Ideas for what to stand on when working on a truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Arl37 · 11-21-2017, 10:23 AM

Been scratching my head for something to stand on that won't slip while leaning over the fender of a truck or over the the radiator.
You guys must some have some innovative ideas. Please share.

100%Chevy · 11-21-2017, 10:31 AM

I use this adjustable step on my 4 wheel drive trucks and a couple of old pallets work in front of them.

Mike.

westong · 11-21-2017, 10:52 AM

Been thinking about ordering one of these

**A1971Blazer** · 11-22-2017, 08:42 AM

Quote:

Originally Posted by westong

Been thinking about ordering one of these

I bought a Topside creeper a few years ago.....money well spent...it makes working over the top much easier, especially if you have to work at the back of the engine...

**jeffahart** · 11-27-2017, 06:46 PM

Quote:

Originally Posted by 100%Chevy

I use this adjustable step on my 4 wheel drive trucks and a couple of old pallets work in front of them.

Mike.

I have one similar to this, love the heck out of it. Folds up nicely and is a metal traction steps. Easy to adjust and use. I use it all the time.... love it.

6768chevylover · 11-21-2017, 11:19 AM

I have a few cinder blocks laying around. I just use them to stand on..

**FirstOwner69** · 11-21-2017, 11:31 AM

I bought one of these several years ago. It seems well built, is sturdy and has non-skid feet. Just bought another. They are usually under $20 with a "Super Coupon".
https://www.harborfreight.com/step-s...orm-66911.html

1SG.Rob · 11-21-2017, 11:32 AM

I've got an old, smaller step ladder with rubber feet that I use.

67ChevyRedneck · 11-21-2017, 11:38 AM

I have a 16-20" tall plastic tool chest/step thing. Its an old one, I can't find it online anymore. This is the closest i could find (mine looks a lot sturdier)

I'm 5'8 and can't do jack squat under the hood of my 2015 Z71 without it. I can barely reach the dipstick to check the oil without standing on something. Makes me miss my 2000 Z71 a bit more...

demian5 · 11-21-2017, 12:16 PM

I have a wooden 2-step that I made out of 2x4 and 2x6 that works great.

Orange Crate · 11-21-2017, 12:27 PM

https://www.homedepot.com/p/Werner-3...P-20/100662616

harpo231 · 11-21-2017, 12:39 PM

http://67-72chevytrucks.com/vboard/a...1&d=1511282320

BrianG · 11-21-2017, 01:30 PM

Quote:

Originally Posted by Orange Crate

https://www.homedepot.com/p/Werner-3...P-20/100662616

This is what I use and really like it. However, It might be too tall if you were working on a 2wd truck. both my 69 and my 2015 are lifted 4x4's and using this is a must when working under the hood.

Orange Crate · 11-21-2017, 01:34 PM

Quote:

Originally Posted by BrianG

This is what I use and really like it. However, It might be too tall if you were working on a 2wd truck. both my 69 and my 2015 are lifted 4x4's and using this is a must when working under the hood.

Yes, my K20 has a 2" lift and I'm short so.....

Doug's68SS · 11-21-2017, 01:36 PM

Depends on how long you going to be there. I was replacing the intake on my driver and I pulled the front tires and wheels and let it down to where the rotors were about 1/2" off the ground.

hjewell2 · 11-22-2017, 07:22 AM

Quote:

Originally Posted by Doug's68SS

Depends on how long you going to be there. I was replacing the intake on my driver and I pulled the front tires and wheels and let it down to where the rotors were about 1/2" off the ground.

X2 on this one, works great.

**71CHEVYSHORTBED402** · 11-26-2017, 01:09 PM

Quote:

Originally Posted by hjewell2

X2 on this one, works great.

Great point. Speaking for myself, sometimes I get locked in on one perspective (UP) when down is a better option. Especially for something you don't want scratched.

I've always used a sprinkler valve box, just because it's what's available. They work pretty well, especially the 21x15x12.

Deej-79 · 11-22-2017, 12:22 AM

Quote:

Originally Posted by Orange Crate

https://www.homedepot.com/p/Werner-3...P-20/100662616

I've had one of these for about 6 years. Got it on a black Friday at lowes

**raggedjim** · 11-21-2017, 01:32 PM

I climb in there and sit on the fender.

weq92f · 11-21-2017, 02:13 PM

Quote:

Originally Posted by raggedjim

I climb in there and sit on the fender.

Done this a bunch of times!

When that doesn't cut it, I steal my wife's step stool from the kitchen!

