ga
Posts: 625
|
Re: Bed Tailight section cuts available
Were you able to get any pics of the toolbox opening?
__________________
Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim. |
02-12-2017, 10:58 PM | #20 |
Registered User
Join Date: Feb 2016
Location: Columbia TN
Posts: 145
|
Did you ever sell the green tail light sections in the original post?? If not I want um
Posted via Mobile Device |
02-20-2019, 03:48 PM | #21 |
landarts
Join Date: May 2005
Location: Star, Idaho
Posts: 1,375
|
Re: Bed Tailight section cuts available
Is there any section of bed floor available? Need section to repair this.
__________________
Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer |
08-30-2019, 12:13 AM | #22 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: Bed Tailight section cuts available
Sorry it was this post I was asking about the section
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
08-30-2019, 12:19 AM | #23 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
I have a red and white one posted someplace, my posts are hard to find because inpost too often.....
|
08-30-2019, 01:57 AM | #24 |
Account Suspended
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Bed Tailight section cuts available
I have other bed cuts from 2 complete beds, no left side tail light cuts available but i do have 3 rh i think, floor sections too depending on size.
|
08-30-2019, 02:01 PM | #25 |
Registered User
Join Date: Oct 2009
Location: Fort Lauderdale, FL
Posts: 70
|
Re: Bed Tailight section cuts available
Ok please let me know if you come across anything
__________________
1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver |
Bookmarks |
|
|