|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-10-2017, 06:11 PM
|
#1 |
|
Senior Member
 
Join Date: Sep 2014
Location: Lake Tapps, Wa.
Posts: 674
|
Turn Signal Harness Terminal Part # Help
A little help here please Guys,
I first posted in the Electrical Forum a while back but I still need some help. Without going into all the details ....  I discovered another surprise of shoddy workmanship by my restoration shop from Hell I have a couple of broken wires separated from their crimped terminals on my 1972 C10 Tilt Column Turn Signal Harness. I have gone to NAPA, looked through their catalogue but they were not helpful in identifying this style of terminal. I then called AAW and they have a non OE flat style connector kit but not the crimp terminals separately. I have emailed http://www.repairconnector.com/ and am waiting to see if they have replacement connectors. Again these are the male terminals that snap fit inside the half moon connector on the steering column harness side. Does anyone have a specific reference name or OE part number of this wire terminal? I guess the worst case scenario would be to tear into the column again and replace the turn signal harness for the second time. I appreciate any help to locate some of these. Thanks, Sam |
|
|
|
08-10-2017, 10:17 PM
|
#2 |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,771
|
Re: Turn Signal Harness Terminal Part # Help
-
They are called "Twin Lock Terminals" and are available here. http://www.mouser.com/ProductDetail/...Euq7Cedqnns%3d LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
08-10-2017, 10:45 PM
|
#3 |
|
Senior Member
Join Date: Sep 2014
Location: Lake Tapps, Wa.
Posts: 674
|
Re: Turn Signal Harness Terminal Part # Help
Many thanks LocDoc.
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
