Good mark doors?

[Sawlog]

I have some rust coming thru my drivers door on my 6o c10.
Are the Good mark a quality replacement door?
Thanks

[SoCoC10]

I think the issues with them is the bottom rear corners. They don't curve in far enough leaving a gap where the outer rocker and the "B" pillar come together. I think if you test fit them and are willing to massage that area, they are ok.

[In The Ten Ring]

Originally Posted by Sawlog

I have some rust coming thru my drivers door on my 6o c10.
Are the Good mark a quality replacement door?
Thanks

If a person could "massage" their doors they wouldn't need new doors....I'd try www.GMCPauls.com or www.classicheartbeat.com as they are members and stand by their products.

I have this job coming up myself and I am going to hire a local welding body shop to fix my doors via welding.

[Sawlog]

My driver side door has some rust coming thru. A local guy has both doors made by good mark for sale. Brand new, never installed 500 bucks

[harpo231]

Originally Posted by In The Ten Ring

If a person could "massage" their doors they wouldn't need new doors....I'd try www.GMCPauls.com or www.classicheartbeat.com as they are members and stand by their products.

I have this job coming up myself and I am going to hire a local welding body shop to fix my doors via welding.

All doors need massaging ,new , old , even ones that fit before you took them off. If not you got lucky

[718jwh]

I bought a door from GMC Paul don’t remember what brand, did not fit good at all in window hoop and other areas, after lots of back and fourth it was determined the manufacturer claimed the doors were made within specs and I just happen to have a truck that the factory door would not work on. They agreed to take it back but I ate the freight. I bought a nice rust free original door and it fits fine. I think if you want aftermarket doors your going to have to work on them to get to fit, most likely you will have to drill spot welds on window hoop and move it down.