Parts for sale! PS. Auto non tilt column, etc... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oteixeira · 10-24-2003, 02:02 PM

Hi all,

Have some parts I would like to move:

I have:

- P/S pump, with all sb brackets, and pully. $60 obo

- Set of 6 lug rally rims, with trim rings but only two caps (4x4 type), with mounted Bridgestone Deuler tires with less then 5000 miles - $200

- Complete 70 non A/C cab, with little rust on outer rockers, cab corners, and two small rot holes at the bottom of the side of the cowl. $150

- 2 x used HEI distributers, unknown condition, but they seem to function normally, just haven't used them $15 each

- Quadrajet for a '70 sb truck, needs rebuild $25

- Drivers side saddle tank, this is the one WITHOUT the sending unit $30

- Cowl off of a '70 decent shape $25

- Imperial (branded on the switch end) 3 tank switch mounted in cab floor on drivers side, seems locked up, but may be rebuildable $15

- Used Edelbrock torker manifold. Could use a beed blasting $25

- Holly 600CFM carb, needs rebuild $25

- 69/70 Chevy Grill (Complete) - Outer grill has all the black faded off, but is in nice shape. Inner grill has a few broken spots, will include turn signal setup as well as headlight trim (the headlight trim has some surface rust) - $100

- 69/70 hood - $25, come get it.

- Drivers side inner fender, good shape, no rot, could use sanding and paint - $25

- 69/70 Front Fenders (both), they both need the lower patch panels as far as I can tell, $40 for both of them.

I am not willing to ship the rims/tires, the cab or other LARGE parts. UPDATED, lower prices.....

Thanks,

Orlando

mocwon · 10-24-2003, 02:13 PM

I'll buy the intake. Ley me know shipping to business address in zip code 78744 (Austin, TX).

72shadetree · 10-25-2003, 08:46 AM

how much shipping for the x member and column to 24055 where is wilson im in martinsville va thx

69&72Bowties · 10-25-2003, 06:05 PM

Auto stearing column, all that is wrong is the plastic part from the indicator is missing $30 obo

Do you have all the linkage for an automatic also?

oteixeira · 10-25-2003, 11:02 PM

72shadetree,

Wilson is right off of I-95, exit 121. I would have to figure shipping, I will PM you with them amount unless you tell me you are going to come pick them up here.

69&72Bowties,

I am sorry, no auto linkage....

Orlando

72shadetree · 10-26-2003, 12:07 AM

let me know on shipping thats a good distance from here

oteixeira · 10-26-2003, 11:17 AM

Hey,

Mocwon-The intake shipped to your door would be:

15.31 normal
19.75 Priority

So total cost would be either 40.31 or 44.75

72shadetree:

the two parts (column and crossmember) shipped to your door:

15.29 normal
25.95 priority (we are so close I see no reason to pick this)

So total cost would be either 70.29 or 80.95

Thanks guys...If you want them let me know, and I will pm you an address to send a money order to.

Orlando

69C10Atl · 10-26-2003, 03:16 PM

IS this the ps bracket you have, if so what would shipping be to 30360

72shadetree · 10-26-2003, 04:09 PM

thanks sent you a pm consider the column and x member sold

oteixeira · 10-26-2003, 06:57 PM

69C10Atl,

Yup, thats it. Plus the pump and pully. It will be $12 to ship. So that is $87 if you want it, pm me for my addy if you want it.

Orlando

BigBlockBurris · 10-26-2003, 07:04 PM

PM Sent!!!!

oteixeira · 10-27-2003, 12:00 AM

BigBlockBurris,

Tried to PM you back but your box is full......

BigBlockBurris · 10-27-2003, 12:16 AM

Sorry about that. It's empty now. Thanks

BBB

oteixeira · 10-27-2003, 11:09 AM

BBB, you now have a PM

Orlando

oteixeira · 10-28-2003, 10:23 AM

BUMP

72shadetree · 10-28-2003, 10:28 AM

sent mo yesterday for the other stuff
would you ship inner fender if so how much 24055

oteixeira · 10-28-2003, 11:09 AM

72,

Not sure it would be woth shipping to you, It is big, and odd sized, and may almost double in cost if I were to ship it. Sounds like you just need to make a weekend trip to my place!

Orlando

72shadetree · 10-28-2003, 01:45 PM

thanks pm sent

bryondillon · 10-28-2003, 05:58 PM

Do you have a picture of the outer grill?

oteixeira · 10-29-2003, 12:25 AM

Bryon,

With the time change and all the rain I have been having a hard time taking pics, but I will see what I can do for you.

Orlando

oteixeira · 10-29-2003, 02:01 PM

^^^

oteixeira · 11-02-2003, 11:29 AM

If they dont show up follow these links:
http://www.geocities.com/oandcteixeira/DCP_0010.JPG
http://www.geocities.com/oandcteixeira/DCP_0011.JPG
http://www.geocities.com/oandcteixeira/DCP_0012.JPG
http://www.geocities.com/oandcteixeira/DCP_0013.JPG
http://www.geocities.com/oandcteixeira/DCP_0014.JPG
http://www.geocities.com/oandcteixeira/DCP_0015.JPG
http://www.geocities.com/oandcteixeira/DCP_0016.JPG

