MO 250 cu. in. I6 parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clatterville trolley** · 03-13-2017, 10:22 PM

I pulled the six cylinder engine out of a 1967 parts truck I had to make it easier to remove the cab for another project. I had always wondered if it was reusable or not, so I disassembled it.
Block was cracked in two or three places. Therefore, I decided to offer up some of the good parts to help out anyone rebuilding one of these.

The list of parts:

Crankshaft - looks good haven't put a mic to it, but everything shiny with no galling or hot spots, etc. $50 plus ride
Exhaust manifold with free moving heat riser. $40 plus ride
Intake manifold with heat tube, carb., linkage. $55 plus ride
May also have an air cleaner if it is correct one - you identify $35 plus ride
Clutch cover tins (had 3 spd. trans.) $20 plus ride
Flywheel with good starter ring - no buggered up teeth. $30 plus ride
Clutch housing for standard shift trans. $45 plus ride
Clutch throw out arm. $15 plus ride
Harmonic balancer. $20 plus ride
**SOLD**Extra belt pulley that bolts to balancer - has slight ding, but can be straightened easily?

Anything that you are interested in but want to make an offer - offer away!! Not starting a museum, intend to sell these. Thanks for checking my ad.

Will try to get some photos in the next couple of days. Jay

**Grumpy old man** · 03-14-2017, 08:09 AM

Quote:

Originally Posted by Clatterville trolley

I pulled the six cylinder engine out of a 1967 parts truck I had to make it easier to remove the cab for another project. I had always wondered if it was reusable or not, so I disassembled it.
Block was cracked in two or three places. Therefore, I decided to offer up some of the good parts to help out anyone rebuilding one of these.

The list of parts:

Crankshaft - looks good haven't put a mic to it, but everything shiny with no galling or hot spots, etc. $50 plus ride
Exhaust manifold with free moving heat riser. $40 plus ride
Intake manifold with heat tube, carb., linkage. $55 plus ride
May also have an air cleaner if it is correct one - you identify $35 plus ride
Clutch cover tins (had 3 spd. trans.) $20 plus ride
Flywheel with good starter ring - no buggered up teeth. $30 plus ride
Clutch housing for standard shift trans. $45 plus ride
Clutch throw out arm. $15 plus ride
Harmonic balancer. $20 plus ride
Extra belt pulley that bolts to balancer - has slight ding, but can be straightened easily?

Anything that you are interested in but want to make an offer - offer away!! Not starting a museum, intend to sell these. Thanks for checking my ad.

Will try to get some photos in the next couple of days. Jay

How much for the extra belt pulley ? shipped to 37938

**Clatterville trolley** · 03-14-2017, 01:14 PM

What do you think about $22 shipped?

**Grumpy old man** · 03-14-2017, 01:18 PM

I'll take it , pm paypal info

Pm payment info
Posted via Mobile Device

1971c10La · 03-14-2017, 01:33 PM

Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

**Clatterville trolley** · 03-14-2017, 07:30 PM

Quote:

Originally Posted by 1971c10La

Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

Pretty sure flywheel would not work as it is for a clutch / standard shift set-up and generally the flywheel for an automatic is a totally different style in almost any usage.
I will get a photo of the air cleaner as soon as I can for you. Jay

**Clatterville trolley** · 03-15-2017, 02:50 PM

Quote:

Originally Posted by 1971c10La

Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

Here are photos of air cleaner. I thought I had the lid as well and still think so, but didn't have any luck locating it today. Jay

Name: IMG_0308.jpg
Views: 247
Size: 62.4 KB

Name: IMG_0308.jpg
Views: 247
Size: 62.4 KB

Name: IMG_0309.jpg
Views: 248
Size: 63.0 KB

Name: IMG_0310.jpg
Views: 249
Size: 71.7 KB

Name: IMG_0311.jpg
Views: 244
Size: 72.5 KB

**Clatterville trolley** · 03-15-2017, 02:55 PM

Quote:

Originally Posted by Grumpy old man

I'll take it , pm paypal info

Pm payment info
Posted via Mobile Device

Grumpy - got your payment and part will go out in next couple of days. Thanks for purchase, Jay

**Clatterville trolley** · 03-15-2017, 02:53 PM

Have photos now of other parts listed for sale in this ad:

Name: IMG_0299.JPG
Views: 241
Size: 85.1 KB

Name: IMG_0300.JPG
Views: 241
Size: 86.7 KB

Name: IMG_0302.JPG
Views: 243
Size: 96.2 KB

Name: IMG_0303.JPG
Views: 242
Size: 82.4 KB

Name: IMG_0304.JPG
Views: 240
Size: 92.5 KB

**Clatterville trolley** · 03-15-2017, 02:54 PM

Final one:

Name: IMG_0305.JPG
Views: 225
Size: 96.9 KB

RickDeVon · 03-15-2017, 07:05 PM

If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you

**Clatterville trolley** · 03-15-2017, 08:19 PM

Quote:

Originally Posted by RickDeVon

If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you

I will check it tonight and let you know, but it is an original one so I think it will have the script. Thanks, Jay

**Clatterville trolley** · 03-16-2017, 05:31 PM

Quote:

Originally Posted by RickDeVon

If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you

Sorry - checked valve cover and no script on it. Good shape though. Jay

JAP51 · 03-15-2017, 10:17 PM

I need an oil pan if not to rusty .

**Clatterville trolley** · 03-15-2017, 10:40 PM

Quote:

Originally Posted by JAP51

I need an oil pan if not to rusty .

