Need A Nice 67-70 Chrome Front Bumper In Dfw Area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 11-02-2003, 12:03 PM

Does anyone have a nice 67-70 chrome front bumper they are willing to part with? I really don't want to buy an aftermarket bumper. Please let me know.

Thanks,

Ernie
smonty46@hotmail.com

chevy_fatman · 11-02-2003, 01:06 PM

Hey Ernie, I think I may have a couple laying around, let me check condition on them, if they're good, you can have one for the cost of shipping. Paul.

smonty · 11-02-2003, 01:12 PM

Hey Paul,

If you have a nice one that would be great! In that case I will just send you the script valve covers.

Ernie

chevy_fatman · 11-02-2003, 01:20 PM

I'll check this evening for you Ernie. Thanks. Paul.

chevy_fatman · 11-02-2003, 06:19 PM

Ernie, bumpers not as good as I thought, the one on top has no dents, just some surface rust from getting wet, the one on the bottom has a couple of dents, good for a beater only.

chevy_fatman · 11-02-2003, 06:19 PM

Left side.

chevy_fatman · 11-02-2003, 06:21 PM

Dent.

If you don't want them that's fine, they'll go to the scrap yard otherwise. Paul.

smonty · 11-02-2003, 10:36 PM

Thanks for the effort and pictures. The bumper is for my 70 stepside which is going to be really nice so I want a really nice chrome front bumper. If you decide you want to buy the 67 fender I have I will toss in the script valve covers (they are straight) which wouldn't add to the shipping. Just let me know. An estimate on shipping via the grey dog is about $40.00.

Thanks again,

Ernie

SWINGSAX68 · 11-02-2003, 11:14 PM

Chevy fat man-
How much to ship the top bumper to 78666 San Marcos TX or may be able to pick up...how much if I pick up....very interested.
-Roger

chevy_fatman · 11-03-2003, 12:40 AM

Not problem Ernie, sorry I couldn't help you, I'll let you know on the fender, I might have a lead on a couple of them locally, I would appreciate pics of the valce covers.

Roger, let me check on shipping on the bumper for ya, I'm located in PA though, shipping I'm guessing would be around 20 bucks, if still interested let me know.

Thanks. Paul.

SWINGSAX68 · 11-03-2003, 01:49 AM

Paul-
yeah.....no chance of me picking up in PA....actually...I have some cousins visiting my dad from PA as we type....what a coincidence.
let me know on shipping..I am still interested.
Can you get pictures of inner part of the bumper....I'm sure its rusty but just to see. It looks pretty straight aside from the rust and such...but I need it for my beater right now so no need for show quality. As long as it isn't twisted. Can you throw in those outer brackets??? That would be cool too. Just the outer ones would be cool and if they are straight. do you need anything I may be able to send you something if you need something I got...just ask...i'll check what I got.
-Roger

SWINGSAX68 · 11-03-2003, 01:54 AM

I am speaking of the top bumper

-Roger

11-02-2003, 12:03 PM	#1
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Need A Nice 67-70 Chrome Front Bumper In Dfw Area Does anyone have a nice 67-70 chrome front bumper they are willing to part with? I really don't want to buy an aftermarket bumper. Please let me know. Thanks, Ernie smonty46@hotmail.com __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-02-2003, 01:12 PM	#3
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to chevy_fatman Hey Paul, If you have a nice one that would be great! In that case I will just send you the script valve covers. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-02-2003, 06:19 PM	#5
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Ernie, bumpers not as good as I thought, the one on top has no dents, just some surface rust from getting wet, the one on the bottom has a couple of dents, good for a beater only. Attached Images

11-02-2003, 06:19 PM	#6
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Left side. Attached Images

11-02-2003, 06:21 PM	#7
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Dent. If you don't want them that's fine, they'll go to the scrap yard otherwise. Paul. Attached Images

11-02-2003, 01:06 PM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Hey Ernie, I think I may have a couple laying around, let me check condition on them, if they're good, you can have one for the cost of shipping. Paul.

11-02-2003, 01:20 PM	#4
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	I'll check this evening for you Ernie. Thanks. Paul.

11-02-2003, 10:36 PM	#8
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to chevy_fatman Thanks for the effort and pictures. The bumper is for my 70 stepside which is going to be really nice so I want a really nice chrome front bumper. If you decide you want to buy the 67 fender I have I will toss in the script valve covers (they are straight) which wouldn't add to the shipping. Just let me know. An estimate on shipping via the grey dog is about $40.00. Thanks again, Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-02-2003, 11:14 PM	#9
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	Chevy fat man- How much to ship the top bumper to 78666 San Marcos TX or may be able to pick up...how much if I pick up....very interested. -Roger __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

11-03-2003, 12:40 AM	#10
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Not problem Ernie, sorry I couldn't help you, I'll let you know on the fender, I might have a lead on a couple of them locally, I would appreciate pics of the valce covers. Roger, let me check on shipping on the bumper for ya, I'm located in PA though, shipping I'm guessing would be around 20 bucks, if still interested let me know. Thanks. Paul.

11-03-2003, 01:49 AM	#11
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	Paul- yeah.....no chance of me picking up in PA....actually...I have some cousins visiting my dad from PA as we type....what a coincidence. let me know on shipping..I am still interested. Can you get pictures of inner part of the bumper....I'm sure its rusty but just to see. It looks pretty straight aside from the rust and such...but I need it for my beater right now so no need for show quality. As long as it isn't twisted. Can you throw in those outer brackets??? That would be cool too. Just the outer ones would be cool and if they are straight. do you need anything I may be able to send you something if you need something I got...just ask...i'll check what I got. -Roger __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

11-03-2003, 01:54 AM	#12
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	I am speaking of the top bumper -Roger __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.