Turbo log manifold question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tmills213 · 03-17-2018, 10:26 PM

Should there be any concern about having the primaries straight out like this?? I started with elbow and it was a compound angle PITA. I see the dirty dingo ($$$$) log as the only reference which used straight primaries... will I be fine.

pipe is 1.5 and 2.5" sched 40

davepl · 03-18-2018, 12:24 PM

It's not ideal, but it won't cause any problem that I can think of. I mean old iron log manifolds aren't that much better internally sometimes.

BR3W CITY · 03-18-2018, 12:46 PM

Can you just set the log back a little bit and set the primaries on a low angle? What you want to avoid is the air getting forced out directly into the wall of the tube at a 90* angle.

tmills213 · 03-19-2018, 02:01 PM

when I started with the elbows, the elbow was getting so short compared the to the ID that it was essentially straight. I am also basing my judgments off others i see. does that make it right. no. sigh. I wish i wasn't so cheap

AZ 67 C10 · 03-20-2018, 09:42 PM

Turbulence in your manifolds is a big part of how efficient your turbo is. What you have will work but isn't ideal

03-17-2018, 10:26 PM	#1
tmills213 Registered User Join Date: Jan 2011 Location: Normal il Posts: 173	Turbo log manifold question Should there be any concern about having the primaries straight out like this?? I started with elbow and it was a compound angle PITA. I see the dirty dingo ($$$$) log as the only reference which used straight primaries... will I be fine. pipe is 1.5 and 2.5" sched 40 Attached Images

03-18-2018, 12:24 PM	#2
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Turbo log manifold question It's not ideal, but it won't cause any problem that I can think of. I mean old iron log manifolds aren't that much better internally sometimes. __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

03-18-2018, 12:46 PM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Turbo log manifold question Can you just set the log back a little bit and set the primaries on a low angle? What you want to avoid is the air getting forced out directly into the wall of the tube at a 90* angle. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

03-19-2018, 02:01 PM	#4
tmills213 Registered User Join Date: Jan 2011 Location: Normal il Posts: 173	Re: Turbo log manifold question when I started with the elbows, the elbow was getting so short compared the to the ID that it was essentially straight. I am also basing my judgments off others i see. does that make it right. no. sigh. I wish i wasn't so cheap Attached Images

03-20-2018, 09:42 PM	#5
AZ 67 C10 Registered User Join Date: May 2017 Location: Goodyear, AZ Posts: 70	Re: Turbo log manifold question Turbulence in your manifolds is a big part of how efficient your turbo is. What you have will work but isn't ideal



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.