|
|
|
04-01-2018, 07:12 PM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Ramp Winch
Ok so here is what I did.
Ran cable from truck battery to 12 volt contactor. It operates on 12 volts and is good for 400amp cont use. Then from there to 2-6 volt batteries. I ran the ground back under the truck to the frame mounted bed. I ran a lighted switch to the dash to turn the charge on/off. Just need a 12 volt gauge to keep a eye on it when charging. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
04-01-2018, 07:44 PM
|
#2 |
|
Registered User
Join Date: Jan 2018
Location: TN
Posts: 104
|
Re: Ramp Winch
Looks good. I would consider putting a cover over the terminals on the contactor....just for insurance.
__________________
1969 C10 Suburban Custom (Factory 396/TH400, survivor with no rust) |
|
|
|
|
04-01-2018, 08:00 PM
|
#3 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Ramp Winch
Quote:
Yea and one over the tops of the batteries also I think probably. To keep the water off the terminals.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
04-01-2018, 08:17 PM
|
#4 |
|
Registered User
Join Date: Jan 2018
Location: TN
Posts: 104
|
Re: Ramp Winch
Or you know keep something from shorting to the frame. I can see from the quality of workmanship you are the kind of guy that thinks through the job before you start. Cheers.
__________________
1969 C10 Suburban Custom (Factory 396/TH400, survivor with no rust) |
|
|
|
|
04-01-2018, 09:31 PM
|
#5 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Ramp Winch
Quote:
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
