Equus 3-3/8 Inch Tachometer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lutronjim · 02-20-2018, 02:58 PM

Anyone happen to know if the Equus 3-3/8 Inch Tachometer
Part #: 6088 Line: EQU will work with LS. It has capability to flush mount and can be set to 4 cylinder. My connect and cruise package has a wire to drive a tach.

Thanks

BR3W CITY · 02-20-2018, 11:33 PM

It should. Some tach's need a pullup resistor to properly display the readings. I believe there was a thread a long while back with resistor values if needed. I used a resistor on my swap when I originally did it.

02-20-2018, 02:58 PM	#1
lutronjim Registered User Join Date: Dec 2013 Location: Dunwoody,Ga Posts: 443	Equus 3-3/8 Inch Tachometer Anyone happen to know if the Equus 3-3/8 Inch Tachometer Part #: 6088 Line: EQU will work with LS. It has capability to flush mount and can be set to 4 cylinder. My connect and cruise package has a wire to drive a tach. Thanks

02-20-2018, 11:33 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Equus 3-3/8 Inch Tachometer It should. Some tach's need a pullup resistor to properly display the readings. I believe there was a thread a long while back with resistor values if needed. I used a resistor on my swap when I originally did it. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.