GA WTB Tail pipe hangar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Wgesnerjr** · 04-12-2018, 02:08 PM

Looking to see if anyone has one of these tail pipe hangar brackets. It is on the frame rail by the spare tire area. I have the standard one that is riveted on the drivers side. I am looking for a match for the passenger side.(RH) May have only been available on diesel models.
Please let me know,
Jay

**Wgesnerjr** · 04-12-2018, 03:42 PM

I am looking for part Y.

GM72K10 · 04-13-2018, 06:13 AM

New or used? GM part number is 14034504. Came with all Military CUCV pickups.

**Wgesnerjr** · 04-13-2018, 06:23 AM

googling the part number shows discontinued.
I have done a frame off resto and wanted the best looking hangar set up. I know the muffler shop will use generic hangers so I'm trying to get these in place before I take the truck to them.

GM72K10 · 04-13-2018, 10:48 AM

Have a nice used one if your interested
$20 plus the ride

GonicGM · 04-15-2018, 04:29 PM

All models in diesel have duals, Blazer Jimmy Suburban, Truck, 4x4, 4x2, 1/2 ton, 3/4 ton, 1 ton. There are multiple hangers to suit all these applications.

I may have.

I see your vehicle listed in your signature. Maybe that's what it is for. I don't know.

You should certainly specify your application to get the exact correct part or even one close. There are sooooo many exhaust systems and relative hardware.

**Wgesnerjr** · 04-16-2018, 09:25 AM

Thanks GM72K10,
I looked at my frame and I don't seem to have the holes to mount that one. (see pic, sorry it's sideways) Also, it looks very long in comparison to the stock one on the drivers side. What is the overall measurement?? I would like to see if it matches mine. Maybe the picture is deceiving.

GonicGM,
Yes, it is for the one in my signature. 1985 Custom Deluxe, Standard Cab, 2WD Long bed. It is a former 305, 4BBL, 700R4, single exhaust truck. Now 5.3 LS, 4L60E, will have true duals with cats.

The original set up had a 2 into 1 head pipe, 1 catalytic conv, muffler and tailpipe on the drivers side. The rear most hanger is still present and riveted to the frame. (see pic, before sandblasting and paint) I'm pretty sure that ALL the gas trucks had the exhaust running down the drivers side due to the cat, so there may not be a match.

I see that the diesels had hangars on the passenger side; I just don't know if any model would have a match to my drivers side. If not, I can just let the exhaust shop "create" their own for the passenger side. Just thought if there is anything to match and I could get a hold of, it would look better than universal stuff.

I thought about getting a matching set of Diesels ones, but my frame is painted now and I don't want to grind the rivets off at this point. I can get some measurement when I get home today. Maybe that will help.

GM72K10 · 04-17-2018, 06:18 AM

Quote:

Originally Posted by GM72K10

Have a nice used one if your interested
$20 plus the ride

The hanger pictured is off a K30 CUCV diesel pickup.

GonicGM · 04-28-2018, 08:16 AM

Guy in NH parting 87 K10 diesel. He has a RH on it. Contact him Kurt six zero three seven three eight eight zero one seven. Truck is rotted and fully stripped but I saw that hanger on it Sunday, took image.

04-12-2018, 02:08 PM	#1
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	WTB Tail pipe hangar Looking to see if anyone has one of these tail pipe hangar brackets. It is on the frame rail by the spare tire area. I have the standard one that is riveted on the drivers side. I am looking for a match for the passenger side.(RH) May have only been available on diesel models. Please let me know, Jay Attached Images __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

04-12-2018, 03:42 PM	#2
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: WTB Tail pipe hangar I am looking for part Y. Attached Images __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

04-13-2018, 06:13 AM	#3
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: WTB Tail pipe hangar New or used? GM part number is 14034504. Came with all Military CUCV pickups. __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

04-13-2018, 06:23 AM	#4
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: WTB Tail pipe hangar googling the part number shows discontinued. I have done a frame off resto and wanted the best looking hangar set up. I know the muffler shop will use generic hangers so I'm trying to get these in place before I take the truck to them. __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

04-13-2018, 10:48 AM	#5
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: WTB Tail pipe hangar Have a nice used one if your interested $20 plus the ride Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

04-15-2018, 04:29 PM	#6
GonicGM Registered User Join Date: Mar 2014 Location: Rochester, NH Posts: 168	Re: WTB Tail pipe hangar All models in diesel have duals, Blazer Jimmy Suburban, Truck, 4x4, 4x2, 1/2 ton, 3/4 ton, 1 ton. There are multiple hangers to suit all these applications. I may have. I see your vehicle listed in your signature. Maybe that's what it is for. I don't know. You should certainly specify your application to get the exact correct part or even one close. There are sooooo many exhaust systems and relative hardware. __________________ 83 K30 SRW 350 TH400 NP205 4.10 9' Fisher 85 K30 SRW 350 TH400 NP205 4.10 87 V3500 Dually 454 TBI SM465 NP205 4.10 9' Fisher 83 K2500 350 TH700R4 8600GVW Dual Tank 4.10 1973 Cheyenne Super 30 DRW Std Cab Z83 4.10 1976 Silverado C30 Std Cab 4.10 DRW (4 sale)

04-16-2018, 09:25 AM	#7
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: WTB Tail pipe hangar Thanks GM72K10, I looked at my frame and I don't seem to have the holes to mount that one. (see pic, sorry it's sideways) Also, it looks very long in comparison to the stock one on the drivers side. What is the overall measurement?? I would like to see if it matches mine. Maybe the picture is deceiving. GonicGM, Yes, it is for the one in my signature. 1985 Custom Deluxe, Standard Cab, 2WD Long bed. It is a former 305, 4BBL, 700R4, single exhaust truck. Now 5.3 LS, 4L60E, will have true duals with cats. The original set up had a 2 into 1 head pipe, 1 catalytic conv, muffler and tailpipe on the drivers side. The rear most hanger is still present and riveted to the frame. (see pic, before sandblasting and paint) I'm pretty sure that ALL the gas trucks had the exhaust running down the drivers side due to the cat, so there may not be a match. I see that the diesels had hangars on the passenger side; I just don't know if any model would have a match to my drivers side. If not, I can just let the exhaust shop "create" their own for the passenger side. Just thought if there is anything to match and I could get a hold of, it would look better than universal stuff. I thought about getting a matching set of Diesels ones, but my frame is painted now and I don't want to grind the rivets off at this point. I can get some measurement when I get home today. Maybe that will help. Attached Images __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project Last edited by Wgesnerjr; 04-16-2018 at 09:27 AM. Reason: add text

04-28-2018, 08:16 AM	#9
GonicGM Registered User Join Date: Mar 2014 Location: Rochester, NH Posts: 168	Re: WTB Tail pipe hangar Guy in NH parting 87 K10 diesel. He has a RH on it. Contact him Kurt six zero three seven three eight eight zero one seven. Truck is rotted and fully stripped but I saw that hanger on it Sunday, took image. __________________ 83 K30 SRW 350 TH400 NP205 4.10 9' Fisher 85 K30 SRW 350 TH400 NP205 4.10 87 V3500 Dually 454 TBI SM465 NP205 4.10 9' Fisher 83 K2500 350 TH700R4 8600GVW Dual Tank 4.10 1973 Cheyenne Super 30 DRW Std Cab Z83 4.10 1976 Silverado C30 Std Cab 4.10 DRW (4 sale)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.