1963 suburban build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lownslw64 · 05-14-2017, 09:36 AM

I purchased this suburban about 5 months ago and is fairly good condition. It has a 327/4 spd saginaw with 307 gears in it currently with around 5k on it. Originally a 292/3 spd column truck. The interior is pretty much stock which was one of the reasons i bought it. All three rows of stock seats are there. I currently took out the small seat for more room in the back. It has had one repaint on it. originally a fawn exterior with white top. I have had to do some small stuff since i have purchased it like rebuild rear brakes, install new master cylinder, new fluids/gasket on rearend and new valve cover gaskets. Plans.... lower it a little, find stock hubcaps, Aluminum 63 grill, gathering parts to put in my ls1/4l60e combo in it next winter hopefully. Drive it with my family!

**Classic v6 GMC's** · 05-14-2017, 10:03 AM

Nice Suburban!

lownslw64 · 06-24-2017, 09:26 AM

lowered it a bit!

pimpston65 · 06-24-2017, 10:52 AM

Quote:

Originally Posted by lownslw64

lowered it a bit!

you could sell the middle seat quick

**sirJim** · 06-25-2017, 04:04 AM

Nice!

lownslw64 · 06-25-2017, 08:35 PM

thanks! yeah, I'm planning on keeping the middle seat for a while. when i was looking for a suburban that was one of my items to have due to the lack of them out there. thanks for the heads up though.

**mongocanfly** · 06-26-2017, 10:18 PM

Sweet burb..very clean
Defiantly begging for some altitude adjustment...

lownslw64 · 09-07-2018, 09:12 AM

Been working on my suburban a bit. Cleaned up a aluminum grill and put it on as well as a new to me chrome front bumper and hubcaps. I have been collecting parts to do a ls swap on it this fall so started to install them. I pulled the stock tank and added a boyd welding tank with pump inside and plumbed new stainless line with filter and AN lines for supply and return to tank. Next I will pull my steering column and install a auto column out of a 70's van that i had rebuilt.

lownslw64 · 09-07-2018, 09:28 AM

Here are some pics!

lownslw64 · 09-07-2018, 09:35 AM

Some more!

**sirJim** · 09-08-2018, 02:22 AM

Looking good!

Quote:

Originally Posted by lownslw64

Some more!

clemsonteg · 12-11-2018, 09:36 PM

Did you order a burb specific tank for your build or did you use the pickup version? Any issues mounting it?

AJCK87 · 12-12-2018, 03:07 PM

What is the fuel capacity in those stock suburban fuel tanks?

lownslw64 · 12-12-2018, 07:33 PM

ajck87- I think they are 16-17 gallons stock. The boyd tank is 19 gallons with a fuel pump in it.

lownslw64 · 12-13-2018, 10:44 AM

out with the old and in with the new. Installed a 70 van tilt column and custom steering wheel.

lownslw64 · 12-13-2018, 10:45 AM

one more.

Southcity · 12-16-2018, 07:17 PM

Great looking Burb and great progress on your recent improvements. They'll make a big difference in driving enjoyment and reliability. Keep the photos coming!

lownslw64 · 12-20-2018, 10:29 AM

Thanks Southcity! Yeah, that's my hope to make it more driver friendly. Next is a ls1/4l60e and a 89 suburban front suspension in it.

**ChiefRocka** · 12-23-2018, 01:33 AM

Great looking Burban !!

My favorite year

Great improvements so far !

lownslw64 · 12-23-2018, 12:11 PM

Thanks chief! Any progress on yours?

lownslw64 · 03-22-2020, 12:56 PM

Hi all, wanted to update this thread on the fairly recent upgrades i have done to my suburban. I have installed ls1/4l60e (finally after 10 yrs haha), psi harness, new gauges, aluminum radiator, rebuild rearend to 3:73/posi, rebuild and installed front end out of 89 suburban with disc brakes and power steering, high hump trans tunnel, filled holes in firewall and painted engine bay and all new components. I decided to keep my og wheels so i bought 6 lug discs for the front. i lowered it another 1.5 all around. all new brakes lines, fuel lines, trans cooler lines and tires. i did it all about 6 months ago and have put about 3k or more miles on it and what a different vehicle it is....sorry about the sideways pics....

lownslw64 · 03-22-2020, 01:03 PM

Pics

lownslw64 · 03-22-2020, 01:09 PM

More pics

lownslw64 · 03-22-2020, 01:13 PM

next will be deadend garage c-notch, adj. panhard bar and rear shock relocation brackets, vintage air and american autowire wiring kit. Main goal is to keep it on the road and enjoy it!

Southcity · 03-22-2020, 02:29 PM

"Main goal is to keep it on the road and enjoy it!"

I'd say you've done a fine job so far to achieve your goal. And that new stance with the steelies and caps - outstanding! Curious on your tire size 235/75/15? keep the pics and updates coming and stay safe out there!