-klb

trac209 · 11-21-2017, 01:51 PM

The guy on the ladder in the stairwell is crazy

In The Ten Ring · 11-21-2017, 02:14 PM

Quote:

Originally Posted by trac209

The guy on the ladder in the stairwell is crazy

If you use it right, it'll work fine, but get off balance just enough, and you are dead.

72 tigger · 11-21-2017, 08:36 PM

Quote:

Originally Posted by In The Ten Ring

If you use it right, it'll work fine, but get off balance just enough, and you are dead.

I doubt that any of the warning labels advised against using that way

hjewell2 · 11-26-2017, 04:38 PM

Quote:

Originally Posted by In The Ten Ring

If you use it right, it'll work fine, but get off balance just enough, and you are dead.

instant sweating of the hands when I seen the pic.

tdangle · 11-26-2017, 05:17 PM

I usually use a small step stool, but have had it slip out from under me when reaching to the back of the engine compartment

11-21-2017, 10:23 AM	#1
Arl37 Registered User Join Date: Jul 2011 Location: Valley Center, Ca Posts: 277	Ideas for what to stand on when working on a truck Been scratching my head for something to stand on that won't slip while leaning over the fender of a truck or over the the radiator. You guys must some have some innovative ideas. Please share.

11-21-2017, 10:31 AM	#2
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: Ideas for what to stand on when working on a truck I use this adjustable step on my 4 wheel drive trucks and a couple of old pallets work in front of them. Mike.

11-21-2017, 10:52 AM	#3
westong Registered User Join Date: Feb 2013 Location: Mosier,oregon Posts: 295	Re: Ideas for what to stand on when working on a truck Been thinking about ordering one of these Attached Images

11-21-2017, 11:19 AM	#6
6768chevylover Registered User Join Date: May 2007 Location: nepa Posts: 745	Re: Ideas for what to stand on when working on a truck I have a few cinder blocks laying around. I just use them to stand on..

11-21-2017, 11:31 AM	#7
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Ideas for what to stand on when working on a truck I bought one of these several years ago. It seems well built, is sturdy and has non-skid feet. Just bought another. They are usually under $20 with a "Super Coupon". https://www.harborfreight.com/step-s...orm-66911.html

11-21-2017, 11:32 AM	#8
1SG.Rob Registered User Join Date: May 2017 Location: Vancouver, WA Posts: 87	Re: Ideas for what to stand on when working on a truck I've got an old, smaller step ladder with rubber feet that I use.

11-21-2017, 11:38 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Ideas for what to stand on when working on a truck I have a 16-20" tall plastic tool chest/step thing. Its an old one, I can't find it online anymore. This is the closest i could find (mine looks a lot sturdier) I'm 5'8 and can't do jack squat under the hood of my 2015 Z71 without it. I can barely reach the dipstick to check the oil without standing on something. Makes me miss my 2000 Z71 a bit more... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-21-2017, 12:16 PM	#10
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: Ideas for what to stand on when working on a truck I have a wooden 2-step that I made out of 2x4 and 2x6 that works great. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

11-21-2017, 12:27 PM	#11
Orange Crate Registered User Join Date: Feb 2011 Location: Under the Truck Dreaming Posts: 754	Re: Ideas for what to stand on when working on a truck https://www.homedepot.com/p/Werner-3...P-20/100662616 Attached Images __________________ 72 K20 Custom Camper, D60, 14BFF, full roller 406 TPI w custom built ECU and yes..it has tow hooks...and a 5 speed

11-21-2017, 12:39 PM	#12
harpo231 Registered User Join Date: Nov 2014 Location: Lincoln City DE Posts: 1,292	Re: Ideas for what to stand on when working on a truck http://67-72chevytrucks.com/vboard/a...1&d=1511282320 Attached Images __________________ Stan 67 swb BLU MULE posted via flip-fone

11-21-2017, 01:36 PM	#15
Doug's68SS Registered User Join Date: May 2009 Location: Canton, Tx Posts: 175	Re: Ideas for what to stand on when working on a truck Depends on how long you going to be there. I was replacing the intake on my driver and I pulled the front tires and wheels and let it down to where the rotors were about 1/2" off the ground.

11-21-2017, 01:32 PM	#19
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,502	Re: Ideas for what to stand on when working on a truck I climb in there and sit on the fender. __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

11-21-2017, 01:51 PM	#21
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: Ideas for what to stand on when working on a truck The guy on the ladder in the stairwell is crazy

11-26-2017, 05:17 PM	#25
tdangle Registered User Join Date: Mar 2005 Location: Jurupa Valley, Ca Posts: 1,210	Re: Ideas for what to stand on when working on a truck I usually use a small step stool, but have had it slip out from under me when reaching to the back of the engine compartment __________________ Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.