I broke this, now how do I fix it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedRider · 02-16-2018, 03:07 PM

I just finished replacing the body mounts as well as the radiator mounts, and somewhere along the way I must've snapped this on this lower driver-side fender:

Here's the area backed out (not my truck, only for reference):

Looks like there's a couple bolts nearby, does this come off so I can bolt on a new one? Or do I need to break out the welder, or buy a new fender?

**Jcfcamaro** · 02-16-2018, 03:23 PM

Have to weld it back together. Good thing is you have the other half.

88fordf150 · 02-16-2018, 05:19 PM

You can buy those new.

sprint_9 · 02-16-2018, 07:02 PM

That floor/fender support looks like a can of worms about to open.

That is all supposed to be lapped together with the piece 88fordf150 posted. And it looks like your missing that piece.

RedRider · 02-16-2018, 10:24 PM

Thanks for the info everyone. Looks like I can take off the existing support and weld it back, or buy a new one.

Quote:

Originally Posted by sprint_9

That floor/fender support looks like a can of worms about to open. That is all supposed to be lapped together with the piece 88fordf150 posted. And it looks like your missing that piece.

Can of worms, as in a rusty can of worms? I’ll save that for another thread. I don’t see any missing pieces, just broken ones...am I missing something?

sprint_9 · 02-17-2018, 01:45 AM

Quote:

Originally Posted by RedRider

Can of worms, as in a rusty can of worms? I’ll save that for another thread. I don’t see any missing pieces, just broken ones...am I missing something?

Earlier cabs might not have had that brace, 88fordf150 posted a picture of it. I would add that brace if you dont have one on there now. It bolts onto the two bolts and then is spot or plug welded around the fender bolt hole. It stiffens that mount up quite a bit.

Orange67 · 02-16-2018, 07:11 PM

Yikes. That makes me nervous about replacing my body bushings. Good luck man.

sick472 · 02-19-2018, 09:45 AM

I recently found these two pieces in a box of parts and wondered where they originally came from so Red's thread is perfect timing, BUT, once again, for some reason, I can't see the posted pictures (just a square and "X"). At any rate, where do they go? exactly?

RedRider · 03-10-2018, 10:50 PM

Quote:

Originally Posted by sick472

I recently found these two pieces in a box of parts and wondered where they originally came from so Red's thread is perfect timing, BUT, once again, for some reason, I can't see the posted pictures (just a square and "X"). At any rate, where do they go? exactly?

Bump. Anyone have pics of how that lower fender brace mounts up?

02-16-2018, 03:07 PM	#1
RedRider Registered User Join Date: Jan 2016 Location: Poway, CA Posts: 356	I broke this, now how do I fix it? I just finished replacing the body mounts as well as the radiator mounts, and somewhere along the way I must've snapped this on this lower driver-side fender: Here's the area backed out (not my truck, only for reference): Looks like there's a couple bolts nearby, does this come off so I can bolt on a new one? Or do I need to break out the welder, or buy a new fender? __________________ 1970 C-10 "Old Yeller"

02-16-2018, 03:23 PM	#2
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: I broke this, now how do I fix it? Have to weld it back together. Good thing is you have the other half.

02-16-2018, 05:19 PM	#3
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: I broke this, now how do I fix it? You can buy those new. Attached Images __________________ Brad handshoe

02-16-2018, 07:02 PM	#4
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: I broke this, now how do I fix it? That floor/fender support looks like a can of worms about to open. That is all supposed to be lapped together with the piece 88fordf150 posted. And it looks like your missing that piece.

02-16-2018, 07:11 PM	#7
Orange67 Registered User Join Date: Mar 2013 Location: Syracuse, Utah Posts: 499	Re: I broke this, now how do I fix it? Yikes. That makes me nervous about replacing my body bushings. Good luck man. __________________ Justin '67 C20 CST Custom Camper '04.5 LLY Duramax CCSB...sold

02-19-2018, 09:45 AM	#8
sick472 Registered User Join Date: Jul 2015 Location: Sedalia Mo. Posts: 1,131	Re: I broke this, now how do I fix it? I recently found these two pieces in a box of parts and wondered where they originally came from so Red's thread is perfect timing, BUT, once again, for some reason, I can't see the posted pictures (just a square and "X"). At any rate, where do they go? exactly? __________________ He who is without oil shall throw the first rod. Compressions 8.7:1 1972 C10 1976 C10 (parts truck) 1985 K20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.