Help.. Wiper Motor wire diagram - The 1947 - Present Chevrolet & GMC Truck Message Board Network

COoverwatch · 06-28-2018, 12:13 PM

hi all,
I am in the home stretch of wiring up a 66 GMC and can't figure out the windshield wiper setup. Previous shop cut, yanked, pulled all the old wiring out as the owner was going to put in a new harness. needles to say I got the job of finishing it up.

the motor is a Delco Remy 12-volt Type E motor as stamped on the end, original part number 5045500. this has 3 connections together and one off by it self. pump has two wires still attached, blue and yellow. yellow has a connector on the end, blue doesn't. switch has four connection on the back. L, H, P and with I think is power in??

If anyone could help me out I would really appreciate it so I can move this project to the done column.

Name: switch.jpg
Views: 1841
Size: 62.4 KB

Name: switch.jpg
Views: 1841
Size: 62.4 KB

Name: pump model.jpg
Views: 1803
Size: 51.2 KB

Name: wiper connections.jpg
Views: 1873
Size: 59.3 KB

COoverwatch · 06-28-2018, 12:16 PM

here is a pick of the pump wiring.

Name: IMG_1680.jpg
Views: 2844
Size: 41.0 KB

**The Rocknrod** · 06-28-2018, 01:22 PM

Does this help?
http://67-72chevytrucks.com/vboard/s...5&postcount=18
Or:
http://67-72chevytrucks.com/vboard/s...19&postcount=4

COoverwatch · 06-28-2018, 08:36 PM

Thanks. these are the best examples I have seen.

my switch has 4 connections to it.?? I thought the power would have gone to the switch then to the wiper motor. but is seems the power goes to the motor. you think the other connection on the switch would go to ground? there is continuity from that connector to the other positions on the switch.

So if I turn to the first position I have continuity from B to L and nothing to the H or P.
second position I have continuity from B to H and nothing to L or P.
push the switch in and continuity from B to P. (didn't check to see if there was continuity to either L or H depending on which was selected.

thank you RocknRod for the info.

**MusicMan70** · 06-28-2018, 11:09 PM

I found this schematic

COoverwatch · 06-29-2018, 08:59 AM

these are great. My confusion is now with the switch. all these show a 3 connection switch. I have a 4th connection. not sure if that one should go to power or to ground.

I will wire things up as shown and try both with a fused jumper so as not to damage the motor.

06-28-2018, 12:13 PM	#1
COoverwatch Registered User Join Date: Jun 2017 Location: Elizabeth Colorado Posts: 37	Help.. Wiper Motor wire diagram hi all, I am in the home stretch of wiring up a 66 GMC and can't figure out the windshield wiper setup. Previous shop cut, yanked, pulled all the old wiring out as the owner was going to put in a new harness. needles to say I got the job of finishing it up. the motor is a Delco Remy 12-volt Type E motor as stamped on the end, original part number 5045500. this has 3 connections together and one off by it self. pump has two wires still attached, blue and yellow. yellow has a connector on the end, blue doesn't. switch has four connection on the back. L, H, P and with I think is power in?? If anyone could help me out I would really appreciate it so I can move this project to the done column.

06-28-2018, 12:16 PM	#2
COoverwatch Registered User Join Date: Jun 2017 Location: Elizabeth Colorado Posts: 37	Re: Help.. Wiper Motor wire diagram here is a pick of the pump wiring.

06-28-2018, 01:22 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Help.. Wiper Motor wire diagram Does this help? http://67-72chevytrucks.com/vboard/s...5&postcount=18 Or: http://67-72chevytrucks.com/vboard/s...19&postcount=4 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-28-2018, 08:36 PM	#4
COoverwatch Registered User Join Date: Jun 2017 Location: Elizabeth Colorado Posts: 37	Re: Help.. Wiper Motor wire diagram Thanks. these are the best examples I have seen. my switch has 4 connections to it.?? I thought the power would have gone to the switch then to the wiper motor. but is seems the power goes to the motor. you think the other connection on the switch would go to ground? there is continuity from that connector to the other positions on the switch. So if I turn to the first position I have continuity from B to L and nothing to the H or P. second position I have continuity from B to H and nothing to L or P. push the switch in and continuity from B to P. (didn't check to see if there was continuity to either L or H depending on which was selected. thank you RocknRod for the info. Last edited by COoverwatch; 06-28-2018 at 08:42 PM.

06-28-2018, 11:09 PM	#5
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: Help.. Wiper Motor wire diagram I found this schematic Attached Images __________________ MusicMan70 1961 GMC Suburban

06-29-2018, 08:59 AM	#6
COoverwatch Registered User Join Date: Jun 2017 Location: Elizabeth Colorado Posts: 37	Re: Help.. Wiper Motor wire diagram these are great. My confusion is now with the switch. all these show a 3 connection switch. I have a 4th connection. not sure if that one should go to power or to ground. I will wire things up as shown and try both with a fused jumper so as not to damage the motor.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.