NC Inline 6 and 3 Speed Trans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Graham57a** · 03-19-2018, 11:04 PM

I have a 250 straight 6 that came in my 68 gmc along with the factory 3 speed trans. I am converting to a small block with a 700r4 so I am ready to sell all of the extra parts that I won’t be needing. I would prefer to keep the trans as a separate item and the straight 6 as a complete item. If I don’t get any hits I will consider parting out. I will also have the shift linkage, steering column, etc that I won’t be using. The motor runs, I’ve had it running but it needs some tuning. Truck is believed to have 105k miles so it’s not completely hammered. PayPal is preferred, buyer covers the fees. First one to say “I’ll take it” gets it.

Asking $200 for the motor, $150 for the trans, or $300 for the combo. If you have any interest in other parts post below and I will get pics and a price

**mikesjaarda** · 03-20-2018, 07:17 AM

Interested in the 2 shift linkage rods. How much shipped to 49418?

**Graham57a** · 03-25-2018, 05:48 PM

Quote:

Originally Posted by mikesjaarda

Interested in the 2 shift linkage rods. How much shipped to 49418?

I’ll get pics and shipping quote tomorrow. How does $80 plus shipping sound?

**mikesjaarda** · 03-28-2018, 11:37 AM

I could go 65 shipped.

**Graham57a** · 09-04-2018, 08:53 AM

Bump on this thread, everything is still complete

**1970 CST Short Wide** · 09-06-2018, 02:15 PM

Will you sell Just the Clutch pedal, don’t need any of the brake part Just the Clutch pedal
If so how much shipped to 94565

**1970 CST Short Wide** · 09-07-2018, 07:20 PM

Ttt

**Graham57a** · 09-07-2018, 07:55 PM

Quote:

Originally Posted by 1970 CST Short Wide

Ttt

Sorry I’m out of town, will get you a shipping quote early next week

**1970 CST Short Wide** · 09-07-2018, 09:58 PM

Quote:

Originally Posted by Graham57a

Sorry I’m out of town, will get you a shipping quote early next week

Thanks, Hope being out of town is for Fun
Steve

**1970 CST Short Wide** · 09-09-2018, 11:16 AM

Bump

**Graham57a** · 09-09-2018, 05:38 PM

Quote:

Originally Posted by 1970 CST Short Wide

Bump

Just got home, is this all you need?

**1970 CST Short Wide** · 09-09-2018, 11:04 PM

Quote:

Originally Posted by Graham57a

Just got home, is this all you need?

Yes yes yes. How much shipped to 94565 and do you take PayPal
Thanks Steve

**Graham57a** · 09-10-2018, 07:23 AM

Quote:

Originally Posted by 1970 CST Short Wide

Yes yes yes. How much shipped to 94565 and do you take PayPal
Thanks Steve

$40 shipped, I’m thinking $15 in shipping cost due to the awkward size. PayPal is Graham57a@yahoo.com. Please cover the fees if using PayPal

**1970 CST Short Wide** · 09-10-2018, 09:49 AM

Quote:

Originally Posted by Graham57a

$40 shipped, I’m thinking $15 in shipping cost due to the awkward size. PayPal is Graham57a@yahoo.com. Please cover the fees if using PayPal

Do you have the braket for the end to connect the rod?
PayPal being sent now
Thanks
Steve

GreenBay1921 · 09-20-2018, 06:18 PM

Any pics of the tranny? Muncie or Saginaw? LWB or SWB?

**Graham57a** · 09-20-2018, 09:15 PM

Quote:

Originally Posted by GreenBay1921

Any pics of the tranny? Muncie or Saginaw? LWB or SWB?

I can get some pics, it’s a Saginaw, truck is swb

**Graham57a** · 09-24-2018, 07:11 PM

Pics of trans

sfcharr · 05-01-2019, 02:59 PM

Are the shifter rods available?

Dawgy · 05-02-2019, 06:13 PM

I know this is an old thread. But.
Do you happen to have the Bracket and Two Bolts that hold the Z Bar.
It's shaped something like a U.
Don't know if you started parting out the motor or not.
Thank You!
Don

Dawgy · 05-10-2019, 07:19 PM

Text and PM sent

CST10 · 04-24-2019, 09:40 PM

If you start parting out the motor, I’d be interested in the intake/exhaust/carburetor/air cleaner assembly and a few other small items.

CST10 · 04-24-2019, 09:42 PM

If I was closer, I’d pick up the motor and transmission. Don’t have a clue what shipping would run to 70737.

