47-55.1 Picked up the 3;55 from the machine shop today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pvienneau · 07-03-2018, 09:16 AM

Picked up the torque tube with the upgraded 3.55. Machinist was hard to find but he did an outstanding job. Made sure the lash was perfect. Just need to drop it back in to the rear axle. Does anyone know if these driveshafts are interchangeable or not with all 49 3100 rear ends? I'd like to drop this one into another truck than which it came out of.

**mr48chev** · 07-03-2018, 01:13 PM

Should be interchangeable parts as long as the housings are the same. Simply meaning that if you hadn't swapped gears you probably wouldn't have given swapping the thirdmember/torque tube between housings a second thought and would be done already.

pvienneau · 07-03-2018, 01:40 PM

I did the tear down of the 4.11 and then did as much work as possible on the 6 foot Pinion and ring gear set up for 3.55, then brought these 2 large parts (pinion shaft, ring gear on Third member) along with the spider gears etc.. to the machine shop and a guy with 42 years rear end experience doing cars and trucks of all sizes. No one would do the job but this guy said "I look forward to the challenge of an old Chevy, done so many Jeeps". It looks so good I want to put it in my running 3100 which is still 4.11.

**mr48chev** · 07-05-2018, 04:01 PM

Cool, I understand that. As long as it is the same wheelbase with a trans set up for a torque tube you should be good to go.

07-03-2018, 09:16 AM	#1
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Picked up the 3;55 from the machine shop today Picked up the torque tube with the upgraded 3.55. Machinist was hard to find but he did an outstanding job. Made sure the lash was perfect. Just need to drop it back in to the rear axle. Does anyone know if these driveshafts are interchangeable or not with all 49 3100 rear ends? I'd like to drop this one into another truck than which it came out of. __________________ Pat 1949 unmolested Indy Farm Deluxe AD 1949 Standard 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=581544

07-03-2018, 01:13 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: Picked up the 3;55 from the machine shop today Should be interchangeable parts as long as the housings are the same. Simply meaning that if you hadn't swapped gears you probably wouldn't have given swapping the thirdmember/torque tube between housings a second thought and would be done already. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-03-2018, 01:40 PM	#3
pvienneau Registered User Join Date: Aug 2011 Location: Boston, MA Posts: 695	Re: Picked up the 3;55 from the machine shop today I did the tear down of the 4.11 and then did as much work as possible on the 6 foot Pinion and ring gear set up for 3.55, then brought these 2 large parts (pinion shaft, ring gear on Third member) along with the spider gears etc.. to the machine shop and a guy with 42 years rear end experience doing cars and trucks of all sizes. No one would do the job but this guy said "I look forward to the challenge of an old Chevy, done so many Jeeps". It looks so good I want to put it in my running 3100 which is still 4.11. __________________ Pat 1949 unmolested Indy Farm Deluxe AD 1949 Standard 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=581544

07-05-2018, 04:01 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: Picked up the 3;55 from the machine shop today Cool, I understand that. As long as it is the same wheelbase with a trans set up for a torque tube you should be good to go. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.