The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-23-2018, 07:59 PM   #1
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,817
Momentary foot switch

I have a project brewing that calls for a momentary switch. I'm thinking about a foot switch. I would like something that is nice and solid like the hi-lo beam switch, and I also like that way it is mounted with a couple of screws and you push it straight down. I have thought about the foot operated starter switches, but I'm not liking the way they mount at an angle.

Has anybody modified a hi-lo beam switch to work as a momentary switch, or know of a switch of similar size and construction to buy? I have searched the web over and came to the end of the internet without finding anything interesting. I have found some that fit in a hole in the floor, and I would rather have it mount on the floor and all the wiring be above-floor, like the hi-lo beam switch is wired. And I have found cheap plastic switches, but would rather have something I know is going to last for many years.

So, does anybody know of a sturdy metal switch that is momentary, mounts on the floor surface, and you push it straight down to make contact and contact is released when you lift your foot?
dmjlambert is offline   Reply With Quote
Old 06-23-2018, 10:43 PM   #2
K20super
Registered User
 
Join Date: Nov 2016
Location: Center ND
Posts: 73
Re: Momentary foot switch

Some old cars I have worked on in the past had a foot starter button that should work I don't remember the models though
K20super is offline   Reply With Quote
Old 06-24-2018, 03:49 AM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,663
Re: Momentary foot switch

my AD truck has one like this in it for a starter switch.......
http://www.alanco.com.au/product/SPB...ef_cat_id=8960
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 06-25-2018, 12:46 PM   #4
starterman99
Registered User
 
starterman99's Avatar
 
Join Date: Jun 2008
Location: santa maria,ca.
Posts: 312
Re: Momentary foot switch

The one like Mongo shows in link is Cole Hersee 9183BX and the same with a longer stem is Cole Hersee 9060BX they are used for liftgate pump motors and other momentary applications.
__________________
1957 3100
1950 5 window
starterman99 is offline   Reply With Quote
Old 06-25-2018, 03:27 PM   #5
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,817
Re: Momentary foot switch

Yes, thanks. It looks like I would have to fabricate some sort of small metal box or can to put it in, and then mount the box to the floor. I am surprised at how hard it is to find a surface mounted foot operated switch. Perhaps I just won't find one anywhere. It does not exist.
dmjlambert is offline   Reply With Quote
Old 06-26-2018, 02:02 PM   #6
Jackson's Dad 64 C10
Registered User
 
Jackson's Dad 64 C10's Avatar
 
Join Date: May 2018
Location: Mocksville, NC
Posts: 81
Re: Momentary foot switch

We always used Linemaster Foot Switches in all of the fire trucks that I've driven (was a firefighter for 12 years). We used them to activate the mechanical siren (Q Siren). They are not too expensive, and if they can handle a hosedragger trying to move traffic by putting his boot through the floor, I'm sure they will be ok for whatever application you have in mind!

Search "Linemaster Foot Switch", and you should get several options for purchase.

HTH

-Chris
Attached Images
 
Jackson's Dad 64 C10 is offline   Reply With Quote
Old 06-26-2018, 04:11 PM   #7
Killer Bee
Registered User
 
Killer Bee's Avatar
 
Join Date: Jan 2016
Location: Barber City, CA
Posts: 4,797
Re: Momentary foot switch

^ bingo! wrenched for LAFD for seven years, every rig, every year, same switch..
__________________
I started out with nothing - and I still have most of it
Killer Bee is offline   Reply With Quote
Old 06-26-2018, 05:28 PM   #8
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,817
Re: Momentary foot switch

Thanks, that looks like just the right thing and it is good to see testimonials about the durability.
dmjlambert is offline   Reply With Quote
Reply

Bookmarks

Tags
foot switch, momentary contact switch


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com