350 4 bolt main TBI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigunde** · 10-23-2003, 12:53 PM

I have a complete running(smokes some)350 tbi engine from a 1990 2500 chevy truck.Asking $300 or offer

68_c10_on20s · 10-24-2003, 08:41 PM

is the block a stardard bore or ever been rebuilt and crank as well im wanting to rebuild mine but having another would be alot easier also you know if its a rollor motor or not ive heard some are some arnt only way to tell is pull intake

**bigunde** · 10-27-2003, 09:29 PM

i know it is all standard and it runs.i am not sure on the roller.

GSXMEN · 10-27-2003, 10:25 PM

Being a truck engine, it should be a hyd. flat tappet cam. BUT...the block still has the provisions for the roller cam setup. Just hit the junkyard and pull all the roller stuff out of a Caprice or something.

phantom dually · 10-27-2003, 11:59 PM

have a 94 with a 305. were these roller motors??

68_c10_on20s · 10-28-2003, 06:14 PM

i have a new hyd cam in my garage i want to rebuild the motor in my truck but only need a short block will you seperate and ship the short block to Houston and if so price please i have a good set of heads and was planning on rebuilding my motor but if i can get another block at a good price i will....Steve

CEDJUNIOR · 10-29-2003, 11:35 AM

None of the truck engines were roller till the Vortecs came out in '96, although the blocks are already machined and stuff to drop a roller cam set in.

**bigunde** · 10-29-2003, 11:36 AM

anyone want it?

10-23-2003, 12:53 PM	#1
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	350 4 bolt main TBI I have a complete running(smokes some)350 tbi engine from a 1990 2500 chevy truck.Asking $300 or offer

10-24-2003, 08:41 PM	#2
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	motor is the block a stardard bore or ever been rebuilt and crank as well im wanting to rebuild mine but having another would be alot easier also you know if its a rollor motor or not ive heard some are some arnt only way to tell is pull intake __________________ 93 Fleet Budget Build http://s150.photobucket.com/albums/s...zted71/hoopty/

10-27-2003, 10:25 PM	#4
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Being a truck engine, it should be a hyd. flat tappet cam. BUT...the block still has the provisions for the roller cam setup. Just hit the junkyard and pull all the roller stuff out of a Caprice or something. __________________ Scott

10-27-2003, 11:59 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	have a 94 with a 305. were these roller motors?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-28-2003, 06:14 PM	#6
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	motor i have a new hyd cam in my garage i want to rebuild the motor in my truck but only need a short block will you seperate and ship the short block to Houston and if so price please i have a good set of heads and was planning on rebuilding my motor but if i can get another block at a good price i will....Steve __________________ 93 Fleet Budget Build http://s150.photobucket.com/albums/s...zted71/hoopty/

10-27-2003, 09:29 PM	#3
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	i know it is all standard and it runs.i am not sure on the roller.

10-29-2003, 11:35 AM	#7
CEDJUNIOR Registered User Join Date: Mar 2003 Location: Irving/Valley Ranch, Tx Posts: 897	None of the truck engines were roller till the Vortecs came out in '96, although the blocks are already machined and stuff to drop a roller cam set in. __________________ GM RPO Codes '95 K1500 4x4 Ext Cab 5.7 TBI NV4500 Tranny, 14 Bolt swapped in, locker, 3.73's

10-29-2003, 11:36 AM	#8
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	anyone want it?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.