**R Jackson** · 05-13-2019, 07:56 PM

I am interested in fuel pump to carb gas line.

23window · 05-13-2019, 09:45 PM

Would you please quote the trans plus shipping to 74145?
Thank you

03-19-2018, 11:04 PM	#1
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,865	Inline 6 and 3 Speed Trans I have a 250 straight 6 that came in my 68 gmc along with the factory 3 speed trans. I am converting to a small block with a 700r4 so I am ready to sell all of the extra parts that I won’t be needing. I would prefer to keep the trans as a separate item and the straight 6 as a complete item. If I don’t get any hits I will consider parting out. I will also have the shift linkage, steering column, etc that I won’t be using. The motor runs, I’ve had it running but it needs some tuning. Truck is believed to have 105k miles so it’s not completely hammered. PayPal is preferred, buyer covers the fees. First one to say “I’ll take it” gets it. Asking $200 for the motor, $150 for the trans, or $300 for the combo. If you have any interest in other parts post below and I will get pics and a price Attached Images __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788 Last edited by Graham57a; 09-05-2018 at 09:03 PM.

03-20-2018, 07:17 AM	#2
mikesjaarda Junior Member Join Date: Aug 2016 Location: grandville, michigan Posts: 26	Re: Inline 6 and 3 Speed Trans Interested in the 2 shift linkage rods. How much shipped to 49418?

03-28-2018, 11:37 AM	#4
mikesjaarda Junior Member Join Date: Aug 2016 Location: grandville, michigan Posts: 26	Re: Inline 6 and 3 Speed Trans I could go 65 shipped.

09-04-2018, 08:53 AM	#5
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,865	Re: Inline 6 and 3 Speed Trans Bump on this thread, everything is still complete __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

09-06-2018, 02:15 PM	#6
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,196	Re: Inline 6 and 3 Speed Trans Will you sell Just the Clutch pedal, don’t need any of the brake part Just the Clutch pedal If so how much shipped to 94565 __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-07-2018, 07:20 PM	#7
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,196	Re: Inline 6 and 3 Speed Trans Ttt __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-09-2018, 11:16 AM	#10
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,196	Re: Inline 6 and 3 Speed Trans Bump __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-20-2018, 06:18 PM	#15
GreenBay1921 Registered User Join Date: Dec 2014 Location: McDonough, Ga Posts: 87	Re: Inline 6 and 3 Speed Trans Any pics of the tranny? Muncie or Saginaw? LWB or SWB? __________________ '68 Chevy C10 '06 Saleen Mustang #725 (Convertible) '04 Infiniti G35 '01 Infiniti QX4

09-24-2018, 07:11 PM	#17
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,865	Re: Inline 6 and 3 Speed Trans Pics of trans Attached Images __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

05-01-2019, 02:59 PM	#18
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: Inline 6 and 3 Speed Trans Are the shifter rods available?

05-02-2019, 06:13 PM	#19
Dawgy Registered User Join Date: May 2018 Location: Decatur,Al Posts: 24	Re: Inline 6 and 3 Speed Trans I know this is an old thread. But. Do you happen to have the Bracket and Two Bolts that hold the Z Bar. It's shaped something like a U. Don't know if you started parting out the motor or not. Thank You! Don

05-10-2019, 07:19 PM	#20
Dawgy Registered User Join Date: May 2018 Location: Decatur,Al Posts: 24	Re: Inline 6 and 3 Speed Trans Text and PM sent

04-24-2019, 09:40 PM	#21
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Inline 6 and 3 Speed Trans If you start parting out the motor, I’d be interested in the intake/exhaust/carburetor/air cleaner assembly and a few other small items. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

04-24-2019, 09:42 PM	#22
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Inline 6 and 3 Speed Trans If I was closer, I’d pick up the motor and transmission. Don’t have a clue what shipping would run to 70737. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

05-13-2019, 07:56 PM	#23
R Jackson Junior Member Join Date: Oct 2017 Location: Clear Brook Posts: 49	Re: Inline 6 and 3 Speed Trans I am interested in fuel pump to carb gas line.



Register or Log In To remove these advertisements.

05-13-2019, 09:45 PM	#24
23window Registered User Join Date: Mar 2008 Location: Tulsa, OK Posts: 20	Re: Inline 6 and 3 Speed Trans Would you please quote the trans plus shipping to 74145? Thank you

Register or Log In To remove these advertisements.