MI Porterbuilt 1" Narrow Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhornss · 11-22-2017, 03:21 PM

I have a set of V6 Drop Member Air Bag arms for sale that can be used on a factory cross member or a V6 Drop Member. (you will need lower shaft from Porterbuilt) They are new never used. I purchased the V6 drop member and have decided to upgrade to the V7 for engine packaging reasons. The arms were installed during mock up of the front suspension and then removed.
Current value on PB arms is $1100
I am looking to get $950 OBO from the arms.

From the Original Invoice.

Part Number #CA6370-1N-C10-DM6
1" NARROWED CONTROL ARM SET 63-70 C10
DROPMEMBER VERSION 6
UCA-1N-C10
LCA-1N-C10
BJ6370-C10
CA-DM-V6

Longhornss · 11-25-2017, 09:05 AM

ttt

Longhornss · 11-26-2017, 08:54 PM

bump

bbbc10 · 11-26-2017, 10:43 PM

Pics

**lolife99** · 11-27-2017, 01:04 PM

X 2 on posting pics.
Are you saying the uppers AND lowers both have cross shafts so they will work with a stock crossmember?
Or just the uppers?

Longhornss · 11-27-2017, 03:09 PM

Sorry lolife99 the lower arms do not have the shafts but can be ordered form PB.

The other thing I should mention is that the sway bar mount is only tack welded to the lower control arms because when I ordered the arms I was not sure which sway bar I was going to be using, The Porterbuilt bar was not available at the time. This tab is easy enough to have welded solid.

Clearly the Coil over shock does not go with the control arms that was only attached for shock mock up purposes.

Thanks For the interest

Last_Paladin · 11-27-2017, 09:19 PM

Do you know if these move the wheel centerline forward?

Last_Paladin · 11-27-2017, 09:19 PM

If they do, I will take them, if they get to me.

Longhornss · 11-27-2017, 10:01 PM

I cannot say for sure, I know they were designed to work with the extreane drop member and center the wheels.
What is your plan for the arms? Factory crossmember or on a PB drop?

Last_Paladin · 11-29-2017, 02:56 PM

Quote:

Originally Posted by Longhornss

I cannot say for sure, I know they were designed to work with the extreane drop member and center the wheels.
What is your plan for the arms? Factory crossmember or on a PB drop?

Factory crossmember.

Longhornss · 11-29-2017, 04:07 PM

So it looks Like the original Invoice I have is for 1" narrow arms not narrow and forward.

Part Number #CA6370-1N-C10-DM6
1" NARROWED CONTROL ARM SET 63-70 C10
DROPMEMBER VERSION 6
UCA-1N-C10
LCA-1N-C10
BJ6370-C10
CA-DM-V6

Longhornss · 12-02-2017, 03:15 PM

These are still available.
Posted via Mobile Device

Longhornss · 12-12-2017, 10:46 PM

These are still available, I am open to offers.

Longhornss · 01-05-2018, 07:01 PM

New Year New Bump.

ajgriffin · 01-31-2018, 10:15 PM

Still got em?

Longhornss · 01-31-2018, 10:56 PM

Quote:

Originally Posted by ajgriffin

Still got em?

Yes. The arms are still available.
Posted via Mobile Device

Longhornss · 04-21-2018, 05:51 PM

These arms are still available if anyone is interested PM me an offer

11-22-2017, 03:21 PM	#1
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Porterbuilt 1" Narrow Arms I have a set of V6 Drop Member Air Bag arms for sale that can be used on a factory cross member or a V6 Drop Member. (you will need lower shaft from Porterbuilt) They are new never used. I purchased the V6 drop member and have decided to upgrade to the V7 for engine packaging reasons. The arms were installed during mock up of the front suspension and then removed. Current value on PB arms is $1100 I am looking to get $950 OBO from the arms. From the Original Invoice. Part Number #CA6370-1N-C10-DM6 1" NARROWED CONTROL ARM SET 63-70 C10 DROPMEMBER VERSION 6 UCA-1N-C10 LCA-1N-C10 BJ6370-C10 CA-DM-V6 Last edited by Longhornss; 11-29-2017 at 04:08 PM.

11-26-2017, 08:54 PM	#3
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Porterbuilt 1" Narrow Arms bump

11-26-2017, 10:43 PM	#4
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: Porterbuilt 1" Narrow Arms Pics

11-27-2017, 01:04 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt 1" Narrow Arms X 2 on posting pics. Are you saying the uppers AND lowers both have cross shafts so they will work with a stock crossmember? Or just the uppers? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-27-2017, 03:09 PM	#6
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Porterbuilt 1" Narrow Arms Sorry lolife99 the lower arms do not have the shafts but can be ordered form PB. The other thing I should mention is that the sway bar mount is only tack welded to the lower control arms because when I ordered the arms I was not sure which sway bar I was going to be using, The Porterbuilt bar was not available at the time. This tab is easy enough to have welded solid. Clearly the Coil over shock does not go with the control arms that was only attached for shock mock up purposes. Thanks For the interest Attached Images

11-25-2017, 09:05 AM	#2
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	ttt

11-27-2017, 09:19 PM	#7
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: Porterbuilt 1" Narrow Arms Do you know if these move the wheel centerline forward?

11-27-2017, 09:19 PM	#8
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: Porterbuilt 1" Narrow Arms If they do, I will take them, if they get to me.

11-27-2017, 10:01 PM	#9
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Porterbuilt 1" Narrow Arms I cannot say for sure, I know they were designed to work with the extreane drop member and center the wheels. What is your plan for the arms? Factory crossmember or on a PB drop?

11-29-2017, 04:07 PM	#11
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Porterbuilt 1" Narrow Arms So it looks Like the original Invoice I have is for 1" narrow arms not narrow and forward. Part Number #CA6370-1N-C10-DM6 1" NARROWED CONTROL ARM SET 63-70 C10 DROPMEMBER VERSION 6 UCA-1N-C10 LCA-1N-C10 BJ6370-C10 CA-DM-V6

12-02-2017, 03:15 PM	#12
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	These are still available. Posted via Mobile Device

12-12-2017, 10:46 PM	#13
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Porterbuilt 1" Narrow Arms These are still available, I am open to offers.

01-05-2018, 07:01 PM	#14
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Porterbuilt 1" Narrow Arms New Year New Bump.

01-31-2018, 10:15 PM	#15
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: Porterbuilt 1" Narrow Arms Still got em? __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

04-21-2018, 05:51 PM	#17
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Porterbuilt 1" Narrow Arms These arms are still available if anyone is interested PM me an offer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.