Orlando

10-24-2003, 02:02 PM	#1
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Parts for sale! PS. Auto non tilt column, etc... Hi all, Have some parts I would like to move: I have: - P/S pump, with all sb brackets, and pully. $60 obo - Set of 6 lug rally rims, with trim rings but only two caps (4x4 type), with mounted Bridgestone Deuler tires with less then 5000 miles - $200 - Complete 70 non A/C cab, with little rust on outer rockers, cab corners, and two small rot holes at the bottom of the side of the cowl. $150 - 2 x used HEI distributers, unknown condition, but they seem to function normally, just haven't used them $15 each - Quadrajet for a '70 sb truck, needs rebuild $25 - Drivers side saddle tank, this is the one WITHOUT the sending unit $30 - Cowl off of a '70 decent shape $25 - Imperial (branded on the switch end) 3 tank switch mounted in cab floor on drivers side, seems locked up, but may be rebuildable $15 - Used Edelbrock torker manifold. Could use a beed blasting $25 - Holly 600CFM carb, needs rebuild $25 - 69/70 Chevy Grill (Complete) - Outer grill has all the black faded off, but is in nice shape. Inner grill has a few broken spots, will include turn signal setup as well as headlight trim (the headlight trim has some surface rust) - $100 - 69/70 hood - $25, come get it. - Drivers side inner fender, good shape, no rot, could use sanding and paint - $25 - 69/70 Front Fenders (both), they both need the lower patch panels as far as I can tell, $40 for both of them. I am not willing to ship the rims/tires, the cab or other LARGE parts. UPDATED, lower prices..... Thanks, Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251 Last edited by oteixeira; 10-28-2003 at 10:23 AM.

10-24-2003, 02:13 PM	#2
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Used Edelbrock torker manifold. Could use a beed blasting $25 I'll buy the intake. Ley me know shipping to business address in zip code 78744 (Austin, TX). __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

10-25-2003, 08:46 AM	#3
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	how much shipping for the x member and column to 24055 where is wilson im in martinsville va thx __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

10-25-2003, 06:05 PM	#4
69&72Bowties Registered User Join Date: Jun 2002 Location: Pineville, LA Posts: 78	steering column Auto stearing column, all that is wrong is the plastic part from the indicator is missing $30 obo Do you have all the linkage for an automatic also? __________________ Bryan@ideamill.net 71 Chevy Custom 20 Suburban 69 Chevy Camaro

10-25-2003, 11:02 PM	#5
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Anwsers 72shadetree, Wilson is right off of I-95, exit 121. I would have to figure shipping, I will PM you with them amount unless you tell me you are going to come pick them up here. 69&72Bowties, I am sorry, no auto linkage.... Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

10-26-2003, 12:07 AM	#6
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	let me know on shipping thats a good distance from here __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

10-26-2003, 11:17 AM	#7
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Postage amounts Hey, Mocwon-The intake shipped to your door would be: 15.31 normal 19.75 Priority So total cost would be either 40.31 or 44.75 72shadetree: the two parts (column and crossmember) shipped to your door: 15.29 normal 25.95 priority (we are so close I see no reason to pick this) So total cost would be either 70.29 or 80.95 Thanks guys...If you want them let me know, and I will pm you an address to send a money order to. Orlando

10-26-2003, 03:16 PM	#8
69C10Atl Trying to stick with it Join Date: Jul 2002 Location: Atlanta,GA Posts: 115	IS this the ps bracket you have, if so what would shipping be to 30360 Attached Images __________________ 69 Chevy C10 LWB somewhere in the pile of parts in my garage. 01 Cadillac STS as daily driver

10-26-2003, 04:09 PM	#9
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	thanks sent you a pm consider the column and x member sold __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

10-26-2003, 06:57 PM	#10
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	P/S stuff 69C10Atl, Yup, thats it. Plus the pump and pully. It will be $12 to ship. So that is $87 if you want it, pm me for my addy if you want it. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

10-26-2003, 07:04 PM	#11
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	PM sent! PM Sent!!!!

10-27-2003, 12:00 AM	#12
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Mail is full BigBlockBurris, Tried to PM you back but your box is full......

10-27-2003, 12:16 AM	#13
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	PM box Sorry about that. It's empty now. Thanks BBB

10-27-2003, 11:09 AM	#14
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	BBB, you now have a PM Orlando

10-28-2003, 10:23 AM	#15
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Bump - added stuff & lowered prices BUMP __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251



Register or Log In To remove these advertisements.

10-28-2003, 10:28 AM	#16
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	sent mo yesterday for the other stuff would you ship inner fender if so how much 24055 __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

10-28-2003, 11:09 AM	#17
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	72, Not sure it would be woth shipping to you, It is big, and odd sized, and may almost double in cost if I were to ship it. Sounds like you just need to make a weekend trip to my place! Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

10-28-2003, 01:45 PM	#18
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	thanks pm sent __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

10-28-2003, 05:58 PM	#19
bryondillon Registered User Join Date: Oct 2003 Location: Sumner, Wa Posts: 11	Do you have a picture of the outer grill? __________________ Someday I might get my truck running again =(

10-29-2003, 12:25 AM	#20
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Pictures Bryon, With the time change and all the rain I have been having a hard time taking pics, but I will see what I can do for you. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

10-29-2003, 02:01 PM	#21
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	^^^ __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

11-02-2003, 11:29 AM	#22
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Pics of the grill If they dont show up follow these links: http://www.geocities.com/oandcteixeira/DCP_0010.JPG http://www.geocities.com/oandcteixeira/DCP_0011.JPG http://www.geocities.com/oandcteixeira/DCP_0012.JPG http://www.geocities.com/oandcteixeira/DCP_0013.JPG http://www.geocities.com/oandcteixeira/DCP_0014.JPG http://www.geocities.com/oandcteixeira/DCP_0015.JPG http://www.geocities.com/oandcteixeira/DCP_0016.JPG Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251 Last edited by oteixeira; 11-02-2003 at 11:33 AM.

Register or Log In To remove these advertisements.