|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-25-2017, 09:39 PM
|
#1 |
|
Registered User
Join Date: Jul 2017
Location: Pea Ridge, Arkansas
Posts: 1
|
1970 C20 differential swap
I have a 1970 C20 with a HO52 diff, I have a 1974 C20 donor truck with a 14 bolt leaf spring set up. Will the differential swap where I can use the leaf springs instead of the coil springs, without major modifications? I have not measured the frame yet. Still have to measure the width of the differential out of the 74 to see what difference's there are. Thoughts
|
|
|
|
08-25-2017, 09:56 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: 1970 C20 differential swap
This is a fairly easy swap either way if you can cut and weld. They sell aftermarket brackets to weld on a donor housing to swap the 14 bolt in place of the HO axle.
Much more difficult to swap to leaf springs.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
08-26-2017, 10:51 AM
|
#3 |
|
Senior Member
  Join Date: Jan 2015
Location: Kearneysville Wv
Posts: 3,955
|
Re: 1970 C20 differential swap
The frame on your 70 is wider than the 74 frame because of the kick outs where the coil springs mount on the frame but a leaf sprung C model 67-72 frames are the same as coil frames if you want to convert it from coils to leafs just get the springs & spring hangers off a leaf sprung truck and bolt on yours you still might have to move the perches on the rear and relocate the shock mounts summit racing sells Currie shock mounts for $17.00 for a pair and they also sell new spring perches
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
