![]() |
|
![]() |
#1 |
Registered User
Join Date: Oct 2015
Location: San Tan Valley, Arizona
Posts: 313
|
Shock bolts
I need to change my shocks. The bolts are old and rusty. Can I just get new grade8 hardware from the local hardware or are they special? My front shocks came with some sort of special bolt, but the rears just look like standard bolts. If I need to order something I would rather wait to take the old ones off. Thanks!
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Shock bolts
Mine had regular bolts for the shocks, not sure if they were original but they sure looked 45 years old!
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Dec 2011
Location: Reading,Pa.
Posts: 440
|
Re: Shock bolts
off the shelf grade 8 bolts and nuts will be fine.if upper front shock stud gives you problems they can be purchased for around 4.00$...just picked some up from speedway motors for a project.....
__________________
![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2014
Location: Southwest Kansas
Posts: 306
|
Re: Shock bolts
I always buy Monroe shocks and they come with all the hardware. Especially the front one, that special bolt is always included.
__________________
'64 C10 LWB, 283, 5speed '68 C20 LWB, 327, 4speed '69 C20 Custom Camper Longhorn, 350, 4speed '72 C20 Cheyenne Super, 396, TH400 '66 C60, 292, 4speed |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2015
Location: San Tan Valley, Arizona
Posts: 313
|
Re: Shock bolts
Thanks for the help everyone. The shocks are KYB gas adjust. The front ones did come with some sort of special bolt.
|
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: May 2016
Location: Sackets harbor ny
Posts: 282
|
Re: Shock bolts
I just installed the same shocks. Mine came with the upper bolts. For the front ones. The rear ones didn't have any. So I bought the grade 8 bolts.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|