|
|
|
10-21-2003, 11:35 AM
|
#1 |
|
Senior Member
Join Date: Mar 2000
Location: East Peoria, IL
Posts: 600
|
Q? on ECE drop coils
Just removed the stock front coil springs from my 68. They are about 1.5" taller than my "stock height" ECE coils I bought. The wire diameter seems to be bigger on the ECE coils. Is this the way they're supposed to be? I'll check the rate at work later today........but I don't want to install the wrong springs in the front and have to pull them out if they are a drop coil, I'm trying to verify that I was shipped the right coils. thanks
__________________
1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies |
|
|
|
10-21-2003, 04:11 PM
|
#2 |
|
Registered User
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
|
They should have the model number stamped on them. I would call up ECE and double check, but I have heard there are some differences like you said between stock and Aftermarket drop coils.
__________________
Just sitting here contemplating contemplation. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