05-14-2017, 09:36 AM	#1
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	1963 suburban build I purchased this suburban about 5 months ago and is fairly good condition. It has a 327/4 spd saginaw with 307 gears in it currently with around 5k on it. Originally a 292/3 spd column truck. The interior is pretty much stock which was one of the reasons i bought it. All three rows of stock seats are there. I currently took out the small seat for more room in the back. It has had one repaint on it. originally a fawn exterior with white top. I have had to do some small stuff since i have purchased it like rebuild rear brakes, install new master cylinder, new fluids/gasket on rearend and new valve cover gaskets. Plans.... lower it a little, find stock hubcaps, Aluminum 63 grill, gathering parts to put in my ls1/4l60e combo in it next winter hopefully. Drive it with my family! Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax Last edited by lownslw64; 05-14-2017 at 09:49 AM.

05-14-2017, 10:03 AM	#2
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 1963 suburban build Nice Suburban! __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

06-24-2017, 09:26 AM	#3
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build lowered it a bit! Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

06-25-2017, 04:04 AM	#5
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 1963 suburban build Nice!

06-25-2017, 08:35 PM	#6
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build thanks! yeah, I'm planning on keeping the middle seat for a while. when i was looking for a suburban that was one of my items to have due to the lack of them out there. thanks for the heads up though. __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

06-26-2017, 10:18 PM	#7
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: 1963 suburban build Sweet burb..very clean Defiantly begging for some altitude adjustment...

09-07-2018, 09:12 AM	#8
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build Been working on my suburban a bit. Cleaned up a aluminum grill and put it on as well as a new to me chrome front bumper and hubcaps. I have been collecting parts to do a ls swap on it this fall so started to install them. I pulled the stock tank and added a boyd welding tank with pump inside and plumbed new stainless line with filter and AN lines for supply and return to tank. Next I will pull my steering column and install a auto column out of a 70's van that i had rebuilt. __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

09-07-2018, 09:28 AM	#9
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build Here are some pics! Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

09-07-2018, 09:35 AM	#10
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build Some more! Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

12-11-2018, 09:36 PM	#12
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: 1963 suburban build Did you order a burb specific tank for your build or did you use the pickup version? Any issues mounting it?

12-12-2018, 03:07 PM	#13
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 suburban build What is the fuel capacity in those stock suburban fuel tanks?

12-12-2018, 07:33 PM	#14
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build ajck87- I think they are 16-17 gallons stock. The boyd tank is 19 gallons with a fuel pump in it. __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

12-13-2018, 10:44 AM	#15
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build out with the old and in with the new. Installed a 70 van tilt column and custom steering wheel. Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

12-13-2018, 10:45 AM	#16
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build one more. Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

12-16-2018, 07:17 PM	#17
Southcity Registered User Join Date: Aug 2007 Location: Redwood City, CA Posts: 1,177	Re: 1963 suburban build Great looking Burb and great progress on your recent improvements. They'll make a big difference in driving enjoyment and reliability. Keep the photos coming! __________________ 66 GMC Suburban Custom 66 Chevy K10 Suburban



Register or Log In To remove these advertisements.

12-20-2018, 10:29 AM	#18
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build Thanks Southcity! Yeah, that's my hope to make it more driver friendly. Next is a ls1/4l60e and a 89 suburban front suspension in it. __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

12-23-2018, 01:33 AM	#19
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: 1963 suburban build Great looking Burban !! My favorite year Great improvements so far ! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

12-23-2018, 12:11 PM	#20
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build Thanks chief! Any progress on yours? __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

03-22-2020, 12:56 PM	#21
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build Hi all, wanted to update this thread on the fairly recent upgrades i have done to my suburban. I have installed ls1/4l60e (finally after 10 yrs haha), psi harness, new gauges, aluminum radiator, rebuild rearend to 3:73/posi, rebuild and installed front end out of 89 suburban with disc brakes and power steering, high hump trans tunnel, filled holes in firewall and painted engine bay and all new components. I decided to keep my og wheels so i bought 6 lug discs for the front. i lowered it another 1.5 all around. all new brakes lines, fuel lines, trans cooler lines and tires. i did it all about 6 months ago and have put about 3k or more miles on it and what a different vehicle it is....sorry about the sideways pics.... __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax Last edited by lownslw64; 03-22-2020 at 01:14 PM.

03-22-2020, 01:03 PM	#22
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build Pics Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

03-22-2020, 01:09 PM	#23
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build More pics Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

03-22-2020, 01:13 PM	#24
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: 1963 suburban build next will be deadend garage c-notch, adj. panhard bar and rear shock relocation brackets, vintage air and american autowire wiring kit. Main goal is to keep it on the road and enjoy it! __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

03-22-2020, 02:29 PM	#25
Southcity Registered User Join Date: Aug 2007 Location: Redwood City, CA Posts: 1,177	Re: 1963 suburban build "Main goal is to keep it on the road and enjoy it!" I'd say you've done a fine job so far to achieve your goal. And that new stance with the steelies and caps - outstanding! Curious on your tire size 235/75/15? keep the pics and updates coming and stay safe out there! Last edited by Southcity; 03-22-2020 at 02:51 PM.

Register or Log In To remove these advertisements.