2017 engine in an 84 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chris1htx · 03-19-2018, 11:19 AM

I came across a 2017 5.3, looking to installing it in my 84. How difficult is a swap like this? Any good builds to use as a guideline?

**mongocanfly** · 03-19-2018, 01:02 PM

difficulty wise its not that bad...not much different than swapping in a smallblock....not sure on the 17s motor mounts....my suggestion is read all you can....most swaps differ a little from owner to owner....

**Clyde65** · 03-19-2018, 06:45 PM

The 2014 and up have electronic steering, vacuum pump and the tuning needs to be done by someone who knows what their doing.

There are kits to buy for power steering options and the headers are not cheap( BRP hot rods)
These are NOT easy like an LS!

chris1htx · 03-19-2018, 09:12 PM

Thanks for the info guys. Looks like I have a big project on my hands.

**mongocanfly** · 03-19-2018, 09:40 PM

yep ...I didn't realize so much had changed to the newer engines......

chris1htx · 03-23-2018, 03:31 PM

What are you guys doing for fuel? Is it the same concept as an LS swap?

What about the radiator? I’ve read to get a 454 radiator, but do I have to get one specifically for a swap or just a regular c10 radiator?

Low Elco · 04-02-2018, 12:43 PM

Look hard.... there's a guy on here doing on e I think in a square. He's making all kinds of cool stuff for his.

cornerstone · 04-02-2018, 04:48 PM

Look into these members posts... 87chevy.com ,aboesec10, and Vannatta20. Also look on youtube for L83 swap.

vannatta20 · 05-13-2018, 10:19 PM

It is not much more difficult than a standard swap. I do them quite a bit. You will need the Holley oil pan. I keep the stock accessory drive to keep costs down. For steering I now use a electric power steering pump that provides power to the factory great box. I have the 454 radiator and it is huge. The standard will cool fine. I can covert the harnesses for plug and play. The programming is tricky but I can help with that as well.

**Clyde65** · 05-18-2018, 07:54 PM

Also worth noting, the gauges are Can bus only, not cheap!!

vannatta20 · 05-19-2018, 12:41 AM

Here is a cool solution to the can bus issues. Dakota digital makes a module for 100$ that outputs a vss signal and tach signal

Dakota Digital OBD II Tachometer/Speedometer Interfaces STA-1000

03-19-2018, 11:19 AM	#1
chris1htx Registered User Join Date: Jan 2013 Location: Houston, TX Posts: 178	2017 engine in an 84 I came across a 2017 5.3, looking to installing it in my 84. How difficult is a swap like this? Any good builds to use as a guideline?

03-19-2018, 01:02 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: 2017 engine in an 84 difficulty wise its not that bad...not much different than swapping in a smallblock....not sure on the 17s motor mounts....my suggestion is read all you can....most swaps differ a little from owner to owner.... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

03-19-2018, 06:45 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 2017 engine in an 84 The 2014 and up have electronic steering, vacuum pump and the tuning needs to be done by someone who knows what their doing. There are kits to buy for power steering options and the headers are not cheap( BRP hot rods) These are NOT easy like an LS! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-19-2018, 09:12 PM	#4
chris1htx Registered User Join Date: Jan 2013 Location: Houston, TX Posts: 178	Re: 2017 engine in an 84 Thanks for the info guys. Looks like I have a big project on my hands.

03-19-2018, 09:40 PM	#5
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: 2017 engine in an 84 yep ...I didn't realize so much had changed to the newer engines...... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

03-23-2018, 03:31 PM	#6
chris1htx Registered User Join Date: Jan 2013 Location: Houston, TX Posts: 178	Re: 2017 engine in an 84 What are you guys doing for fuel? Is it the same concept as an LS swap? What about the radiator? I’ve read to get a 454 radiator, but do I have to get one specifically for a swap or just a regular c10 radiator?

04-02-2018, 12:43 PM	#7
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 2017 engine in an 84 Look hard.... there's a guy on here doing on e I think in a square. He's making all kinds of cool stuff for his. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

04-02-2018, 04:48 PM	#8
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: 2017 engine in an 84 Look into these members posts... 87chevy.com ,aboesec10, and Vannatta20. Also look on youtube for L83 swap.

05-13-2018, 10:19 PM	#9
vannatta20 Registered User Join Date: Oct 2011 Location: Las Vegas, NV Posts: 291	Re: 2017 engine in an 84 It is not much more difficult than a standard swap. I do them quite a bit. You will need the Holley oil pan. I keep the stock accessory drive to keep costs down. For steering I now use a electric power steering pump that provides power to the factory great box. I have the 454 radiator and it is huge. The standard will cool fine. I can covert the harnesses for plug and play. The programming is tricky but I can help with that as well.

05-18-2018, 07:54 PM	#10
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 2017 engine in an 84 Also worth noting, the gauges are Can bus only, not cheap!! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

05-19-2018, 12:41 AM	#11
vannatta20 Registered User Join Date: Oct 2011 Location: Las Vegas, NV Posts: 291	Re: 2017 engine in an 84 Here is a cool solution to the can bus issues. Dakota digital makes a module for 100$ that outputs a vss signal and tach signal Dakota Digital OBD II Tachometer/Speedometer Interfaces STA-1000



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.