Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-13-2017, 07:11 PM | #1 |
Registered User
Join Date: Dec 2010
Location: Sherwood, Arkansas
Posts: 156
|
1968 rear brake line/brake hose schematic needed
So I get under my '68 1/2 ton 2wd fleetside to spray the rubber brake line fittings with penatrating oil to start soaking the fittings, only to find one rubber hose, on the passenger side. The drivers side does not have a rubber hose, it has all hard lines and nothing on the frame where the rubber hose would be, on the passengers side. What am I missing here?
|
07-13-2017, 07:21 PM | #2 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
|
Re: 1968 rear brake line/brake hose schematic needed
Nothing. There is only one rubber line from the passenger side frame rail to a union block near the differential. Then hard lines from the union block to the wheel cylinders behind the backing plate.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
07-13-2017, 07:29 PM | #3 |
Registered User
Join Date: Dec 2010
Location: Sherwood, Arkansas
Posts: 156
|
Re: 1968 rear brake line/brake hose schematic needed
|
07-13-2017, 11:49 PM | #4 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
|
Re: 1968 rear brake line/brake hose schematic needed
The front has one rubber line per side. 67-70 they will be attached to the rear of the front cross member. 71-72 they will be attached to the front of the cross member (disc brake trucks). Where they "attach" is where they meet the steel lines.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
07-13-2017, 07:37 PM | #5 |
Moderator
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,204
|
Re: 1968 rear brake line/brake hose schematic needed
Check out the link below to the LMC catalog...
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=149 It will show you the layout and also part numbers if want to purchase parts... |
07-15-2017, 07:15 PM | #6 | |
Registered User
Join Date: Dec 2010
Location: Sherwood, Arkansas
Posts: 156
|
Re: 1968 rear brake line/brake hose schematic needed
Quote:
|
|
07-15-2017, 08:41 PM | #7 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,536
|
Re: 1968 rear brake line/brake hose schematic needed
Unfortunately those illustrations in LMC don't help you much. I did a quick search at NAPA parts and there is a real pic of the hose and for less than $20. Have a look.
https://www.napaonline.com/en/p/UBK36542
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
07-15-2017, 09:07 PM | #8 | |
Registered User
Join Date: Dec 2010
Location: Sherwood, Arkansas
Posts: 156
|
Re: 1968 rear brake line/brake hose schematic needed
Quote:
|
|
07-13-2017, 07:29 PM | #9 |
Registered User
Join Date: Dec 2010
Location: Sherwood, Arkansas
Posts: 156
|
Re: 1968 rear brake line/brake hose schematic needed
Awesome sauce!!!! Thanks!
|
Bookmarks |
|
|