The truck that started it all.

[Zachary17]

So I figure I'd share the story of the truck that started my addiction to squarebody trucks.So 3 years ago when I was 17 and I needed to have my own truck.so for a few weeks I searched Craigslist and there where not many good trucks on there asking to much for what thay worth or where used as farm trucks but I was looking for a stepside and diesel but finding that was not easy anyway.so fast forward to November of 2014 I was stil looking for a truck when I found a ad on Craigslist no pictures and listed as an 82 c10 so I called the guy it was Owend by nice older man who didn't know much about the truck but he wonted 1800 for it so I wasn't expecting a whole lot but when I got there what I found was not what I was expecting. So here's the truck it's an 82 c10 Silverado long bed 305 th350 ran good the interior was clean and the ac even worked.and the paint clean. So here's what I came home with.
Posted via Mobile Device

[Zachary17]

And the interior.
Posted via Mobile Device

[MrFinland]

Very nice truck and I like the color! Do you know what color code your truck is? Do you have pictures of engine room, because I would like to see it, if it is in the original condition?

[Zachary17]

Originally Posted by MrFinland

Very nice truck and I like the color! Do you know what color code your truck is? Do you have pictures of engine room, because I would like to see it, if it is in the original condition?

thanks.the engine bay is a mass but original.now for the paint the build sheet says 63 LT BRONZE MET and 59 MED ALMOND CUS.hope that helps.
Posted via Mobile Device

[MrFinland]

Originally Posted by Zachary17

thanks.the engine bay is a mass but original.now for the paint the build sheet says 63 LT BRONZE MET and 59 MED ALMOND CUS.hope that helps.
Posted via Mobile Device

Thanks a lot! If I remember correctly, our truck will be painted with the same color as your truck? I like very much your original truck.

[Zachary17]

Ok everyone it’s Been some time since I last posted.anyways i have done so much with this truck in the last year so I figured go through the list.anyways I just drove the truck for a while till it started leaking coolant so in November I decided to pull the engine.

[Zachary17]

Ok the pictures I wanted to upload yesterday wont work so guess I won’t use them oh well.so in November I pulled the front end off pulled the engine and trans out.i than got a new water pump and freeze plugs got em installed on the motor put the motor back in the truck than in December I rebuilt the ac and heater box new heater core ac coil new fan.than bought a box of 3m strip caulk to seal them up no more ugly tape on the outside.put the front end back on got the truck running again no leaks.than I just drove the truck for a few months till my truck lust got the best of me! And I bought this

[Zachary17]

The truck in back is a parts truck I bought it may.it’s an.82 c10 Silverado 6.2 diesel 700r4 fully loaded truck I was gonna fix it but the truck was in a werck and bent one of the frame horns and someone put a new fender hood and core support on it and called it good till the 10 bolt blew and than the po parked it in a field for the last 6 years so I bought it cheap got it home tried to start it.the engine turned over but it had low compression bad rings so I pulled the engine and trans out and decided to part out the rest

[Zachary17]

So the main reason I bought the truck is for the engine and it’s a good one.The 6.2 is an early 81 red block with crack free main webs and heads! So my plans for it are to have my machine shop clean it up and Punch it 20 over have it balanced and new cam bearings installed then rebuild the heads And give it a fresh coat of paint.and than I can swap out my worn out 305.but as always my plans will be put off for a few days while I get rid of some stuff in my shop.

[Zachary17]

Ok so back to my first truck.so back in jun my front brakes started making some moise so what should have been a simple brake job became not so simple.heres what the drivers side brake pad looks like.