Got one, does have a dent in the bottom - should come out OK. Jay

RickDeVon · 03-16-2017, 02:46 PM

I also need a coil bracket....Thanks Rick

**Clatterville trolley** · 03-16-2017, 05:33 PM

Quote:

Originally Posted by RickDeVon

I also need a coil bracket....Thanks Rick

I know I have a coil bracket because I remember taking it off. $10 and that includes cost of shipping. Jay

RickDeVon · 03-16-2017, 05:52 PM

Quote:

Originally Posted by Clatterville trolley

I know I have a coil bracket because I remember taking it off. $10 and that includes cost of shipping. Jay

Sounds great and let me know about the valve cover...

**Clatterville trolley** · 03-16-2017, 06:32 PM

Quote:

Originally Posted by RickDeVon

Sounds great and let me know about the valve cover...

Check up a little higher in the ad where I responded to you with the quote - about script valve cover. Jay

RickDeVon · 03-16-2017, 06:46 PM

Quote:

Originally Posted by Clatterville trolley

Check up a little higher in the ad where I responded to you with the quote - about script valve cover. Jay

Sorry I missed that...Just send pm on pay pal on coil bracket...thanks Rick

JAP51 · 03-16-2017, 02:50 PM

How much for oil pan ?

**Clatterville trolley** · 03-16-2017, 05:34 PM

Quote:

Originally Posted by JAP51

How much for oil pan ?

$25 and ride to you. Jay

JAP51 · 03-16-2017, 06:31 PM

I want the oil pan and the clutch cover tin. Can I pay by paypal? If so, please send info.

**Clatterville trolley** · 03-16-2017, 06:41 PM

Quote:

Originally Posted by JAP51

I want the oil pan and the clutch cover tin. Can I pay by paypal? If so, please send info.

PM'd you with P/P info. Jay

JAP51 · 03-16-2017, 10:37 PM

I would like to pay with paypal but need a total with shipping included. Zip code here is 32568.

03-13-2017, 10:22 PM	#1
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	250 cu. in. I6 parts for sale I pulled the six cylinder engine out of a 1967 parts truck I had to make it easier to remove the cab for another project. I had always wondered if it was reusable or not, so I disassembled it. Block was cracked in two or three places. Therefore, I decided to offer up some of the good parts to help out anyone rebuilding one of these. The list of parts: Crankshaft - looks good haven't put a mic to it, but everything shiny with no galling or hot spots, etc. $50 plus ride Exhaust manifold with free moving heat riser. $40 plus ride Intake manifold with heat tube, carb., linkage. $55 plus ride May also have an air cleaner if it is correct one - you identify $35 plus ride Clutch cover tins (had 3 spd. trans.) $20 plus ride Flywheel with good starter ring - no buggered up teeth. $30 plus ride Clutch housing for standard shift trans. $45 plus ride Clutch throw out arm. $15 plus ride Harmonic balancer. $20 plus ride SOLDExtra belt pulley that bolts to balancer - has slight ding, but can be straightened easily? Anything that you are interested in but want to make an offer - offer away!! Not starting a museum, intend to sell these. Thanks for checking my ad. Will try to get some photos in the next couple of days. Jay Last edited by Clatterville trolley; 03-15-2017 at 02:56 PM. Reason: some parts sold

03-14-2017, 01:14 PM	#3
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 250 cu. in. I6 parts for sale What do you think about $22 shipped?

03-14-2017, 01:18 PM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 250 cu. in. I6 parts for sale I'll take it , pm paypal info Pm payment info Posted via Mobile Device Last edited by Grumpy old man; 03-14-2017 at 06:01 PM.

03-14-2017, 01:33 PM	#5
1971c10La Registered User Join Date: Feb 2016 Location: Mer Rouge la Posts: 72	Re: 250 cu. in. I6 parts for sale Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

03-15-2017, 02:53 PM	#9
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 250 cu. in. I6 parts for sale Have photos now of other parts listed for sale in this ad:

03-15-2017, 02:54 PM	#10
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 250 cu. in. I6 parts for sale Final one:

03-15-2017, 07:05 PM	#11
RickDeVon Registered User Join Date: Aug 2015 Location: Pine Mountain, Georgia Posts: 125	Re: 250 cu. in. I6 parts for sale If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you __________________ 71 C10 I6 250 TH350 power steering and power breaks...

03-15-2017, 10:17 PM	#14
JAP51 Registered User Join Date: Jun 2016 Location: Walnut Hill, Fl Posts: 14	Re: 250 cu. in. I6 parts for sale I need an oil pan if not to rusty .

03-16-2017, 02:46 PM	#16
RickDeVon Registered User Join Date: Aug 2015 Location: Pine Mountain, Georgia Posts: 125	Re: 250 cu. in. I6 parts for sale I also need a coil bracket....Thanks Rick __________________ 71 C10 I6 250 TH350 power steering and power breaks...

03-16-2017, 02:50 PM	#21
JAP51 Registered User Join Date: Jun 2016 Location: Walnut Hill, Fl Posts: 14	Re: 250 cu. in. I6 parts for sale How much for oil pan ?

03-16-2017, 06:31 PM	#23
JAP51 Registered User Join Date: Jun 2016 Location: Walnut Hill, Fl Posts: 14	Re: 250 cu. in. I6 parts for sale I want the oil pan and the clutch cover tin. Can I pay by paypal? If so, please send info.

03-16-2017, 10:37 PM	#25
JAP51 Registered User Join Date: Jun 2016 Location: Walnut Hill, Fl Posts: 14	Re: 250 cu. in. I6 parts for sale I would like to pay with paypal but need a total with shipping included. Zip code here is 32568.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.