Grille trim questions.

[84lngbed]

What are some ways to remove the orginal vinyl tape off the middle grille trim? What color have people use on the Chevy emblem in the center of the grille?

[TKCR]

Originally Posted by 84lngbed

What are some ways to remove the orginal vinyl tape off the middle grille trim? What color have people use on the Chevy emblem in the center of the grille?

I have done a few of these. I soak them in Goof Off Pro Stripper, usually over night. Most of the tape will come right off. Then you'll just have to get the little bit of leftover glue. Use chrome polish, and they are as good as new. Here's a few I have done.
Now with mine, I retapped it red to match the truck.

[TKCR]

For the Bow tie, I have done one Red. And then I restored several, as close to the original gold as I could.

[84lngbed]

Originally Posted by TKCR

I have done a few of these. I soak them in Goof Off Pro Stripper, usually over night. Most of the tape will come right off. Then you'll just have to get the little bit of leftover glue. Use chrome polish, and they are as good as new. Here's a few I have done.
Now with mine, I retapped it red to match the truck.

Thanks. That's look amazing. You know the width of the tape.

[TKCR]

Originally Posted by 84lngbed

Thanks. That's look amazing. You know the width of the tape.

It came in a roll, I had to cut it to size for the molding. I just measured it and then used a straight edge and cut it with a very sharp razor.

[TKCR]

This the stuff I used, the smallest roll is 12".

http://www.rvinyl.com/Color-Vinyl-Wraps?Attribs=1070

[Danmcg]

Thanks for the link TKCR

[84lngbed]

Originally Posted by TKCR

I have done a few of these. I soak them in Goof Off Pro Stripper, usually over night. Most of the tape will come right off. Then you'll just have to get the little bit of leftover glue. Use chrome polish, and they are as good as new. Here's a few I have done.
Now with mine, I retapped it red to match the truck.

What did you use to clean the chrome before you put the vinyl? Any tips on putting the vinyl on.

[TKCR]

Originally Posted by 84lngbed

What did you use to clean the chrome before you put the vinyl? Any tips on putting the vinyl on.

I polished them with Brasso and then the center I wiped it with alcohol before installing the tape.
Just be patient. There are some how to videos on youtube. I watched a few before trying it. And it took a few try before getting it perfect.

[TKCR]

Here's some videos:

https://www.youtube.com/results?search_query=rvinyl

[84lngbed]

Originally Posted by TKCR

I polished them with Brasso and then the center I wiped it with alcohol before installing the tape.
Just be patient. There are some how to videos on youtube. I watched a few before trying it. And it took a few try before getting it perfect.

Forgot to post how mine turned out.


Here what I use to cut my vinyl. Already set up if I have time to do my spare grille.

[TKCR]

Originally Posted by 84lngbed

Forgot to post how mine turned out.


Here what I use to cut my vinyl. Already set up if I have time to do my spare grille.

WOW!!! That turned out awesome. Did you have any issues? And where did you get that cutter from? I could have used something like that on mine.

[84lngbed]

Thanks. I got a sheet of the black vinyl from the site you listed.

[travlinman]

I just walked by 2 trucks in my local junkyard that had the full set of trim and bow tie on them but the plastic grolls were broken. Also found a set of trim laying inside of a cab.
Didn't find anything I was looking for lol

[TKCR]

Originally Posted by travlinman

I just walked by 2 trucks in my local junkyard that had the full set of trim and bow tie on them but the plastic grolls were broken. Also found a set of trim laying inside of a cab.
Didn't find anything I was looking for lol

Wish I could get them!!