Woodgrian panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jcfcamaro** · 11-07-2017, 03:03 PM

Has anyone restored the woodgrian on a 72 door panel and if so how did you do it? Do they make a sticker or ?

**Jcfcamaro** · 11-08-2017, 10:25 AM

Anyone?

72 Copper C-10 · 11-08-2017, 11:05 AM

I have been told Gary Terry (Cheyenne Superman is his username) does an outstanding job. I haven't used him yet because I'm not quite ready to do so. When the time comes I will defiantly give him a call. I'm not sure how he does it but he would be a good source of information.

John

briank · 11-08-2017, 11:16 AM

I believe some people have had success with the woodgrain drawer liner.....

briank · 11-08-2017, 11:19 AM

Look under k5 builds....post 565 of 1972 k5 attempting my first build..he uses 3m vinyl but I know people who have bought the cheaper vinyl from home depot menards etc that had good luck as well.

52napco · 11-08-2017, 02:37 PM

Repops are available and look fine just make sure you buy the metal ones.

**Jcfcamaro** · 11-08-2017, 04:32 PM

Thanks Guys.

**Dieselwrencher** · 11-08-2017, 06:18 PM

Quote:

Originally Posted by 52napco

Repops are available and look fine just make sure you buy the metal ones.

That's the first time I've heard that. I got some a few years ago for my 72 and they were horrid.

52napco · 11-08-2017, 08:15 PM

Quote:

Originally Posted by Dieselwrencher

That's the first time I've heard that. I got some a few years ago for my 72 and they were horrid.

I've got some on my Blazer and fit and look great...I believe there are 2 different vendors.

**special-K** · 11-08-2017, 08:30 PM

The Truck Shop is one, right? (Orange Co.)

**davischevy** · 11-08-2017, 10:03 PM

I just bought some from https://www.classicparts.com/ that are nice reproductions. I bought some a few years ago that I wasn't proud of.

**Chevyland** · 11-08-2017, 11:26 PM

Quote:

Originally Posted by davischevy

I just bought some from https://www.classicparts.com/ that are nice reproductions. I bought some a few years ago that I wasn't proud of.

I’ve bought these also!
They are a close match to original

El Dorado Jim · 11-08-2017, 10:57 PM

Quote:

Originally Posted by special-K

The Truck Shop is one, right? (Orange Co.)

I just got mine from Truckandcarshops in Orange,Ca they are aluminum and look and fit great

**Dieselwrencher** · 11-08-2017, 11:30 PM

Here is the link I just saved for future reference.

https://www.classicparts.com/1972-Do...ctinfo/19-333/

**special-K** · 11-08-2017, 11:40 PM

They are most likely the same as The Truck Shop. I've had a pair since they came out with them... somewhere around here.

11-07-2017, 03:03 PM	#1
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Woodgrian panels Has anyone restored the woodgrian on a 72 door panel and if so how did you do it? Do they make a sticker or ? Attached Images

11-08-2017, 10:25 AM	#2
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Woodgrian panels Anyone?

11-08-2017, 11:05 AM	#3
72 Copper C-10 Registered User Join Date: Oct 2013 Location: Palisade Colorado Posts: 172	Re: Woodgrian panels I have been told Gary Terry (Cheyenne Superman is his username) does an outstanding job. I haven't used him yet because I'm not quite ready to do so. When the time comes I will defiantly give him a call. I'm not sure how he does it but he would be a good source of information. John

11-08-2017, 11:16 AM	#4
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: Woodgrian panels I believe some people have had success with the woodgrain drawer liner.....

11-08-2017, 11:19 AM	#5
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: Woodgrian panels Look under k5 builds....post 565 of 1972 k5 attempting my first build..he uses 3m vinyl but I know people who have bought the cheaper vinyl from home depot menards etc that had good luck as well.

11-08-2017, 02:37 PM	#6
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: Woodgrian panels Repops are available and look fine just make sure you buy the metal ones.

11-08-2017, 04:32 PM	#7
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Woodgrian panels Thanks Guys.

11-08-2017, 08:30 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Woodgrian panels The Truck Shop is one, right? (Orange Co.) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-08-2017, 10:03 PM	#11
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: Woodgrian panels I just bought some from https://www.classicparts.com/ that are nice reproductions. I bought some a few years ago that I wasn't proud of. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-08-2017, 11:30 PM	#14
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Woodgrian panels Here is the link I just saved for future reference. https://www.classicparts.com/1972-Do...ctinfo/19-333/ __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-08-2017, 11:40 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Woodgrian panels They are most likely the same as The Truck Shop. I've had a pair since they came out with them... somewhere around here. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.