OR Partaily restored 69-72 tach cluster

[TBONE1964]

I have here a partially restored original tach cluster for a 69-72 Chevy truck. New aftermarket bezel. The tach is non working. It needs a circuit board. The speedometer has been calibrated, odometer to zero but can be set to your choice, fuel gauges, temp, amp, and oil pressure gauge have all been tested and OK. I need $300.00 plus shipping. For an additional $175.00, I will replace the tach with an aftermarket and circuit board, as well as new bulbs. Look closely at photos and ask questions. This is not a perfect restoration.

Thank you for looking. By the way, if I sell this cluster, I will put the money up for a High Octane membership.

Take care,
Tom

[TBONE1964]

TTT,

Make a reasonable offer on this if interested.

Thank you,
Tom

[TBONE1964]

weekend bump.

[rusty knuckles 5]

HI! what is wrong with the tach

[TBONE1964]

Originally Posted by rusty knuckles 5

HI! what is wrong with the tach

Good question. I got this tach and it was assumed non working so that is how I am selling it. I suppose it would be a good idea to test it and see why it does not work.

Stay tuned, I will check it today and report my findings.

Thank you for the interest,
Tom

[TBONE1964]

Originally Posted by rusty knuckles 5

HI! what is wrong with the tach

I guess I should have tested this tach earlier. The tach does work but needle sticks at 2600 RPM then falls back. Works great up to 2600. I have seen this before and sometime just using the tach will bring them back to life but it is not guaranteed.

[rusty knuckles 5]

thank you

[TBONE1964]

TTT

175.00 shipped within conus, as it sets. The tins, lens and bezel are with this much.

[LockDoc]

Originally Posted by TBONE1964

TTT

175.00 shipped within conus, as it sets. The tins, lens and bezel are with this much.

I will take it Tom.

LockDoc

[TBONE1964]

Originally Posted by LockDoc

I will take it Tom.

LockDoc

Thank you Leon. I will send you PM with details.

Take care,
Tom

[LockDoc]

Originally Posted by TBONE1964

Thank you Leon. I will send you PM with details.

Take care,
Tom

PayPal sent + fees.

Thanks,
LockDoc

[russgoodman]

Originally Posted by TBONE1964

TTT

175.00 shipped within conus, as it sets. The tins, lens and bezel are with this much.

Tom, I will take it. Can you still replace the tach and circuit board/bulbs for the extra $175? Might be interested in the voltage gauge upgrade too since I will be using AAW wiring kit.

Thanks
Russ


Nevermind, Leon beat me to it.

[TBONE1964]

Originally Posted by russgoodman

Tom, I will take it. Can you still replace the tach and circuit board/bulbs for the extra $175? Might be interested in the voltage gauge upgrade too since I will be using AAW wiring kit.

Thanks
Russ


Nevermind, Leon beat me to it.

Thanks anyway. If Leon backs out, I will contact you.

Take care,
Tom