WA Automatic columns, $125ea, shipped

[randy500]

I have 3 used auto columns.
I serviced each of them.
Removed shift bowl, cleaned and lubed shift tube and bowl
Removed center shaft and bearings, cleaned shafts and repacked bearings.
Each is complete with steering wheel nut, washer and turn signal cam.
They each also have the lower bearing tension spring and washer.

Pictures forthcoming.

[randy500]

This one has the high 72 style plastic gear indicator.
Black upper paint over original dark bronze paint?

[randy500]

The one on the left has 67-70 style gear indicator and original tan paint. I didn't try to clean the shift lever because it's not gonna clean up well. Turn signal lever is nice used. Plastic gear indicator window has lots of stress or age cracks but the gear positions are readable.

The one on the right has 72 style high plastic gear indicator and pointer. Some dummy painted it semi-flat black over the original blue paint. The chrome on the shift lever and the turn signal lever is nice used never rusty or pitted.

[randy500]

Ttt

[randy500]

ttt

[Carlos04]

How much for the black column picked up locally?

[randy500]

Originally Posted by Carlos04

How much for the black column picked up locally?

$90. If that works let me know when you want to pick it up, I’m near Tacoma mall.

[Carlos04]

That works for me. Are you free monday afternoon?

[randy500]

Originally Posted by Carlos04

That works for me. Are you free monday afternoon?

That’s good for me, sending you a pm now.

[randy500]

I sold the black column that was originally blue, anybody need one of the others? I have linkage available too, not selling that separate at this time.

[randy500]

One left, the tan one...

[dflarsen77]

I'm looking for just this inner tube that does the shifting. The plate on mine that separates park from revers is completely gone. Do you have one? It's for a 70 non tilt.

[randy500]

Originally Posted by dflarsen77

I'm looking for just this inner tube that does the shifting. The plate on mine that separates park from revers is completely gone. Do you have one? It's for a 70 non tilt.

Those are almost always in about that condition, I don’t have any spares. I have built that up with weld and shaped it out. Have you considered that?

That is caused by the upper shift tube getting dry of lubrication and the bowl sticking to the tube.

I would bet your shift bowl where the tube rides is pretty worn, roger Koop has an nos bowl for sale, $40 was advertised this week.

[randy500]

I have one column left, its tan, not sure which one...