|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-28-2018, 03:55 PM
|
#1 |
|
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Factory Clutch Bellcrank Pictures?
Hey guys, CRGRS 66 here, I am hoping to get some help from you guys with my clutch linkage, particularly the bell crank, and how it is mounted to the frame. I have a GM crate engine, just the regular 260HP 350, and the tapped hole on the block is in a different location than my old 66 283 was. . The 63-66 Bellcrank has a bend in it, the 73-87 Bellcrank is straight. I am thinking that I will order the 73-87 Bellcrank from Classic parts, but would like to see if the frame bracket on the 73-87's is the same as mine. Classic Parts lists the stud for the block as the same part number for 63 thru 87, so I should be good there.
Thanks in advance!
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
|
|
|
04-28-2018, 05:50 PM
|
#2 |
|
Active Member
 
Join Date: Oct 2017
Location: Northern Illinois
Posts: 168
|
Re: Factory Clutch Bellcrank Pictures?
Here is a picture of the one on my ‘77. Hope it helps.
|
|
|
|
|
04-28-2018, 07:12 PM
|
#3 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,536
|
Re: Factory Clutch Bellcrank Pictures?
Easy to build a bracket to mount the pivot ball too where you need it on your new motor.
Here’s some different ideas. https://www.google.com/search?tbm=is....0.U9eu7NVbyGk |
|
|
|
|
04-30-2018, 11:38 PM
|
#4 |
|
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: Factory Clutch Bellcrank Pictures?
Thanks guys, that helps.
I think I have a plan, might be a while, but I will post up what I come up with. Cheers CRGRS 66
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
