NV ISO: big back window conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

turbobrick · 03-22-2018, 03:25 PM

I'm looking for one of Scott's big back window kits. I haven't been able to get in touch with him to order one. So, I was just looking to see if maybe someone had an unused one sitting around. Thanks in advance.

shortstep60 · 03-22-2018, 04:43 PM

I no a guy on the forum that tried to call him and because he wanted one and he never called him back. I have some that I would sale one with speaker holes cut in the side easy fix $350,00 I have another one that nice I would sale for $450.00 I have more but I need them for some other trucks that I am building. Shipping is high because it takes a big box to ship them in thanks

turbobrick · 03-22-2018, 04:47 PM

Quote:

Originally Posted by shortstep60

I no a guy on the forum that tried to call him and because he wanted one and he never called him back. I have some that I would sale one with speaker holes cut in the side easy fix $350,00 I have another one that nice I would sale for $450.00 I have more but I need them for some other trucks that I am building. Shipping is high because it takes a big box to ship them in thanks

Thanks for the reply. I have a BBW cab I can cut one out of, but I'm really looking for someone that might have one of Scott's kits that they haven't used yet.

**vetnat** · 03-23-2018, 12:31 AM

I was in-line for one of the kits (I did get Scott on the telephone about a year ago, he said he had a 2 to 3 year waiting list). Since then, I have scored a BBW cab and removed the inside panel. I am happy

It wasn't that bad removing the panel, just tedious, lots of spot welds to drill out.

turbobrick · 03-23-2018, 01:07 AM

Quote:

Originally Posted by vetnat

I was in-line for one of the kits (I did get Scott on the telephone about a year ago, he said he had a 2 to 3 year waiting list). Since then, I have scored a BBW cab and removed the inside panel. I am happy

It wasn't that bad removing the panel, just tedious, lots of spot welds to drill out.

Thanks for the awesome info, that really helps. I was thinking that the panel from my cab might be a better choice after reading a write up about it. I actually think I could do it too. I'd be tempted if somebody had a kit though.

**nsb29** · 03-23-2018, 08:15 AM

I did a big back window conversion on my 65 the hardest part was the upper seem I used the panel adhesive/epoxy because you cannot get to it to weld it I think it makes a much cleaner looking install and from what I have seen easier than the Kit that I saw which would take a lot of bodywork

03-22-2018, 03:25 PM	#1
turbobrick Registered User Join Date: Dec 2017 Location: Carson City Posts: 11	ISO: big back window conversion I'm looking for one of Scott's big back window kits. I haven't been able to get in touch with him to order one. So, I was just looking to see if maybe someone had an unused one sitting around. Thanks in advance.

03-22-2018, 04:43 PM	#2
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: ISO: big back window conversion I no a guy on the forum that tried to call him and because he wanted one and he never called him back. I have some that I would sale one with speaker holes cut in the side easy fix $350,00 I have another one that nice I would sale for $450.00 I have more but I need them for some other trucks that I am building. Shipping is high because it takes a big box to ship them in thanks

03-23-2018, 12:31 AM	#4
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: ISO: big back window conversion I was in-line for one of the kits (I did get Scott on the telephone about a year ago, he said he had a 2 to 3 year waiting list). Since then, I have scored a BBW cab and removed the inside panel. I am happy It wasn't that bad removing the panel, just tedious, lots of spot welds to drill out. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

03-23-2018, 08:15 AM	#6
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: ISO: big back window conversion I did a big back window conversion on my 65 the hardest part was the upper seem I used the panel adhesive/epoxy because you cannot get to it to weld it I think it makes a much cleaner looking install and from what I have seen easier than the Kit that I saw which would take a lot of bodywork



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.