1970 tilt column

[pete schumpert]

i just replaced the turn signal switch and i need to know what goes between the cancelling cam and the switch. (spring and anything else ?)and does the spring just sit on the nut? and does anyone have what i need? Thanks Pete

[70shortfleet]

Yes, the spring just sits on top of the nut, then the canceling cam goes over the spring, steering wheel next and then the nut to tighten down the wheel

[Classic Bowties]

Originally Posted by pete schumpert

i just replaced the turn signal switch and i need to know what goes between the cancelling cam and the switch. (spring and anything else ?)and does the spring just sit on the nut? and does anyone have what i need? Thanks Pete

Hi Pete, here are some of our old saved file pics from years past showing the tilt column specific parts pertaining to your thread question. If you end up finding that some parts are missing/needed, feel free to contact us. We have a pretty good on hand selection of both tilt and non-tilt column parts available in GM NOS, reproduction and good OE used condition. Mel

[Classic Bowties]

Tilt pics...

[pete schumpert]

Originally Posted by Classic Bowties

Tilt pics...

Ok great thanks,
I need the
spring
lower bearing retainer and clip
lower shifter arm bushing (linkage arm bushing)
and the pin that holds the shifter handle
neutral safty swith
Thank you very much Pete

[Classic Bowties]

Originally Posted by pete schumpert

Ok great thanks,
I need the
spring
lower bearing retainer and clip
lower shifter arm bushing (linkage arm bushing)
and the pin that holds the shifter handle
neutral safty swith
Thank you very much Pete

Hey Pete, we just got your requested parts listed in a separate parts board F/S thread (linked below), have a look and let us know, Mel.

Parts board link: http://67-72chevytrucks.com/vboard/s...=1#post7970298

[70cst]

Classic Bowties - Great info. Thanks